<?xml version="1.0"?>
<doc>
    <assembly>
        <name>Syncfusion.DocToPDFConverter.Base</name>
    </assembly>
    <members>
        <member name="T:Syncfusion.DocToPDFConverter.DocToPDFConverter">
            <summary>
            This class provides support for converting WordDocument into an PDF Document.
            </summary>
            <seealso cref="T:Syncfusion.DocIO.DLS.WordDocument"/>
            <seealso cref="T:Syncfusion.Pdf.PdfDocument"/>
            <remarks>This class is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
            <example>
            This example converts the specified Word Document in to PDF Document.
            <code lang="C#">
                //Loads an existing Word document
                WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
                //Instantiation of DocToPDFConverter for Word to PDF conversion
                DocToPDFConverter converter = new DocToPDFConverter();
                //Converts Word document into PDF document
                PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                //Releases all resources used by the object.
                converter.Dispose();
                //Closes the instance of document objects
                pdfDocument.Close(true);
                wordDocument.Close();
            </code>
            <code lang="VB">
                'Loads an existing Word document
                Dim wordDocument As New WordDocument("Template.docx", FormatType.Docx)
                'Instantiation of DocToPDFConverter for Word to PDF conversion
                Dim converter As New DocToPDFConverter()
               'Converts Word document into PDF document
                Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                'Releases all resources used by the object.
                converter.Dispose();
                'Closes the instance of document objects
                pdfDocument.Close(true);
                wordDocument.Close();
            </code>
            </example>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverter.m_settings">
            <summary>
            converter settings to the document
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverter.m_flag">
            <summary>
            The m_flag
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverter.PageSettings">
            <summary>
            Gets the page settings.
            </summary>
            <value>The page settings.</value>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverter.Settings">
            <summary>
            Gets or sets the quality.
            </summary>
            <remarks>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverter.IsCanceled">
            <summary>
            Gets a value indicating whether this conversion has been canceled.
            </summary>
            <value>
            <c>true</c> if this conversion is canceled; otherwise, <c>false</c>.
            </value>
            <remarks>This method is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverter.IsTrial">
            <summary>
            Gets or sets a value indicating whether the PDF document was generated using web service.
            </summary>
            <value>
            <c>true</c> if the PDF document was generated using web service; otherwise, <c>false</c>.
            </value>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.#ctor">
            <summary>
            Initializes a new instance of the <see cref="T:Syncfusion.DocToPDFConverter.DocToPDFConverter"/> class.
            </summary>
            <remarks>This constructor is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
             <example>
            This example converts the specified Word Document in to PDF Document.
            <code lang="C#">
                //Loads an existing Word document
                WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
                //Instantiation of DocToPDFConverter for Word to PDF conversion
                DocToPDFConverter converter = new DocToPDFConverter();
                //Converts Word document into PDF document
                PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                //Releases all resources used by the object.
                converter.Dispose();
                //Closes the instance of document objects
                pdfDocument.Close(true);
                wordDocument.Close();
            </code>
            <code lang="VB">
                'Loads an existing Word document
                Dim wordDocument As New WordDocument("Template.docx", FormatType.Docx)
                'Instantiation of DocToPDFConverter for Word to PDF conversion
                Dim converter As New DocToPDFConverter()
               'Converts Word document into PDF document
                Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                'Releases all resources used by the object.
                converter.Dispose();
                'Closes the instance of document objects
                pdfDocument.Close(true);
                wordDocument.Close();
            </code>
            </example>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.Close">
            <summary>
            Release the resources occupied by this <see cref="T:Syncfusion.DocToPDFConverter.DocToPDFConverter"/> instance.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.Dispose">
            <summary>
            Releases all resources used by the object.
            </summary>
            <remarks>This method is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
             <example>
            This example converts the specified Word Document in to PDF Document.
            <code lang="C#">
                //Loads an existing Word document
                WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
                //Instantiation of DocToPDFConverter for Word to PDF conversion
                DocToPDFConverter converter = new DocToPDFConverter();
                //Converts Word document into PDF document
                PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                //Releases all resources used by the object.
                converter.Dispose();
                //Closes the instance of document objects
                pdfDocument.Close(true);
                wordDocument.Close();
            </code>
            <code lang="VB">
                'Loads an existing Word document
                Dim wordDocument As New WordDocument("Template.docx", FormatType.Docx)
                'Instantiation of DocToPDFConverter for Word to PDF conversion
                Dim converter As New DocToPDFConverter()
               'Converts Word document into PDF document
                Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                'Releases all resources used by the object.
                 converter.Dispose();
                'Closes the instance of document objects
                pdfDocument.Close(true);
                wordDocument.Close();
            </code>
            </example>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.ConvertToPDF(Syncfusion.DocIO.DLS.WordDocument)">
            <summary>
            Converts the specified WordDocument to PDF.
            </summary>
            <param name="wordDocument">The word document.</param>
            <returns>The PdfDocument.</returns>
            <remarks>This method is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. 
            If running the application by hosting in Azure environment, <see cref="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.EnableFastRendering"/> is enabled automatically.</remarks>
            <example>
            This example converts the specified Word Document in to PDF Document.
            <code lang="C#">
                //Loads an existing Word document
                WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
                //Instantiation of DocToPDFConverter for Word to PDF conversion
                DocToPDFConverter converter = new DocToPDFConverter();
                //Converts Word document into PDF document
                PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                //Releases all resources used by the object.
                converter.Dispose();
                //Closes the instance of document objects
                pdfDocument.Close(true);
                wordDocument.Close();
            </code>
            <code lang="VB">
                'Loads an existing Word document
                Dim wordDocument As New WordDocument("Template.docx", FormatType.Docx)
                'Instantiation of DocToPDFConverter for Word to PDF conversion
                Dim converter As New DocToPDFConverter()
               'Converts Word document into PDF document
                Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                'Releases all resources used by the object.
                converter.Dispose();
                'Closes the instance of document objects
                pdfDocument.Close(true);
                wordDocument.Close();
            </code>
            </example>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.UpdateTrackChangesBalloonsCount(Syncfusion.DocIO.DLS.Rendering.DocumentLayouter)">
            <summary>
            Check and set balloon count for track changes.
            </summary>
            <param name="layouter"></param>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.EmbedDocumentFonts">
            <summary>
            Embed the Document fonts in the private font collection.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.GetFontStreamName(System.IO.Stream)">
            <summary>
            Gets the font name from the given stream.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.IsValidFontStream(System.IO.Stream)">
            <summary>
            Check whether the font stream is valid
            ToDo : Need to implement similar method for Word to Image
            </summary>
            <param name="fontStream">Stream from which font instance will be created.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.DeObfuscateFont(System.IO.Stream,System.IO.MemoryStream,System.String)">
            <summary>
            Convert ODTTF font stream to TTF font stream.
            </summary>
            <param name="font">ODTTF font stream</param>
            <param name="outStream">TTF font stream</param>
            <param name="fontGuid">embed font key</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.ConvertToPDF(System.String)">
            <summary>
            Converts the specified WordDocument to PDF.
            </summary>
            <param name="fileName">Name of the file.</param>
            <returns>The PdfDocument.</returns>
            <remarks>This method is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. 
            If running the application by hosting in Azure environment, <see cref="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.EnableFastRendering"/> is enabled automatically.</remarks>
            <example>
            This example converts the specified Word Document in to PDF Document.
            <code lang="C#">
                //Instantiation of DocToPDFConverter for Word to PDF conversion
                DocToPDFConverter converter = new DocToPDFConverter();
                //Converts the specified WordDocument to PDF.
                PdfDocument pdfDocument = converter.ConvertToPDF("Template.docx");
                //Saves the PDF file
                pdfDocument.Save("WordtoPDF.pdf");
                //Releases all resources used by the object.
                converter.Dispose();
                //Closes the instance of document objects
                pdfDocument.Close(true);
            </code>
            <code lang="VB">
               'Creates an instance of the DocToPDFConverter
                Dim converter As New DocToPDFConverter() for Word to PDF conversion
               'Instantiation of DocToPDFConverter
                Dim pdfDocument As PdfDocument = converter.ConvertToPDF("Template.docx")
                'Save the document in the given name and PDF format
                pdfDocument.Save("WordtoPDF.pdf");
                'Releases all resources used by the object.
                converter.Dispose();
                'Closes the instance of document objects
                pdfDocument.Close(true);
            </code>
            </example>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.ConvertToPDF(System.IO.Stream)">
            <summary>
            Converts to PDF.
            </summary>
            <param name="stream">The stream.</param>
            <returns>The PdfDocument.</returns>
            <remarks>This method is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. 
            If running the application by hosting in Azure environment, <see cref="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.EnableFastRendering"/> is enabled automatically.</remarks>
            <example>
            This example converts the specified Word Document in to PDF Document.
            <code lang="C#">
                //Loads an existing Word document
                Stream fileStream = new FileStream("Template.docx", FileMode.Open, FileAccess.Read, FileShare.Read);
                //Instantiation of DocToPDFConverter for Word to PDF conversion
                DocToPDFConverter converter = new DocToPDFConverter();
                //Converts the specified WordDocument to PDF.
                PdfDocument pdfDocument = converter.ConvertToPDF(fileStream);
                //Save the document in the given name and PDF format
                pdfDocument.Save("WordtoPDF.pdf");
                //Releases all resources used by the object.
                converter.Dispose();
                //Closes the instance of document objects
                fileStream.Close();
                pdfDocument.Close(true);
            </code>
            <code lang="VB">
                //Loads an existing Word document
                Dim fileStream As Stream = New FileStream("Template.docx", FileMode.Open, FileAccess.Read, FileShare.Read)
               'Instantiation of DocToPDFConverter for Word to PDF conversion
                Dim converter As New DocToPDFConverter()
               'Converts Word document into PDF document
                Dim pdfDocument As PdfDocument = converter.ConvertToPDF(fileStream)
                'Save the document in the given name and PDF format
                pdfDocument.Save("WordtoPDF.pdf");
                'Releases all resources used by the object.
                converter.Dispose();
                'Closes the instance of document objects
                fileStream.Close();
                pdfDocument.Close(true);
            </code>
            </example>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.CreateDocument">
            <summary>
            Creates the PDF document.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.AddSection(Syncfusion.DocIO.DLS.WPageSetup)">
            <summary>
            Adds the section.
            </summary>
            <param name="pageSetup">The page setup.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.InitPagesSettings(Syncfusion.DocIO.DLS.Rendering.DocumentLayouter)">
            <summary>
            Sets the pages settings.
            </summary>
            <param name="layouter">The layouter.</param>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.AddDocumentProperties(Syncfusion.DocIO.DLS.BuiltinDocumentProperties)">
            <summary>
            Adds the document properties.
            </summary>
            <param name="docProperties">The doc properties.</param>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.AddHyperLinks(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Rendering.HyperlinkAnnotation})">
            <summary>
            Adds the hyper links.
            </summary>
            <param name="hyperlinks">The hyperlinks.</param>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.ScaleRectangle(System.Drawing.RectangleF)">
            <summary>
            Scale the given rectangle bounds with specified scaling factor.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.HasParentNode(System.Int32@,System.Int32[],System.Int32)">
            <summary>
            Getting Parent Node for the levels of the Bookmarks
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.DrawToPDF(Syncfusion.DocIO.DLS.Rendering.DocumentLayouter)">
            <summary>
            Draw To PDF
            </summary>
            <param name="layouter">The DocumentLayouter</param>
            <returns>PdfDocument</returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.CreateTempStreams(System.Collections.Generic.Dictionary{System.String,System.IO.Stream})">
            <summary>
            Create temp font stream
            </summary>
            <param name="fontStreams">Actual font streams</param>
            <returns>Temp font streams</returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.DrawDirectWordToPDF(Syncfusion.DocIO.DLS.Rendering.DocumentLayouter)">
            <summary>
            Draw To PDF
            </summary>
            <param name="layouter">The DocumentLayouter</param>
            <returns>PdfDocument</returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.AddSmartArtBookmarkHyperlink(System.Int32)">
            <summary>
            Adds SmartArt bookmark hyperlinks to the current PDF page based on the provided page index.
            </summary>
            <param name="pageIndex">The index of the current page where the hyperlink should be added.</param>
            <remarks>
            This method retrieves bookmark hyperlinks from the document and checks if they match any SmartArt bookmark hyperlinks.
            If a match is found, a PDF annotation is created and linked to the corresponding target bookmark.
            </remarks>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.ShowWarnings">
            <summary>
            Shows the warnings.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.DocToPDFConverter.CreateWarningElmentNames">
            <summary>
            Create warning element names into the list
            </summary>
            <returns></returns>
        </member>
        <member name="T:Syncfusion.DocToPDFConverter.RenderBaseHelper">
            <summary>
            Represents a class to get fallback fonts during Direct PDF conversion.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.RenderBaseHelper.EmbedFonts">
            <summary>
            Gets or sets a value indicating whether to embed fonts to converted PDF in Word to PDF conversion.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.RenderBaseHelper.EmbedCompleteFonts">
            <summary>
            Gets or sets a value indicating whether to embed the complete font information in the resultant PDF document.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPDFConverter.RenderBaseHelper.GetFallbackFont(System.Drawing.Font,System.String,Syncfusion.Office.FontScriptType,Syncfusion.DocIO.DLS.WCharacterFormat,System.Collections.Generic.List{Syncfusion.Office.FallbackFont},System.Collections.Generic.Dictionary{System.String,System.IO.Stream})">
            <summary>
            Gets fall back font to preserve the text in converted PDF document.
            </summary>
            <param name="font">Represent original font.</param>
            <param name="text">Represent a input text.</param>
            <param name="scriptType">Represent the scriptType of a input text.</param>
            <param name="charFormat">Represent the character format of a input text.</param>
            <param name="fallbackFonts">Represent the fallback fonts list.</param>
            <param name="fontStreams">Represent the substituted or Embedded fonts collection.</param>
            <returns>Returns fallback font if it has; otherwise returns original font.</returns>
        </member>
        <member name="T:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings">
            <summary>
            Represent class with setting of converter.
            </summary>
            <example>This example illustrates DocToPDFConverter settings.
            <remarks>This class is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
            <code lang = "C#">
               //Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               //Instantiation of DocToPDFConverter for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Skip the updating process for Alternate chunks in the Word document
               converter.Settings.EnableAlternateChunks = false;
               //Sets the image resolution
               converter.Settings.ImageResolution = 640;
               //Sets the jpeg image quality to reduce the Pdf file size
               converter.Settings.ImageQuality = 100;
               //Sets true to optimize the memory usage for identical image
               converter.Settings.OptimizeIdenticalImages = false;
               //Sets the PdfConformanceLevel
               converter.Settings.PdfConformanceLevel = PdfConformanceLevel.None;
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();   
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Closes the instance of PDF document object
               pdfDocument.Close(true);
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiation of DocToPDFConverter for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Skip the updating process for Alternate chunks in the Word document
               converter.Settings.EnableAlternateChunks = False
               'Sets the image resolution
               converter.Settings.ImageResolution = 640
               'Sets the jpeg image quality to reduce the Pdf file size
               converter.Settings.ImageQuality = 100
               'Sets true to optimize the memory usage for identical image
               converter.Settings.OptimizeIdenticalImages = False
               'Sets the PdfConformanceLevel
               converter.Settings.PdfConformanceLevel = PdfConformanceLevel.None
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.m_enableAlternateChunks">
            <summary>
            Need to enable the Alternate chunks element
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.m_enableFastRendering">
            <summary>
            Need to enable the direct PDF rendering
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.m_updateDocumentFields">
            <summary>
            Need to update the fields present in the document.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.m_imageQuality">
            <summary>
            Indicates the quality of the image.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.m_preserveFormFields">
             <summary>
            Indicates whether to preserve the Word document form fields as PDF document form fields
             </summary>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.m_imageResolution">
            <summary>
            Indicates the Image resolution
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.m_warning">
            <summary>
            The m_warning
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.m_applyMatteToTransparentImages">
            <summary>
            Indicates whether a matte color should be applied to transparent images during Word to PDF conversion.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.AutoDetectComplexScript">
            <summary>
            Gets or sets a value indicates to automatically detect the complex script text present in the Word document during PDF conversion. Default value is <b>false</b>.
            </summary>
            <value><b>True</b>if it is necessary to automatically detect the complex script text present in the Word document during PDF conversion; otherwise, <b>false</b>.</value>
            <remarks>Set this property to true, only if you have complex script text that is not marked as complex script type (CharacterFormat.ComplexScript is false) in the Word document.
            You can mark a text as complex script by enabling the WTextRange.CharacterFormat.ComplexScript property.
            Since automatic detection of complex script text involves validation of all the text in the document and may impact proportionally in Word to PDF conversion performance.</remarks>
            <example>This example illustrates AutoDetectComplexScript property of DocToPDFConverter settings.        
            <code lang = "C#">
               //Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               //Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Sets AutoDetectComplexScript property as true, to detect the complex scripts automatically
               converter.Settings.AutoDetectComplexScript = true;
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Closes the instance of PDF document object
               pdfDocument.Close(true);       
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Sets AutoDetectComplexScript property as true, to detect the complex scripts automatically
               converter.Settings.AutoDetectComplexScript = True
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.RecreateNestedMetafile">
            <summary>
            Gets or sets a value that indicates whether to regenerate the nested Metafile images present in the Word document during PDF conversion. Default value is<b>false</b>.
            </summary>
            <value><b>True</b> if it is necessary to regenerate the nested Metafile images present in the Word document during PDF conversion; otherwise <b>false</b>.</value>
            <example>This example illustrates RecreateNestedMetafile property of DocToPDFConverter settings.        
            <code lang = "C#">
               //Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               //Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Sets RecreateNestedMetafile property to true to Recreate the Nested Metafile automatically
               converter.Settings.RecreateNestedMetafile = true;
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Closes the instance of PDF document object
               pdfDocument.Close(true);       
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Sets RecreateNestedMetafile property to true to Recreate the Nested Metafile automatically
               converter.Settings.RecreateNestedMetafile = True
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.EnableAlternateChunks">
            <summary>
            Gets or sets a value indicates to enable the Alternate chunks present in the Word document . Default value is <b>True</b>.
            </summary>
            <value><b>True</b> if need to enable the Alternate chunks; otherwise, <b>false</b>.</value>
            <remarks>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.EnableFastRendering">
            <summary>
            Gets or sets a value that indicates whether to convert PDF faster by using direct PDF rendering. The default value is <b>true</b>.
            </summary>
            <value><b>True</b> - If true, converts PDF faster by using the direct PDF rendering approach (default). Otherwise uses EMF rendering. Otherwise, <b>false</b>.</value>
            <remarks><b>PDF rendering</b> – Directly renders a Word document to PDF. This is the default and recommended approach, offering faster and more efficient conversion. 
            Available since the 2016 Volume 4 release.<br/>
            <b>EMF rendering</b> – Converts a Word document to EMF and render the generated EMF to PDF during Word to PDF conversion. 
            This is a legacy approach retained to maintain compatibility for earlier versions.</remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.PreserveFormFields">
            <summary>
             Gets or sets a value that indicates whether to preserve Word document form field as editable PDF form field.Default value is<b>false</b>.
            </summary> 
            <value><b>True</b>If True, converts Word document form field as editable PDF form field in Word to PDF conversion. Otherwise editable form field will be preserved as text in Word to PDF conversion <b>false</b>.</value>
            <example>
            <code lang="c#">
              //Loads an existing Word document
              WordDocument wordDocument = new WordDocument(@"TemplateFormFields.docx");
              //Instantiates DocToPDFConverter instance for Word to PDF conversion
              DocToPDFConverter converter = new DocToPDFConverter();
              //Sets to preserve the Word document form field as editable PDF form field in PDF document.
              converter.Settings.PreserveFormFields = true;
              //Converts Word document into PDF document
              PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
              //Releases the resources occupied by DocToPDFConverter instance
              converter.Dispose();
              //Closes the instance of Word document object
              wordDocument.Close();
              //Saves the PDF file 
              pdfDocument.Save("WordtoPDF.pdf");
              //Closes the instance of PDF document object
              pdfDocument.Close(true);      
             </code>
             <code lang="VB">
              'Loads an existing Word document
              Dim wordDocument As WordDocument = New WordDocument(@"TemplateFormFields.docx")
              'Instantiates DocToPDFConverter instance for Word to PDF conversion
              Dim converter As DocToPDFConverter = New DocToPDFConverter()
              'Sets to preserve the Word document form field as editable PDF form field in PDF document.
              converter.Settings.PreserveFormFields = True
              'Converts Word document into PDF document
              Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
              'Releases the resources occupied by DocToPDFConverter instance
              converter.Dispose()
              'Closes the instance of Word document object
              wordDocument.Close()
              'Saves the PDF file 
              pdfDocument.Save("WordtoPDF.pdf")
              'Closes the instance of PDF document object
              pdfDocument.Close(True)     
             </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.UpdateDocumentFields">
            <summary>
            Gets or sets a value that indicates whether to update fields present in the Word document while converting a Word document to PDF.Default value is <b>false</b>.
            </summary>
            <value><b>True</b> If true, updates the fields present in the Word document during Word to PDF conversion. otherwise, <b>false</b>.</value>
            <remarks>
            <para> This API is alternative for UpdateDocumentFields() <see cref="M:Syncfusion.DocIO.DLS.WordDocument.UpdateDocumentFields"/> to improve performance, if your requirement is to update the fields and convert the Word document to PDF.</para>
            <para>You can remove UpdateDocumentFields() method and enable UpdateDocumentFields <see cref="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.UpdateDocumentFields"/> property to update the Word document fields and convert the Word document to PDF in optimized way.</para>
            </remarks>
            <example>
            <para>The following code example demonstrates how to update the fields present while performing Word to PDF conversion.</para>
            <code lang = "C#">
               //Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               //Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Updates the fields present in Word document
               converter.Settings.UpdateDocumentFields = true;
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Closes the instance of PDF document object
               pdfDocument.Close(true);       
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Updates the fields present in Word document
               converter.Settings.UpdateDocumentFields = True
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.ImageQuality">
            <summary>
            Gets or sets the quality. The value indicates in percentage, max value represents best quality and min value represents best compression.
            </summary>
            <remarks>
            The value indicates in percentage, max value represents best quality and min value represents best compression
            This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only.
            </remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.ImageResolution">
            <summary>
            Sets the image resolution to the image, which are Embedded
            in the Word document
            </summary>
            <remarks>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.OptimizeIdenticalImages">
            <summary>
            Gets/Sets a value indicating whether to optimize the memory usage for the identical (duplicate) images in Doc to Pdf conversion and converted Pdf document.
            </summary>
            <remarks>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.Warning">
            <summary>
            Gets or sets the warning that describes the unsupported elements found while converting the specified Word document to PDF.
            </summary>
            <value>
            The warning.
            </value>
            <remarks>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.PdfConformanceLevel">
            <summary>
            Gets or sets the Pdf document's Conformance-level.
            </summary>
            <value>The <see cref="T:Syncfusion.Pdf.PdfConformanceLevel"/> of the PDF document.</value>
            <remarks>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only. </remarks>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.EmbedFonts">
            <summary>
            Gets or sets a value indicating whether to embed fonts in the converted PDF document. Default value is <b>false</b>
            </summary>
            <value>
            <b>True:</b> if need to embed fonts in the converted PDF document; otherwise, <b>False</b>.
            </value>
            <remarks>
            <list type="bullet">
            <item>This property is supported to embed TrueType fonts only.</item>
            <item>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only.</item>
            </list>
            </remarks>      
            <example>This example illustrates EmbedFonts property of DocToPDFConverter settings.        
            <code lang = "C#">
               //Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               //Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Sets EmbedFonts property as true, to embed fonts in resultant PDF
               converter.Settings.EmbedFonts = true;
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Closes the instance of PDF document object
               pdfDocument.Close(true);        
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Sets EmbedFonts property as true, to embed fonts in resultant PDF
               converter.Settings.EmbedFonts = True
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.PreserveOleEquationAsBitmap">
            <summary>
            Gets or sets a value indicating whether to preserve ole equation as bitmap while converting a Word document ot PDF. Default value is <b>false</b>
            </summary>
            <value>
            <b>True:</b> if need to preserve the ole equation as bitmap; otherwise, <b>False</b>.
            </value>     
            <example>This example illustrates PreserveOleEquationAsBitmap of DocToPDFConverter settings.        
            <code lang = "C#">
               //Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               //Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Sets PreserveOleEquationAsBitmap property as true, to preserve the ole equation as bitmap in resultant PDF
               converter.Settings.PreserveOleEquationAsBitmap = true;
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Closes the instance of PDF document object
               pdfDocument.Close(true);        
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Sets PreserveOleEquationAsBitmap property as true, to preserve the ole equation as bitmap in resultant PDF
               converter.Settings.PreserveOleEquationAsBitmap = True
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.EmbedCompleteFonts">
            <summary>
            Gets or sets a value indicating whether to embed the complete font information in the converted PDF document. Default value is <b>false</b>
            </summary>
            <value>
            <b>True:</b> if need to embed the complete font information in the converted PDF document; otherwise, <b>False</b>.
            </value>
            <remarks>        
            <list type="bullet">
            <item>This property is used to indicate whether the complete font information of 
            the characters in the resultant PDF document to embedded or not.</item>
            <item>This property is supported to embed TrueType fonts only.</item>
            <item>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only.</item>
            </list>
            </remarks> 
            <example>This example illustrates EmbedCompleteFonts property of DocToPDFConverter settings.        
            <code lang = "C#">
               //Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               //Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Sets the embed complete font information in converted PDF
               converter.Settings.EmbedCompleteFonts = true;
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Closes the instance of PDF document object
               pdfDocument.Close(true);       
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Sets the embed complete font information in converted PDF
               converter.Settings.EmbedCompleteFonts = True
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.AutoTag">
            <summary>
             Gets or sets a value indicates whether the converted PDF document is tagged or not.  Default value is <b>false</b>
            </summary>
            <value>
             <b>True:</b> if need to preserve the accessible structure tags from Word document to the converted PDF; otherwise, <b>False</b>.
            </value>
            <remarks>        
            <list type="bullet">
            <remarks> Set this property as true, to preserve the accessible structure tags from Word document to the converted PDF. Using this property Word documents can be converted to PDF with 508 compliance.
            Setting this property as true will automatically enable <see cref="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.EnableFastRendering"/> property </remarks>.
            <item>This property will set the title and description for images, diagrams and other objects in the generated PDF document. This information is useful for people with vision or cognitive impairments who may not able to see or understand the object </item>
            <item>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only.</item>
            <item>This property is only applicable while converting the Word document as PDF document.</item>
            </list>
            </remarks> 
            <example>This example illustrates how to convert an Word document to PDF with AutoTag property.        
            <code lang = "C#">
               //Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               //Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Sets the accessible structure tags in converted PDF
               converter.Settings.AutoTag = true;
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Closes the instance of PDF document object
               pdfDocument.Close(true);       
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Sets the accessible structure tags in converted PDF
               converter.Settings.AutoTag = True
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.ExportBookmarks">
            <summary>
             Gets or sets a value indicates whether to export Word document headings or bookmarks as PDF bookmarks while performing Word to PDF conversion. Default value is <b>ExportBookmarkType.Bookmarks<see cref="F:Syncfusion.DocIO.ExportBookmarkType.Bookmarks"/></b>
            </summary>
            <value>
            The <see cref="T:Syncfusion.DocIO.ExportBookmarkType"/> member specifies whether Word headings or bookmarks need to be considered in Word to PDF conversion.
            </value>
            <remarks>
            <list>
            <item>The <see cref="F:Syncfusion.DocIO.ExportBookmarkType.Headings"/> will consider only headings within the main document and text boxes not within headers, footers, endnotes, footnotes, or comments.</item>
            <item>This property is supported on Windows Forms, WPF, ASP.NET and ASP.NET MVC platforms only.</item>
            <item>This property is only applicable while converting the Word document as PDF document.</item>
            </list>
            </remarks> 
            <example>This example illustrates how to convert an Word document headings to PDF Bookmarks with the help of ExportBookmark property.        
            <code lang = "C#">
              //Creates a new Word document
              WordDocument wordDocument = new WordDocument();
              //Add a section into the word document
              IWSection section = wordDocument.AddSection();
              //Add a paragraph into the section
              IWParagraph paragraph = section.AddParagraph();
              //Add a text into the paragraph
              paragraph.AppendText("First Chapter1");
              //Apply style for the text
              paragraph.ApplyStyle(BuiltinStyle.Heading1);
              paragraph.AppendText("First Chapter2");
              paragraph.ApplyStyle(BuiltinStyle.Heading2);
              paragraph.AppendText("First Chapter3");
              paragraph.ApplyStyle(BuiltinStyle.Heading3);
               //Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Sets ExportBookmarks for preserving Word document headings as PDF bookmarks
                converter.Settings.ExportBookmarks = Syncfusion.DocIO.ExportBookmarkType.Headings; 
               //Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               //Closes the instance of Word document object
               wordDocument.Close();
               //Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose();
               //Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               //Closes the instance of PDF document object
               pdfDocument.Close(true);       
            </code>
            <code lang = "VB">
               'creates a new Word document
               Dim wordDocument As WordDocument = New WordDocument()
               'Add a section into the word document
               Dim section As IWSection = wordDocument.AddSection()
               'Add a paragraph into the section
               Dim paragraph As IWParagraph = section.AddParagraph();
              'Add a text into the paragraph
               paragraph.AppendText("First Chapter1");
              'Apply style for the text
               paragraph.ApplyStyle(BuiltinStyle.Heading1);
               paragraph.AppendText("First Chapter2");
               paragraph.ApplyStyle(BuiltinStyle.Heading2);
               paragraph.AppendText("First Chapter3");
               paragraph.ApplyStyle(BuiltinStyle.Heading3);
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Sets ExportBookmarks for preserving Word document headings as PDF bookmarks
                converter.Settings.ExportBookmarks = Syncfusion.DocIO.ExportBookmarkType.Headings
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="P:Syncfusion.DocToPDFConverter.DocToPDFConverterSettings.ApplyMatteToTransparentImages">
            <summary>
            Gets or sets a value that indicates whether a matte color should be applied to transparent images during Word to PDF conversion. Default value is <b>false</b>.
            </summary>
            <value>
            <b>True</b> if a matte color should be applied to transparent images during PDF conversion; otherwise, <b>false</b>.
            </value>
            <remarks>
            When this property is enabled, the conversion process analyzes each image in the Word document to detect transparent regions and applies a matte color to required transparent images.
            This helps prevent visual artifacts such as borders around transparent pixels in the resulting PDF.
            To minimize performance impact from pixel-level image analysis, this feature is offered as an opt-in setting.
            </remarks>
            <example>
            This example illustrates the <c>ApplyMatteToTransparentImages</c> property of DocToPDFConverter settings.
            <code lang="c#">
               // Loads an existing Word document
               WordDocument wordDocument = new WordDocument("Template.docx", FormatType.Docx);
               // Instantiates DocToPDFConverter instance for Word to PDF conversion
               DocToPDFConverter converter = new DocToPDFConverter();
               //Set to true to apply a matte color to transparent images.
               converter.Settings.ApplyMatteToTransparentImages = true;
               // Converts Word document into PDF document
               PdfDocument pdfDocument = converter.ConvertToPDF(wordDocument);
               // Closes the Word document
               wordDocument.Close();
               // Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf");
               // Releases resources
               converter.Dispose();
               pdfDocument.Close(true);
            </code>
            <code lang = "VB">
               'Loads an existing Word document
               Dim wordDocument As WordDocument = New WordDocument("Template.docx", FormatType.Docx)
               'Instantiates DocToPDFConverter instance for Word to PDF conversion
               Dim converter As DocToPDFConverter = New DocToPDFConverter()
               'Set to true to apply a matte color to transparent images.
               converter.Settings.ApplyMatteToTransparentImages = True
               'Converts Word document into PDF document
               Dim pdfDocument As PdfDocument = converter.ConvertToPDF(wordDocument)
               'Closes the instance of Word document object
               wordDocument.Close()
               'Saves the PDF file
               pdfDocument.Save("WordtoPDF.pdf")
               'Releases the resources occupied by DocToPDFConverter instance
               converter.Dispose()
               'Closes the instance of PDF document object
               pdfDocument.Close(True)
            </code>
            </example>
        </member>
        <member name="F:Syncfusion.DocIO.Rendering.ShapePath._rectBounds">
             <summary>
            
             </summary>
        </member>
        <member name="F:Syncfusion.DocIO.Rendering.ShapePath._shapeGuide">
             <summary>
            
             </summary>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.#ctor(System.Drawing.RectangleF,System.Collections.Generic.Dictionary{System.String,System.String})">
             <summary>
            
             </summary>
             <param name="bounds"></param>
             <param name="shapeGuide"></param>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCurvedConnectorPath">
            <summary>
            Get Curved Connector path
            </summary>
            <formula>
            formulaColl.Add("x2","*/ w adj1 100000");
            formulaColl.Add("x1","+/ l x2 2");
            formulaColl.Add("x3","+/ r x2 2");
            formulaColl.Add("y3","*/ h 3 4");
            </formula>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCurvedConnector2Path">
            <summary>
            This method is used to get the Curved connector 2 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCurvedConnector4Path">
            <summary>
            This method is used to call the Get Curved Connector 4 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCurvedConnector5Path">
            <summary>
            This method is used to get the curved connector5 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetBentConnectorPath">
            <summary>
            Get Bent Connector path
            </summary>
            <formula>
            formulaColl.Add("x1","*/ w adj1 100000");
            </formula>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetBendConnector2Path">
            <summary>
            This method is used to get the bend connector 2 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetBentConnector4Path">
            <summary>
            This method is used to get the bend connector 4 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetBentConnector5Path">
            <summary>
            This method is used to get the bend connector 5 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRoundedRectanglePath">
             <summary>
            Gets Rounded Rectangle Path
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetSnipSingleCornerRectanglePath">
            <summary>
            Gets Snip Single Corner Rectangle Path
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetSnipSameSideCornerRectanglePath">
            <summary>
            Gets Snip Same Side Corner Rectangle Path
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetSnipDiagonalCornerRectanglePath">
            <summary>
            Gets Snip Diagonal Corner Rectangle Path
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetSnipAndRoundSingleCornerRectanglePath">
            <summary>
            Gets Snip And Round Single Corner Rectangle Path
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRoundSingleCornerRectanglePath">
            <summary>
            Gets Round Single Corner Rectangle Path
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRoundSameSideCornerRectanglePath">
            <summary>
            Gets Round Same Side Corner Rectangle Path
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRoundDiagonalCornerRectanglePath">
            <summary>
            Gets Round Diagonal Corner Rectangle Path
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetTrianglePath">
            <summary>
            Get Triangle path
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetParallelogramPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetTrapezoidPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRegularPentagonPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetHexagonPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetHeptagonPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetOctagonPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDecagonPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDodecagonPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetPiePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetChordPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetTearDropPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFramePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetHalfFramePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetL_ShapePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDiagonalStripePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCrossPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetPlaquePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCanPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCubePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetBevelPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDonutPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetNoSymbolPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetBlockArcPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFoldedCornerPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetSmileyFacePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetPictureSmileyFacePath">
            <summary>
            Gets Picture SmileyFace
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetHeartPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLightningBoltPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetSunPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetMoonPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCloudPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetArcPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDoubleBracketPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDoubleBracePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftBracketPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRightBracketPath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftBracePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRightBracePath">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRightArrowPath">
            <summary>
            Gets the right arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftArrowPath">
            <summary>
            Gets the left arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDownArrowPath">
            <summary>
            Gets down arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftRightArrowPath">
            <summary>
            Gets the left right arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCurvedRightArrowPath">
            <summary>
            Gets the curved right arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCurvedLeftArrowPath">
            <summary>
            Gets the curved left arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCurvedUpArrowPath">
            <summary>
            Gets the curved up arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCurvedDownArrowPath">
            <summary>
            Gets the curved down arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetUpDownArrowPath">
            <summary>
            Gets up down arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetQuadArrowPath">
            <summary>
            Gets the quad arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftRightUpArrowPath">
            <summary>
            Gets the left right up arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetBentArrowPath">
            <summary>
            Gets the bent arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetUTrunArrowPath">
            <summary>
            Gets the U trun arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftUpArrowPath">
            <summary>
            Gets the left up arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetBentUpArrowPath">
            <summary>
            Gets the bent up arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetStripedRightArrowPath">
            <summary>
            Gets the striped right arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetNotchedRightArrowPath">
            <summary>
            Gets the notched right arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetPentagonPath">
            <summary>
            Gets the pentagon path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetChevronPath">
            <summary>
            Gets the chevron path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRightArrowCalloutPath">
            <summary>
            Gets the right arrow callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDownArrowCalloutPath">
            <summary>
            Gets down arrow callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftArrowCalloutPath">
            <summary>
            Gets the left arrow callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetUpArrowCalloutPath">
            <summary>
            Gets up arrow callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftRightArrowCalloutPath">
            <summary>
            Gets the left right arrow callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetQuadArrowCalloutPath">
            <summary>
            Gets the quad arrow callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCircularArrowPath">
            <summary>
            Gets the circular arrow path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCircularArrowPathSmartArt">
            <summary>
            Gets the circular arrow path for SmartArt.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetMathPlusPath">
            <summary>
            Gets the math plus path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetMathMinusPath">
            <summary>
            Gets the math minus path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetMathMultiplyPath">
            <summary>
            Gets the math multiply path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetMathDivisionPath">
            <summary>
            Gets the math division path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetMathEqualPath">
            <summary>
            Gets the math equal path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetMathNotEqualPath">
            <summary>
            Gets the math not equal path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartAlternateProcessPath">
            <summary>
            Gets the flow chart alternate process path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartPredefinedProcessPath">
            <summary>
            Gets the flow chart predefined process path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartInternalStoragePath">
            <summary>
            Gets the flow chart internal storage path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartDocumentPath">
            <summary>
            Gets the flow chart document path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartMultiDocumentPath">
            <summary>
            Gets the flow chart multi document path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartTerminatorPath">
            <summary>
            Gets the flow chart terminator path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartPreparationPath">
            <summary>
            Gets the flow chart preparation path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartManualInputPath">
            <summary>
            Gets the flow chart manual input path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartManualOperationPath">
            <summary>
            Gets the flow chart manual operation path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartConnectorPath">
            <summary>
            Gets the flow chart connector path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartOffPageConnectorPath">
            <summary>
            Gets the flow chart off page connector path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartCardPath">
            <summary>
            Gets the flow chart card path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartPunchedTapePath">
            <summary>
            Gets the flow chart punched tape path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartSummingJunctionPath">
            <summary>
            Gets the flow chart summing junction path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartOrPath">
            <summary>
            Gets the flow chart or path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartCollatePath">
            <summary>
            Gets the flow chart collate path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartSortPath">
            <summary>
            Gets the flow chart sort path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartExtractPath">
            <summary>
            Gets the flow chart extract path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartMergePath">
            <summary>
            Gets the flow chart merge path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartOnlineStoragePath">
            <summary>
            Gets the flow chart online storage path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartDelayPath">
            <summary>
            Gets the flow chart delay path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartSequentialAccessStoragePath">
            <summary>
            Gets the flow chart sequential access storage path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartMagneticDiskPath">
            <summary>
            Gets the flow chart magnetic disk path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartDirectAccessStoragePath">
            <summary>
            Gets the flow chart direct access storage path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFlowChartDisplayPath">
            <summary>
            Gets the flow chart display path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRectangularCalloutPath">
            <summary>
            Gets the rectangular callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetRoundedRectangularCalloutPath">
            <summary>
            Gets the rounded rectangular callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetOvalCalloutPath">
            <summary>
            Gets the oval callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetCloudCalloutPath">
            <summary>
            Gets the cloud callout path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout1Path">
            <summary>
            Gets the line callout1 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout2Path">
            <summary>
            Gets the line callout2 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout3Path">
            <summary>
            Gets the line callout3 path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout1AccentBarPath">
            <summary>
            Gets the line callout1 accent bar path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout2AccentBarPath">
            <summary>
            Gets the line callout2 accent bar path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout3AccentBarPath">
            <summary>
            Gets the line callout3 accent bar path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout1NoBorderPath">
            <summary>
            Gets the line callout1 no border path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout2NoBorderPath">
            <summary>
            Gets the line callout2 no border path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout3NoBorderPath">
            <summary>
            Gets the line callout3 no border path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout1BorderAndAccentBarPath">
            <summary>
            Gets the line callout1 border and accent bar path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout2BorderAndAccentBarPath">
            <summary>
            Gets the line callout2 border and accent bar path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLineCallout3BorderAndAccentBarPath">
            <summary>
            Gets the line callout3 border and accent bar path.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetVMLCustomShapePath(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Path2D})">
            <summary>
            Gets the VML custom shape path path.
            </summary>
            <returns></returns>
        </member>
        <!-- Badly formed XML comment ignored for member "M:Syncfusion.DocIO.Rendering.ShapePath.GetCustomGeomentryPath(System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfPath,System.Collections.Generic.Dictionary{System.String,System.String},System.Collections.Generic.Dictionary{System.String,System.String},System.Collections.Generic.List{Syncfusion.DocIO.DLS.Path2D})" -->
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetGeomentryPath(Syncfusion.Pdf.Graphics.PdfPath,System.Collections.Generic.List{System.Double},System.Double,System.Double,System.Drawing.RectangleF)">
            <summary>
            Gets a geometry path of Path2D.
            </summary>
            <param name="path">Represent a GraphicPath.</param>
            <param name="pathElements">Represent a input path elements.</param>
            <param name="pathWidth">Represent a width of Path.</param>
            <param name="pathHeight">Represent a height of Path.</param>
            <param name="bounds">Represent a bounds of Path.</param>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFunnelPath">
            <summary>
            Gets the funnel path for the specified shape.
            </summary>
            <returns>The PDF path for the funnel shape.</returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetSwooshArrowPath">
            <summary>
            Gets the swoosh arrow path for the specified shape.
            </summary>
            <returns>The PDF path for the swoosh arrow shape.</returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftRightRibbonPath">
            <summary>
            Gets the left right ribbon path for the specified shape.
            </summary>
            <returns>The PDF path for the left right ribbon shape.</returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetLeftCircularArrowPath">
            <summary>
            Gets the left circular arrow path for the specified shape.
            </summary>
            <returns>The PDF path for the left circular arrow shape.</returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetGeomentryPathXValue(System.Double,System.Double,System.Drawing.RectangleF)">
            <summary>
            Gets a X value of Path.
            </summary>
            <param name="pathWidth">Represent a width of Path.</param>
            <param name="x">Represent a X value.</param>
            <param name="bounds">Represent a bounds of Path.</param>
            <returns>Returns a X value.</returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetGeomentryPathYValue(System.Double,System.Double,System.Drawing.RectangleF)">
            <summary>
            Gets a Y value of Path.
            </summary>
            <param name="pathHeight">Represent a height of Path.</param>
            <param name="y">Represent a Y value.</param>
            <param name="bounds">Represent a bounds of Path.</param>
            <returns>Returns a Y value.</returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.ConvertPathElement(System.String,System.Collections.Generic.List{System.Double},System.Collections.Generic.Dictionary{System.String,System.String},Syncfusion.DocIO.DLS.Path2D,System.Collections.Generic.Dictionary{System.String,System.Single})">
            <summary>
            Convert the path element of custom shape
            </summary>
            <param name="pathElement">Represent a path element to convert.</param>
            <param name="pathElements">Represent a converted path elements.</param>
            <param name="combinedValues">Represent a formula collection.</param>
            <param name="path">Represent a path object.</param>
            <param name="calculatedValues">Represent formula with its values.</param>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetGraphicsPath">
            <summary>
            Gets a new GraphicsPath object.
            </summary>
            <returns>Returns a new GraphicsPath object.</returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDegreeValue(System.Single)">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetXYPosition(System.Single,System.Single,System.Single)">
             <summary>
            
             </summary>
             <param name="xDifference"></param>
             <param name="yDifference"></param>
             <param name="positionRatio"></param>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetPathAdjustValue(Syncfusion.DocIO.DLS.AutoShapeType)">
            <summary>
            Get Path adjust value
            </summary>
            <param name="shapeType"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.ParseShapeFormula(Syncfusion.DocIO.DLS.AutoShapeType)">
            <summary>
            Parse Shape Formula
            </summary>
            <param name="shapeType"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetFormulaValues(Syncfusion.DocIO.DLS.AutoShapeType,System.Collections.Generic.Dictionary{System.String,System.String},System.Boolean,System.String)">
            <summary>
            Gets Formula Values
            </summary>
            <param name="shapeType"></param>
            <param name="formulaColl"></param>
            <param name="isAdjValue"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetOperandValues(Syncfusion.DocIO.DLS.AutoShapeType,System.Collections.Generic.Dictionary{System.String,System.Single}@,System.String[],System.Boolean,System.String)">
            <summary>
            Gets Operand Values
            </summary>
            <param name="shapeType"></param>
            <param name="formulaValues"></param>
            <param name="splitFormula"></param>
            <param name="isAdjValue"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetPresetOperandValue(System.String)">
             <summary>
            
             </summary>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetResultValue(System.String,System.Single[])">
             <summary>
            
             </summary>
             <param name="formula"></param>
             <param name="operandValues"></param>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetShapeFormula(Syncfusion.DocIO.DLS.AutoShapeType)">
             <summary>
            
             </summary>
             <param name="shapeType"></param>
             <returns></returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetSmartArtShapeFormula(System.String)">
            <summary>
            Retrieves the formula dictionary for a specified SmartArt shape.
            </summary>
            <param name="shape">The name of the shape</param>
            <returns>A dictionary containing the formulas for the specified shape.</returns>
        </member>
        <member name="M:Syncfusion.DocIO.Rendering.ShapePath.GetDefaultPathAdjValues(Syncfusion.DocIO.DLS.AutoShapeType,System.String)">
            <summary>
            Gets the default path adjustment values for a given shape type and shape name.
            </summary>
            <param name="shapeType">The type of the shape</param>
            <param name="shape">The name of the shape for which path adjustments are being calculated.</param>
            <returns>A dictionary containing the default path adjustment values for the shape.</returns>
        </member>
        <member name="T:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext">
            <summary>
            Represents the class which acts as an drawing context.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DEF_SCRIPT_FACTOR">
            <summary>
            The default script factor for sub/super script.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DEF_DINOFFC_TEXT_FACTOR">
            <summary>
            The default factor values to fit the DinOffc font text into the corresponding font grid.
            /// </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DEF_FONT_SIZE">
            <summary>
            The default font size.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DEF_PICBULLET_MIN_FONT_SIZE">
            <summary>
            The default minimum font size for picture bullet.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DEF_PICBULLET_SCALE_FACTOR">
            <summary>
            The default scale factor for picture bullet.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.c_regexOptions">
            <summary>
            Default RegEx checks object's options.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.c_isSpaceOrTab">
            <summary>
            Pattern for isSpaceOrTab.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.s_isSpaceOrTab">
            <summary>
            Whitespace regex.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_applyMatteToTransparentImages">
            <summary>
            Indicates whether a matte color should be applied to transparent images during Word to PDF conversion.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_pdfgraphics">
            <summary>
            Drawing Graphics.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_imageQuality">
            <summary>
            Image Quality.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_preserveFormFields">
            <summary>
            PreserveFormFields.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.pdfFontCollection">
            <summary>
            PdfFont collection
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_substitutedFonts">
            <summary>
            This collection contains the Pdf fonts which are created by SubstitutedFont event streams.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_graphics">
            <summary>
            Drawing Graphics.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_hyperLinks">
            <summary>
            Holds the list of hyperlinks and its corrsponding bounds.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_commentId">
            <summary>
            Used to skip a text highlighter between the comment ranges.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.autoTagCount">
            <summary>
            Auto tag index
             </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.currParagraphIndex">
             <summary>
            Skips the bookmark add for all the textrange of paragraph.
             </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.underLineValues">
            <summary>
            We have hold the underline style properties and bounds to draw a line.
            using this dictionary, we have draw the line after the text drawn.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.strikeThroughValues">
            <summary>
            We have hold the Strike-Through properties and bounds to draw a line.
            using this dictionary, we have draw the line after the text drawn.
            </summary>
        </member>
        <member name="F:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.m_isRenderingBalloon">
            <summary>
            Sets true if the balloon is getting rendered.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsListCharacter">
            <summary>
            
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.RecreateNestedMetafile">
            <summary>
            Gets or sets a value that indicates whether to regenerate the nested EMF images present in the Word document during PDF conversion. Default value is<b>false</b>.
            </summary>
            <value><b>True</b> if it is necessary to regenerate the nested EMF images present in the Word document during PDF conversion; otherwise <b>false</b>.</value>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ClearFontCache">
            <summary>
            Clear the font cache.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.PdfDocument">
            <summary>
            Gets or sets the PdfDocument.
            </summary>
            <value>The PdfDocument.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CurrentBookmarkName">
            <summary>
            Get the Current Bookmark name
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ExportBookmarks">
            <summary>
            Gets or sets the value indicates whether to export Word document heading as PDF bookmarks.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.EnableComplexScript">
            <summary>
            Decides whether, we should enable PdfMetafile.ComplexScript property for current page.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ApplyMatteToTransparentImages">
            <summary>
             Gets or sets a value that indicates whether a matte color should be applied to transparent images during Word to PDF conversion.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.PDFGraphics">
            <summary>
            Gets or sets the graphics.
            </summary>
            <value>The graphics.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ImageQuality">
            <summary>
            Gets or sets the ImageQuality.
            </summary>
            <value>image quality</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.PreserveFormFields">
            <summary>
            Gets or sets the PreserveFormFields.
            </summary>
            <value>PreserveFormFields</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.PrivateFonts">
            <summary>
            Gets or sets the custom font collection.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FontNames">
            <summary>
            Gets or sets the custom font name collection.
            </summary>
            <value>fontName</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FallbackFonts">
            <summary>
            Gets a Fallback font collection of Word document.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FontStreams">
            <summary>
            Gets or set the embedded fonts.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Graphics">
            <summary>
            Gets or sets the graphics.
            </summary>
            <value>The graphics.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GraphicsBmp">
            <summary>
            Gets the bitmap graphics.
            </summary>
            <value> The graphics.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Hyperlinks">
            <summary>
            Gets the hyperlinks.
            </summary>
            <value>The hyperlinks.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.BookmarkHyperlinksList">
            <summary>
            Gets the bookmark hyperlinks list.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.SmartArtBookmarkHyperlinksList">
            <summary>
            Gets the SmartArt bookmark hyperlinks list.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Bookmarks">
            <summary>
            Gets the bookmarks.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.OverLappedShapeWidgets">
            <summary>
            Gets the overlapping shape widgets.
            </summary>
            <value>The overlapping shape widgets.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FontMetric">
            <summary>
            Gets the font metric.
            </summary>
            <value>
            The font metric.
            </value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.StringFormt">
            <summary>
            Gets the string formt.
            </summary>
            <value>
            The string formt.
            </value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.EmbedFonts">
            <summary>
            Gets or sets a value indicating whether to embed fonts to converted PDF in Word to PDF conversion.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.PreserveOleEquationAsBitmap">
            <summary>
            Gets or sets a value indicating whether to preserve the ole equation as bitmap in Word to PDF conversion.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.EmbedCompleteFonts">
            <summary>
            Gets or sets a value indicating whether to embed the complete font information in the resultant PDF document.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AutoTag">
             <summary>
            Gets or sets a value indicates whether the converted PDF document is tagged or not.
             </summary>
             Remarks: Set this property as true, to preserve the accessible structure tags from Word document to the converted PDF. Using this property Word documents can be converted to PDF with 508 compliance.
             Setting this property as true will automatically enable EnableFastRendering property.
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsRenderingBalloon">
            <summary>
            Checks whether the balloon is getting rendered.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.#ctor">
            <summary>
            Initializes a new instance of the PDFDrawingContext class.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.#ctor(System.Boolean)">
            <summary>
            Initializes a new instance of the <see cref="T:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext"/> class.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.#ctor(Syncfusion.Pdf.Graphics.PdfGraphics,System.Drawing.Graphics,System.Drawing.GraphicsUnit,Syncfusion.Pdf.PdfDocument)">
            <summary>
            Initializes a new instance of the PDFDrawingContext class.
            </summary>
            <param name="pdfgraphics">The graphics.</param>
            <param name="graphics">The page unit.</param>
            <param name="pageUnit">The page unit.</param>
            <param name="pdfDocument">The page unit.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsContainsPDFFont(System.Drawing.Font,System.Boolean,Syncfusion.Pdf.Graphics.PdfTrueTypeFont@,System.String)">
            <summary>
            Gets the PDF true type font and return true if its successfully gets the pdf font from the collection.
            </summary>
            <param name="font">The base <see cref="T:System.Drawing.Font"/> instance representing the font style and size</param>
            <param name="isUnicode">Indicates whether the text contains Unicode characters</param>
            <param name="matchedFont">Neeed to returns the value from PDF true type font</param>
            <param name="fontKey">Gets the font name from the font frim fall back font key</param>
            <returns>Returns true if matched font gets value from PDF font</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPDFFont(System.String,System.Drawing.Font,Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.Pdf.Graphics.PdfStringFormat,Syncfusion.Office.FontScriptType,System.String,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Retrieves or creates the PdfFont.
            </summary>
            <param name="text">The text content to be rendered.</param>
            <param name="tempfont">The base <see cref="T:System.Drawing.Font"/> instance representing the font style and size.</param>
            <param name="charFormat">The <see cref="T:Syncfusion.DocIO.DLS.WCharacterFormat"/> containing character formatting details.</param>
            <param name="pdfStringFormat">The <see cref="T:Syncfusion.Pdf.Graphics.PdfStringFormat"/> used for PDF text rendering.</param>
            <param name="scriptType">The <see cref="T:Syncfusion.Office.FontScriptType"/> indicating the script type (e.g., English, Chinese, Arabic).</param>
            <param name="fontName">The name of the font family.</param>
            <param name="isEmbeddingFonts">Indicates whether fonts should be embedded in the PDF.</param>
            <param name="isUnicodeText">Indicates whether the text contains Unicode characters.</param>
            <param name="isNeedToCheckRegularStyleFontToRender">
            Specifies whether to check and use the regular style version of the font for rendering,  
            if the style-specific font lacks required Unicode glyphs.
            </param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawOverLappedShapeWidgets(System.Boolean)">
            <summary>
            Draws the Overlapping shape widgets.
            Currently handled only for Docx format documents
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreatePdfFont(System.Drawing.Font,System.Boolean,System.Boolean,System.String)">
            <summary>
            Create pdf font and maintain it in the collection, To improve the performance
            </summary>
            <param name="tempfont"></param>
            <param name="embedFont"></param>
            <param name="EmbedCompleteFonts"></param>
            <param name="text"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsColorMismatched(Syncfusion.DocIO.DLS.IEntity,Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Paragraph has a color which is mismatched from the next sibling paragraph color 
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateAutoTag(Syncfusion.Pdf.PdfTagType,System.String,System.String,System.Boolean)">
            <summary>
            Create Auto tag.
            </summary>
            <param name="tagType"></param>
            <param name="alternateText"></param>
            <param name="title"></param>
            <param name="isOverlapedShape"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreatePdfStructureElement(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Creates Pdf structure element for headings and paragraph.
            </summary>
            <param name="paragraph">The paragraph.</param>
            <param name="layoutedWidget">The layouted widge.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetHeadingLevelPdfTagType(System.Int32)">
            <summary>
            Gets the Pdf tag type enum value for heading style.
            </summary>
            <param name="outlineLevel">The outline level of the heading style.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreatePdfStructureElement(Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.Entity,Syncfusion.DocIO.DLS.WTableCell,System.Boolean)">
            <summary>
            Creates Pdf structure element for table, table row and table data.
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <param name="ownerWidget">The owner widget.</param>
            <param name="cellWidget">The cell widget.</param>
            <param name="isOverlappedShape">is OverlappedShape</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawParagraph(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the paragraph.
            </summary>
            <param name="paragraph">The paragraph.</param>
            <param name="ltWidget">The lt widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPdfHatchStyle(Syncfusion.DocIO.DLS.PatternType)">
            <summary>
            Retrieves the corresponding PDF hatch style for a given pattern type from a document.
            </summary>
            <param name="pattern">An instance of <see cref="T:Syncfusion.DocIO.DLS.PatternType"/> representing the pattern style from the document.</param>
            <returns>Returns a <see cref="T:Syncfusion.Pdf.Graphics.PdfHatchStyle"/> corresponding to the specified pattern type.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ConvertPatternTypeToHatchStyle(Syncfusion.DocIO.DLS.PatternType)">
            <summary>
            Converts a given PatternType to a corresponding HatchStyle.
            </summary>
            <param name="type">The PatternType to be converted.</param>
            <returns>The corresponding HatchStyle for the provided PatternType.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTextBox(Syncfusion.DocIO.DLS.WTextBox,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the text box.
            </summary>
            <param name="textBox">The text box.</param>
            <param name="ltWidget">The lt widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateClipBounds(System.Drawing.RectangleF)">
            <summary>
            We have handle for rotated childshapes.
            </summary>
            <param name="clipBounds">clipbounds value</param>
            <returns>return the clipbounds value</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawBarTabStop(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw Bar Tab Stop of the paragraph
            </summary>
            <param name="paragraph"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBoundsToDrawParagraphBackGroundColor(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget,System.Boolean,System.Boolean,System.Boolean@)">
            <summary>
            Get bounds to draw a paragraph back ground color and texture styles
            </summary>
            <param name="paragraph"></param>
            <param name="ltWidget"></param>
            <param name="isParagraphMarkIsHidden"></param>
            <param name="isLineDrawing"></param>
            <param name="resetTransform"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsParagraphContainingListHasBreak(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Check whether Paragraph Containing list has break.
            </summary>
            <param name="ltWidget">ltWidget</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBaseEntity(Syncfusion.DocIO.DLS.Entity)">
            <summary>
            Get the base entity
            </summary>
            <param name="entity"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTextTopPosition(System.String,System.Drawing.Font,System.Drawing.SizeF)">
            <summary>
            Get the text top position  
            </summary>
            <param name="text">Represent the text</param>
            <param name="font">Represent the font</param>
            <param name="size">Represent the  size</param>
            <returns>Return the Text drawing y position</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsNeedtoUpdateTabPosition(Syncfusion.Layouting.LayoutedWidget,System.Int32)">
            <summary>
            Decides whether, we should update the tab position or not.
            </summary>
            <param name="widget">The widget.</param>
            <param name="index">Index of the entity.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateTabPosition(Syncfusion.Layouting.LayoutedWidget,System.Drawing.RectangleF)">
            <summary>
            Updates the tab position.
            </summary>
            <param name="widget">The widget.</param>
            <param name="clientArea">The client area.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateDecimalTabPosition(Syncfusion.Layouting.LayoutedWidget,System.Drawing.RectangleF)">
            <summary>
            Updates the decimal tab position.
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <param name="clientArea">The client area.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateDecimalTabPositionInCell(Syncfusion.Layouting.LayoutedWidget,System.Drawing.RectangleF)">
            <summary>
            Updates the decimal tab position in cell.
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <param name="clientArea">The client area.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsNeedToShiftBasedOnDecimalTab(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.DocIO.DLS.Tab@)">
            <summary>
            Check whether we need to shift the position based on decimal tab.
            </summary>
            <param name="ownerParagraph"></param>
            <param name="decimalTab"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsDecimalTabStart(Syncfusion.Layouting.LayoutedWidget,System.Int32,System.Boolean,System.Int32,System.Single,System.Boolean)">
            <summary>
            Determine whether is Decimal Tab Start
            </summary>
            <param name="ltWidget"></param>
            <param name="decimalTabStart"></param>
            <param name="isDecimalTab"></param>
            <param name="i"></param>
            <param name="widthToShift"></param>
            <param name="isInCell"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetWidthToShift(Syncfusion.Layouting.LayoutedWidget,System.Int32,System.Boolean,System.Drawing.RectangleF,Syncfusion.DocIO.DLS.Tab)">
            <summary>
            Get Width To Shift the xposition of childwidget
            </summary>
            <param name="ltWidget"></param>
            <param name="decimalTabStart"></param>
            <param name="isInCell"></param>
            <param name="clientArea"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsInShapeOrTextBox(Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Determine whether the paragraph is in shape or textbox.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetCurrentTabFormat(Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Get the paragraph format for current tab
            </summary>
            <param name="paragraph">The Paragraph</param>
            <returns>Paragrph format</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetColumnWidth(Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Get Column Width
            </summary>
            <param name="paragraph">The Paragraph</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLeftWidth(Syncfusion.DocIO.DLS.WParagraph,System.Int32,System.Int32)">
            <summary>
            Get Left width of the Decimal seperator
            </summary>
            <param name="paragraph"></param>
            <param name="decimalTabStart"></param>
            <param name="decimalTabEnd"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLeftWidth(Syncfusion.Layouting.LayoutedWidget,System.Int32,System.Int32)">
            <summary>
            Get Left width of the Decimal seperator
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <param name="decimalTabStart">The decimal tab start.</param>
            <param name="decimalTabEnd">The decimal tab end.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetIndexOfDecimalseparator(Syncfusion.DocIO.DLS.WParagraph,System.Int32,System.Int32,System.Single@,System.Int32@,System.Boolean@)">
            <summary>
            Get Index of Decimal Separator
            Index denotes the TextRange which have a decimal separator
            </summary>
            <param name="paragraph"></param>
            <param name="decimalTabStart"></param>
            <param name="decimalTabEnd"></param>
            <param name="leftWidth"></param>
            <param name="decimalSeparator"></param>
            <param name="isSeparator"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetIndexOfDecimalseparator(Syncfusion.Layouting.LayoutedWidget,System.Int32,System.Int32,System.Single@,System.Int32@,System.Boolean@)">
            <summary>
            Get Index of Decimal Separator
            Index denotes the TextRange which have a decimal separator
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <param name="decimalTabStart">The decimal tab start.</param>
            <param name="decimalTabEnd">The decimal tab end.</param>
            <param name="leftWidth">Width of the left.</param>
            <param name="decimalSeparator">The decimal separator.</param>
            <param name="isSeparator">if set to <c>true</c> [is separator].</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsDecimalSeparator(System.Char[],System.Int32@,System.Boolean)">
            <summary>
            Determine whether is Decimal Separator
            </summary>
            <param name="ch"></param>
            <param name="decimalSeparator"></param>
            <param name="isPrevTextHasNumber"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetOwnerParagraph(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Get Owner paragraph of the LayoutedWidget
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTabEndIndex(Syncfusion.Layouting.LayoutedWidget,System.Int32)">
            <summary>
            Gets the tab end index.
            Index denotes the item, previous of next subsequent tab.
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <param name="startIndex">The start index.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLastInlineItemIndex(Syncfusion.Layouting.LayoutedWidget,System.Int32)">
            <summary>
            Returns the index of the last inline item in the layouted widget.
            </summary>
            <param name="ltWidget">The layouted widget</param>
            <param name="startIndex">The start index</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetListValue(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.ParagraphLayoutInfo,Syncfusion.DocIO.DLS.WListFormat)">
            <summary>
            Get the current list size.
            </summary>
            <param name="paragraph"></param>
            <param name="paragraphInfo"></param>
            <param name="listFormat"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawList(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.WListFormat)">
            <summary>
            Draws the list.
            </summary>
            <param name="paragraph">Paragraph</param>
            <param name="ltWidget">Layouted Widget</param>
            <param name="listFormat">List Format</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawListTabLeader(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.ParagraphLayoutInfo,System.Single,System.Single,System.Single)">
            <summary> 
            Draws the list tab leader.
            </summary>
            <param name="paragraph">The paragraph.</param>
            <param name="paragraphInfo">The paragraph info.</param>
            <param name="listWidth">Width of the list.</param>
            <param name="xPosition">The x position.</param>
            <param name="yPosition">The y position.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTabLeader(Syncfusion.Layouting.ParagraphLayoutInfo)">
            <summary>
            Gets the tab leader.
            </summary>
            <param name="paragraphInfo">The paragraph info.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetAscentValueForEQField(Syncfusion.DocIO.DLS.WField)">
            <summary>
            Gets the ascet value for Equation field.
            </summary>
            <param name="field">Equation field</param>       
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsLineContainsEQfield(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Check whether the current lines contains the equation field and it
            contains the height of the corresponding line.
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>                      
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsEmptyParagraph(Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Determines whether the paragraph is empty
            </summary>
            <param name="para">paragraph</param>
            <returns> returns true if paragraph is empty </returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddCommentMark(Syncfusion.DocIO.DLS.WCommentMark,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Calculate a line points for the WCommentMark.
            </summary>
            <param name="commentMark"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCommentMarks(Syncfusion.DocIO.DLS.RevisionOptions)">
            <summary>
            Draw the WCommentMark.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawAbsoluteTab(Syncfusion.DocIO.DLS.WAbsoluteTab,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw AbsoluteTab
            </summary>
            <param name="absoluteTab"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateAbsoluteTabLeader(Syncfusion.DocIO.DLS.WAbsoluteTab,Syncfusion.Layouting.LayoutedWidget,System.String@)">
            <summary>
            Update AbsoluteTab leader
            </summary>
            <param name="absoluteTab"></param>
            <param name="ltWidget"></param>
            <param name="text"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawSeparator(Syncfusion.DocIO.DLS.WTextRange,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the Footnote separator
            </summary>
            <param name="txtRange">The TXT range.</param>
            <param name="ltWidget">The lt widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawEditableTextRange(Syncfusion.DocIO.DLS.WTextRange,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the Editable text range.
            </summary>
            <param name="txtRange">The TXT range.</param>
            <param name="ltWidget">The lt widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.InverseCharacter(System.Char)">
            <summary>
            Inverse the specified character with suitable bidi character
            </summary>
            <param name="ch">Specify the input character</param>
            <returns>Return the inversed character</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsInversedCharacter(System.String)">
            <summary>
            Determines whether the characters are inverses in the input text.
            </summary>
            <param name="text">Specify the input text</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTextRange(Syncfusion.DocIO.DLS.WTextRange,Syncfusion.Layouting.LayoutedWidget,System.String)">
            <summary>
            Draws the text range.
            </summary>
            <param name="txtRange">The TXT range.</param>
            <param name="ltWidget">The lt widget.</param>
            <param name="text">The text.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTrimmedText(System.String,Syncfusion.DocIO.DLS.WTextRange)">
            <summary>
            Trim the space characters in the text.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsValidFieldResult(Syncfusion.DocIO.DLS.WField,Syncfusion.Layouting.IWidget)">
            <summary>
            Check whether the widget is in field result or not.
            </summary>
            <param name="hyperLinkField">Hyper link field</param>
            <param name="widget">Widget.</param>
            <returns>If the widget is in field result, return True;else false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateBookmarkTargetPosition(Syncfusion.DocIO.DLS.Entity,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Update Target position to the bookmark hyperlink
            </summary>
            <param name="ent"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPreviousRenderableEntity(Syncfusion.DocIO.DLS.Entity)">
            <summary>
            Gets the previous renderable entity.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateBookmarkRerefeceLink(Syncfusion.DocIO.DLS.Entity,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Create Bookmark reference link
            </summary>
            <param name="ent"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTextRangeFollowWithTab(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Determine whether the tab stop is preserved after the text range in the current line
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateTabLeader(Syncfusion.DocIO.DLS.WTextRange,Syncfusion.Layouting.LayoutedWidget,System.String@)">
            <summary>
            Update Tab Width.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FillDots(System.Drawing.Font,Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.StringFormat,System.String@)">
            <summary>
            Fill with dots for tab leader
            </summary>
            <param name="font">Font</param>
            <param name="ltWidget">Current layouted widget</param>
            <param name="charFormat">Character format of layouted widget</param>
            <param name="format">String format</param>
            <param name="text">text</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FillSingle(System.Drawing.Font,Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.StringFormat,System.String@)">
            <summary>
            Fill with sigle for tab leader
            </summary>
            <param name="font">Font</param>
            <param name="ltWidget">Current layouted widget</param>
            <param name="charFormat">Character format of layouted widget</param>
            <param name="format">String format</param>
            <param name="text">text</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FillHyphens(System.Drawing.Font,Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.StringFormat,System.String@)">
            <summary>
            Fill with hyphens for tab leader
            </summary>
            <param name="font">Font</param>
            <param name="ltWidget">Current layouted widget</param>
            <param name="charFormat">Character format of layouted widget</param>
            <param name="format">String format</param>
            <param name="text">text</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FillSpace(System.Drawing.Font,Syncfusion.Layouting.LayoutedWidget,System.Drawing.StringFormat,System.String@)">
            <summary>
            Fills with space
            </summary>
            <param name="font"></param>
            <param name="ltWidget"></param>
            <param name="format"></param>
            <param name="text"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawSymbol(Syncfusion.DocIO.DLS.WSymbol,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the Symbol
            </summary>
            <param name="symbol"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsUnicodeFont(System.String)">
            <summary>
            Check whether the font is unicode font or not.
            </summary>
            <param name="fontName">Represent the font to check.</param>
            <returns>Returns true, if the font is unicode font; Otherwise false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawPicture(Syncfusion.DocIO.DLS.WPicture,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the image.
            </summary>
            <param name="picture">The image.</param>
            <param name="ltwidget">The bounds.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawPictureAsShape(System.Drawing.Image,Syncfusion.Pdf.Graphics.PdfPath,System.Drawing.RectangleF,System.Single,System.Single)">
            <summary>
            Draw AutoShape picture fill 
            </summary>
            <param name="image">Image</param>
            <param name="path">AutoShapes path</param>
            <param name="bounds">Layouted widget bounds</param>
            <param name="owner">Owner entity</param>
            <param name="transparency">Picture transparency</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ApplyPictureRecolor(System.Drawing.Image,Syncfusion.DocIO.DLS.BlipFormat,System.Boolean)">
            <summary>
            Applies color transformations to the specified image based on the provided <see cref="T:Syncfusion.DocIO.DLS.BlipFormat"/> settings,
            including grayscale, black-and-white, and duotone effects.
            </summary>
            <param name="image">The original image to which the color transformations will be applied.</param>
            <param name="blipFormat">The BlipFormat instance containing the color and effect transformation settings.</param>
            <param name="isPictureShape">Indicates whether the image is a picture shape. Default is <c>false</c>.</param>
            <returns>A new Image instance with the applied color transformations.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Apply2007PictureRecolor(System.Drawing.Image,Syncfusion.DocIO.DLS.Background)">
            <summary>
            Applies color transformations to an image in lower compatibility textbox based on the specified blip format settings.
            This includes grayscale, black-and-white effects.
            </summary>
            <param name="image">The original image to be recolored.</param>
            <param name="fillEffects">The fillEffects object containing the color and effect transformations to apply.</param>
            <returns>The transformed image with the applied effects.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateColorMatrix(System.Single,System.Single,System.Single)">
            <summary>
            Creates color matrix.
            </summary>
            <param name="b">brightness</param>
            <param name="c">contrast</param>
            <param name="s">saturation</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTableInTextBoxOrShape(Syncfusion.DocIO.DLS.Entity,System.Boolean)">
            <summary>
            Decides whether table is preserved inside text box or not.
            </summary>
            <param name="entity">Table cell</param>
            <param name="checkTextBoxOnly">Indicates whether to check textbox only.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBoundingBoxCoordinates(System.Drawing.RectangleF,System.Single)">
            <summary>
            Gets the bounding box of the rectangular bounds after rotation.
            </summary>
            <param name="bounds">Bounds</param>
            <param name="angle">Degree of rotation</param>
            <returns>Bounding box of the rectangular bounds</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CalculateBoundingBox(System.Drawing.PointF[])">
            <summary>
            Calculates the minX, minY, maxX and maxY of the rotated bounds.
            </summary>
            <param name="imageCoordinates"></param>
            <returns>Bounding box of a rectangular bounds</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTransformMatrix(System.Drawing.RectangleF,System.Single)">
            <summary>
            Gets the rotation transformation matrix
            </summary>
            <param name="bounds">Bounds of the picture</param>
            <param name="angle">Rotation angle</param>
            <returns>Transformation matrix</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetMatrixValuesFromSkia(System.Drawing.Drawing2D.Matrix)">
            <summary>
            Get matrix values of skia's matrix.
            </summary>
            <param name="matrix">SKia's matrix to get values from.</param>
            <returns>Image matrix.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPdfImage(System.Drawing.Image)">
            <summary>
            Gets the PdfImage with image quality from image
            </summary>
            <param name="image">Image</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.HasTransparentBackgroundAndWhitePixels(System.Drawing.Image)">
            <summary>
            Determines whether the given image contains both a transparent background and white pixels.
            </summary>
            <param name="image">The source image to analyze.</param>
            <returns>
            True if the image has transparency (alpha channel) and contains white pixels; otherwise, false.
            </returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.HasAlphaChannel(System.Drawing.Imaging.PixelFormat)">
            <summary>
            Determines whether the specified PixelFormat supports an alpha channel (transparency).
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPdfImage(System.IO.MemoryStream)">
            <summary>
            Gets the PdfImage with image quality from stream
            </summary>
            <param name="stream">Memory stream</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ConvertOleEquationAsBitmap(Syncfusion.DocIO.DLS.WPicture,System.Drawing.Image)">
            <summary>
            Converts the ole object into bitmap when the image and object is of WMF and equation type respectively.
            </summary>
            <param name="picture"></param>
            <param name="image"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawInlinePictureShape(Syncfusion.DocIO.DLS.WPicture,System.Drawing.RectangleF,System.Drawing.SizeF,System.Drawing.Image)">
            <summary>
            Draw the InlineShapePicture
            </summary>
            <param name="picture"></param>
            <param name="bounds"></param>
            <param name="size"></param>
            <param name="image"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreatePen(Syncfusion.DocIO.DLS.InlineShapeObject)">
            <summary>
            Create the Pen to draw the picture border
            </summary>
            <param name="inlineShapeObject"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetColorBorder(Syncfusion.DocIO.DLS.InlineShapeObject)">
            <summary>
            Get the color for the picture border
            </summary>
            <param name="inlineShapeObject"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLineCap(Syncfusion.Pdf.Graphics.PdfLineCap)">
            <summary>
            Get the line cap for picture border
            </summary>
            <param name="lineCap"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLineJoin(Syncfusion.Pdf.Graphics.PdfLineJoin)">
            <summary>
            Get LineJoin for picture border
            </summary>
            <param name="lineJoin"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPictureBorderPen(Syncfusion.DocIO.DLS.InlineShapeObject,Syncfusion.DocIO.ReaderWriter.Biff_Records.BorderCode,Syncfusion.Pdf.Graphics.PdfPen)">
            <summary>
            Get the Dash and line style for the picture shape
            </summary>
            <param name="inlineShape"></param>
            <param name="borderCode"></param>
            <param name="pen"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetDashAndLineStyle(Syncfusion.DocIO.DLS.InlineShapeObject,Syncfusion.Pdf.Graphics.PdfPen)">
            <summary>
            Get the dash and line style for picture border
            </summary>
            <param name="inlineShape"></param>
            <param name="pen"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetDashStyle(Syncfusion.DocIO.LineDashing,Syncfusion.Pdf.Graphics.PdfPen)">
            <summary>
            Get the Dash style for the border
            </summary>
            <param name="lineDashing"></param>
            <param name="pen"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CropImageBounds(Syncfusion.DocIO.DLS.WPicture,System.Drawing.RectangleF@,System.Drawing.SizeF@)">
            <summary>
            Set the CropImageBounds if the image offset is negative
            </summary>
            <param name="picture"></param>
            <param name="bounds"></param>
            <param name="size"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CropPosition(Syncfusion.DocIO.DLS.WPicture)">
            <summary>
            Gets the position to crop the image
            </summary>
            <param name="picture"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawEquationField(Syncfusion.Office.FontScriptType,Syncfusion.Layouting.LayoutedEQFields,Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Draws the equation field swtiches. 
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawArraySwitch(Syncfusion.Office.FontScriptType,Syncfusion.Layouting.LayoutedEQFields,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.StringAlignment)">
            <summary>
            Draws an Array EQ switch using their properties.
            </summary>
            <param name="scriptType">Represents a script type</param>
            <param name="ltEQField">A layouted array EQ switch.</param>
            <param name="charFormat">Represents a charFormat for array switch.</param>
            <param name="arraySwitchAlignment">Represents a <see cref="T:System.Drawing.StringAlignment"/> for array EQ switch.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawRadicalSwitch(Syncfusion.Office.FontScriptType,Syncfusion.Layouting.LayoutedEQFields,Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Draws a radical switch and the radical symbol as a graphic path.
            </summary>
            <param name="scriptType">Represents a script type.</param>
            <param name="ltEQField">A layouted radical EQ switch.</param>
            <param name="charFormat">Represents a charFormat for radical switch elements.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawEditableDropDown(Syncfusion.DocIO.DLS.WDropDownFormField,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the Editable DrawDropDownFormField.
            </summary>
            <param name="dropDownFormField">dropDownFormField</param>
            <param name="ltWidget">The ltWidget.</param>  
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AlignEqFieldSwitches(Syncfusion.Layouting.LayoutedEQFields,System.Single,System.Single)">
            <summary>
            Align the layouted equation field switch based on the current y position.
            </summary>
            <param name="ltEQField">Layouted EQ field switches</param>
            <param name="xPosition">x position of layouted equation field switch</param>
            <param name="yPosition">Y position of layouted equation field switch</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ShiftEqFieldXYPosition(Syncfusion.Layouting.LayoutedEQFields,System.Single,System.Single)">
            <summary>
            Shift the eqaution field's x, y position based on the given x,y value.
            </summary>
            <param name="ltEQField">Layouted EQ field switches</param>
            <param name="xPosition">x position of layouted equation field switch</param>
            <param name="yPosition">Y position of layouted equation field switch</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GenerateErrorFieldCode(Syncfusion.Layouting.LayoutedEQFields,System.Single,System.Single,Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Generates the error text for the equation field.
            </summary>
            <param name="ltEQFiled">Represents a equation field to generate.</param>
            <param name="charFormat">Represents a <see cref="T:Syncfusion.DocIO.DLS.WCharacterFormat"/> which set for equation field.</param>
            <param name="xPosition">Represents a X position of equation field.</param>
            <param name="yPosition">Represents a Y position of equation field.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ShiftEqFieldYPosition(Syncfusion.Layouting.LayoutedEQFields,System.Single)">
            <summary>
             Shift the equation field's y position based on the given y value.
            </summary>
            <param name="LayoutedEQFields">Layouted EQ field switches</param>
            <param name="yPosition">Y position of layouted equation field switch</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTopMostY(Syncfusion.Layouting.LayoutedEQFields,System.Single)">
            <summary>
            Gets the top most Y position of layouted EQ fields.
            </summary>
            <param name="ltEQField">Layouted EQ field</param>
            <param name="minY">Minimum value of y position</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawString(Syncfusion.Office.FontScriptType,System.String,Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.DocIO.DLS.WParagraphFormat,System.Drawing.RectangleF,System.Single,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the string.
            </summary>
            <param name="scriptType">Represents a script type.</param>
            <param name="text">The text.</param>
            <param name="charFormat">The char format.</param>
            <param name="paraFormat">The para format.</param>
            <param name="bounds">The bounds.</param>
            <param name="clipWidth">The clipwidth.</param>
            <param name="ltWidget">The layouted widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTextNeedToRender(System.String,System.Single)">
            <summary>
            Checks whether we need to render the text.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBackgroundColorBounds(Syncfusion.Layouting.LayoutedWidget,System.Single,System.Single,System.Single,System.Single)">
            <summary>
            Gets the background color bounds.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Rotate(System.Single,System.Boolean@,System.Boolean@,Syncfusion.DocIO.DLS.TextWrappingStyle,System.Boolean,System.Boolean,System.Boolean@,System.Single@)">
            <summary>
            Rotate a Graphics based on Shape Rotation.
            </summary>
            <param name="ang">Specified the rotation angle.</param>
            <param name="flipH">Specifies whether text needs to vertically flip.</param>
            <param name="flipV">Specifies whether text needs to horizontally flip.</param>
            <param name="doNotRotateText">Specifies whether the text need to rotate.</param>
            <param name="textWrappingStyle">Specifies the text wrapping style.</param>
            <param name="isNeedToScale">Indicates whether the text need to scale or not.</param>
            <param name="isRotateTransformApplied">Indicates whether the line rotate transform is applied or not.</param>
            <param name="rotationAngle">Specifies the modified rotation angle.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CheckPreOrNextSiblingIsTab(Syncfusion.DocIO.DLS.WCharacterFormat@,System.Drawing.RectangleF@,Syncfusion.Layouting.LayoutedWidget,System.Boolean@)">
            <summary>
            Check that previous or next sibling is tab in that line paragraph
            </summary>
            <param name="charFormat">CharacterFormat</param>
            <param name="textBounds">textBounds</param>
            <param name="ltWidget">LayoutedWidget</param>
            <param name="isSameLine">isSameLine</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CalculateTextBounds(System.String,System.Drawing.RectangleF,System.Drawing.Font,System.Drawing.StringFormat,Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.Office.FontScriptType)">
            <summary>
            Calculate the Text Bounds
            </summary>
            <param name="text"></param>
            <param name="textBounds"></param>
            <param name="font"></param>
            <param name="format"></param>
            <param name="charFormat"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddLineToCollection(System.String,System.Boolean,System.Drawing.Font,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.RectangleF,System.Boolean,Syncfusion.Office.FontScriptType)">
            <summary>
            Add the line to the Dictionary collection
            </summary>
            <param name="text"></param>
            <param name="isSubSuperScriptNone"></param>
            <param name="font"></param>
            <param name="charFormat"></param>
            <param name="drawLines"></param>
            <param name="textBounds"></param>
            <param name="isSameLine"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddPictureUnderlineToCollection(Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.RectangleF)">
            <summary>
            Add the line to the Dictionary collection
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsSameLine(System.Single,System.Single,Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.DocIO.DLS.WCharacterFormat,System.Boolean)">
            <summary>
            Check that can we extend the previous Underline to the next text. 
            </summary>
            <param name="boundsRight">Previous boundsRight</param>
            <param name="boundsX">Current boundsX</param>
            <param name="charFormat">Current CharacterFormat</param>
            <param name="preCharFormat">Previous CharacterFormat</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsSame(System.Single,System.Single,System.Int32)">
            <summary>
            Compare the two float values.
            </summary>
            <param name="value1">Value 1</param>
            <param name="value2">value 2</param>
            <param name="digit">Round off value</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.HasUnderlineOrStricthrough(Syncfusion.DocIO.DLS.WTextRange,Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.Office.FontScriptType)">
            <summary>
            Check that text having underline or strike through.
            </summary>
            <param name="txtRange">TextRange</param>
            <param name="charFormat">Charformat</param>
            <param name="scriptType"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.HasUnderlineForPicture(Syncfusion.DocIO.DLS.WPicture)">
            <summary>
            Check whether the picture is having underline.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsContentControlHavingTextRange(Syncfusion.DocIO.DLS.InlineContentControl)">
            <summary>
            Check that the Inline content control having the text range.
            </summary>
            <param name="inlineContentControl"></param>
            <returns>Return true, if the InlineContentControl have text range; Else false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTabWidget(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Checks whether the current widget is tab
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTextBoxWidget(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Get the text box widget of current widget.
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ReverseString(System.String@)">
            <summary>
            Reverse the string
            </summary>
            <param name="text"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawSmallCapString(Syncfusion.Office.FontScriptType,Syncfusion.Office.CharacterRangeType,System.String,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.RectangleF,System.Drawing.Font,System.Drawing.StringFormat,System.Drawing.Brush,System.Boolean)">
            <summary>
            Draws the small cap string.
            </summary>
            <param name="scriptType">scriptType</param>
            <param name="characterRangeType">characterRangeType.</param>
            <param name="text">The text.</param>
            <param name="charFormat">The character format.</param>
            <param name="bounds">The bounds.</param>
            <param name="font">The font.</param>
            <param name="format">The format.</param>
            <param name="textBrush">The text brush.</param>
            <param name="isCharacterSpacing">if set to <c>true</c> [is character spacing].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTextNeedToClip(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Determine whether the text is need to clip when the text range y position is greater than the owner row bottom position
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsWidgetNeedToClipBasedOnXPosition(Syncfusion.Layouting.LayoutedWidget,System.Single@,System.Drawing.RectangleF)">
            <summary>
            Determine whether the text is need to clip when the text range x position is beyond the cell bounds or crossing the cell bounds
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetColumnIndex(Syncfusion.DocIO.DLS.WSection,System.Drawing.RectangleF)">
            <summary>
            Gets the index of the column.
            </summary>
            <param name="section">The section.</param>
            <param name="sectionBounds">The section bounds.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetClipTopPosition(System.Drawing.RectangleF,System.Boolean)">
            <summary>
            Get Y position to clip paragraph items
            </summary>
            <param name="bounds"></param>
            <param name="isInlinePicture"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetDefaultFont(Syncfusion.Office.FontScriptType,System.Drawing.Font,Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Get Default font to render non east characters
            </summary>
            <param name="scriptType"></param>
            <param name="font"></param>
            <param name="charFormat"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawStringBasedOnCharSpacing(Syncfusion.Office.FontScriptType,Syncfusion.Office.CharacterRangeType,System.Drawing.Font,System.Drawing.Brush,System.Drawing.RectangleF,System.String,System.Drawing.StringFormat,Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Draw String based on CharacterSpacing
            </summary>
            <param name="scriptType">Script Type</param>
            <param name="characterRangeType">Character Range Type</param>
            <param name="font">Font style of current Layouted widget</param>
            <param name="textBrush">Text brush</param>
            <param name="bounds">Layouted widget bounds</param>
            <param name="text">Text</param>
            <param name="format">string format</param>
            <param name="charFormat">character Format</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawStringBasedOnExpandedCharSpacing(Syncfusion.Office.FontScriptType,System.Drawing.Font,System.Drawing.RectangleF,System.String,System.Drawing.StringFormat,Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Draws a string based on expanded character spacing.
            </summary>
            <param name="scriptType">The script type of the text.</param>
            <param name="font">The font used for drawing the text.</param>
            <param name="bounds">The bounds within which the text is drawn.</param>
            <param name="text">The text to be drawn.</param>
            <param name="format">The string format.</param>
            <param name="charFormat">The character format.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.TransformGraphicsPosition(Syncfusion.Layouting.LayoutedWidget,System.Boolean,System.Boolean@,System.Drawing.PointF@,System.Single@,Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Transform the graphics rendering positions based on rotation angle
            </summary>
            <param name="ltWidget">Current ltWidget</param>
            <param name="isNeedToScale">set to <c>true</c> when the widget need to scale</param>
            <param name="isRotateTransformApplied">set to <c>true</c> when the widget rotate transform is applied</param>
            <param name="translatePoints">Translation points </param>
            <param name="rotationAngle">Rotation angle</param>
            <param name="ownerParagraph">OwnerParagraph</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateXYPosition(System.Single@,System.Single@,Syncfusion.DocIO.DLS.Entity,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Update the X and Y position
            </summary>
            <param name="xPosition">X posiiton</param>
            <param name="yPosition">Y position</param>
            <param name="entity">Owner entity</param>
            <param name="ltWidget">Layouted Widget</param>
            <remarks>Update the X and Y position when document has different page setup.</remarks>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLayoutedTextBoxContentHeight(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Gets the height of the layouted text box content.
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetWidthToShiftVerticalText(Syncfusion.DocIO.DLS.VerticalAlignment,System.Single,System.Single)">
            <summary>
            Get Width to shift vertical text
            </summary>
            <param name="verticalAlignment"></param>
            <param name="cellLayoutedHeight"></param>
            <param name="cellHeight"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetClipBounds(System.Drawing.RectangleF,System.Single,System.Single)">
            <summary>
            Get Bounds to clip the text
            </summary>
            <param name="bounds"></param>
            <param name="clipWidth"></param>
            <param name="clipTop"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateClipBounds(System.Drawing.RectangleF,System.Drawing.RectangleF)">
            <summary>
            Update clip bounds based on vertical cell 
            </summary>
            <param name="clipBounds"></param>
            <param name="ownerClipBounds"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateClipBoundsBasedOnOwner(System.Drawing.RectangleF,System.Drawing.RectangleF)">
            <summary>
            Update clipping bounds based on owner clipping
            </summary>
            <param name="clipBounds"></param>
            <param name="ownerClipBounds"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetCellHeightForVerticalText(Syncfusion.DocIO.DLS.Entity)">
            <summary>
            Get Height of the cell with text direction as vertical
            </summary>
            <param name="ent"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawChineseText(Syncfusion.Office.FontScriptType,Syncfusion.Office.CharacterRangeType,System.String,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.Font,System.Drawing.Brush,System.Drawing.RectangleF,System.Drawing.StringFormat)">
            <summary>
            Draw Chinese Text
            </summary>
            <param name="scriptType"></param>
            <param name="characterRangeType"></param>
            <param name="text"></param>
            <param name="charFormat"></param>
            <param name="font"></param>
            <param name="textBrush"></param>
            <param name="bounds"></param>
            <param name="format"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.PDFDrawString(System.String,Syncfusion.Pdf.Graphics.PdfFont,Syncfusion.Pdf.Graphics.PdfBrush,System.Single,System.Single,Syncfusion.Pdf.Graphics.PdfStringFormat)">
            <summary>
            Draw String method for Drawing the string without its width and height
            </summary>
            <param name="text"></param>
            <param name="font"></param>
            <param name="brush"></param>
            <param name="x"></param>
            <param name="y"></param>
            <param name="stringFormat"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsInvalidCharacter(System.String)">
            <summary>
            Checks whether the text is valid. (applicable for Arial text)
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawUnicodeText(Syncfusion.Office.FontScriptType,Syncfusion.Office.CharacterRangeType,System.String,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.Font,System.Drawing.Brush,System.Drawing.RectangleF,System.Drawing.StringFormat)">
            <summary>
            Draw Unicode Text
            </summary>
            <param name="scriptType"></param>
            <param name="characterRangeType"></param>
            <param name="text"></param>
            <param name="charFormat"></param>
            <param name="font"></param>
            <param name="textBrush"></param>
            <param name="bounds"></param>
            <param name="format"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawUnicodeString(Syncfusion.Office.FontScriptType,Syncfusion.Office.CharacterRangeType,System.String,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.Font,System.Drawing.Brush,System.Drawing.RectangleF,System.Drawing.StringFormat)">
            <summary>
            Draw unicode string
            </summary>
            <param name="scriptType"></param>
            <param name="characterRangeType"></param>
            <param name="text"></param>
            <param name="charFormat"></param>
            <param name="font"></param>
            <param name="textBrush"></param>
            <param name="bounds"></param>
            <param name="format"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsOwnerParagraphEmpty(System.String)">
            <summary>
            Determines whether the owner paragraph is empty
            </summary>
            <param name="text">text</param>
            <returns>
                <c>true</c> if owner paragraph is empty, set to <c>true</c>.
            </returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsNeedToScaleInMeasuring(Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Checks whether we need to scale the text while measuring
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.RotateAndScaleTransform(System.Drawing.RectangleF@,System.Drawing.RectangleF@,System.Single,System.Drawing.PointF,System.Single,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Rotate and scale the graphics transform matrix
            </summary>
            <param name="bounds">Layoted widget bounds</param>
            <param name="clipBounds">Clip bounds</param>
            <param name="scaleFactor">Scaling factor value</param>
            <param name="translatePoints">Translation points</param>
            <param name="rotationAngle">Rotation angle</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ScaleTransformMatrix(System.Single,System.Drawing.PointF,System.Single,System.Boolean,System.Boolean)">
            <summary>
            Scale the graphics transform matrix.
            </summary>
            <param name="scaleFactor">Scaling factor value</param>
            <param name="translatePoints">Translation points</param>
            <param name="rotationAngle">Rotation angle</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.PrepareMatrix(System.Drawing.Drawing2D.Matrix,System.Single)">
            <summary>
            Prepares a matrix to PDF.
            </summary>
            <param name="matrix">The matrix.</param>
            <param name="pageScale">The page scale value.</param>
            <returns>
            A properly prepared PdfTransformationMatrix class instance.
            </returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawParagraphBorders(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.DocIO.DLS.WParagraphFormat,Syncfusion.Layouting.LayoutedWidget,System.Boolean)">
            <summary>
            Draws the paragraph borders.
            </summary>
            <param name="paragraph">the paragraph</param>
            <param name="paraFormat">The paragraph format.</param>
            <param name="ltWidget">The lt widget.</param>
            <param name="isParagraphMarkIsHidden">isParagraphMarkIsHidden</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawParagraphBorders(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Border},System.Drawing.RectangleF,Syncfusion.DocIO.DLS.Borders,Syncfusion.DocIO.DLS.Borders,Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the paragraph borders
            </summary>
            <param name="borderRenderingOrder">Collection of borders, contains the each border rendering order</param>
            <param name="bounds">Border bounds</param>
            <param name="borders">Current paragraph borders</param>
            <param name="previousBorder">Previous paragraph borders</param>
            <param name="paragraph">Paragraph</param>
            <param name="ltWidget">Layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawHorizontalBorder(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Border},System.Drawing.RectangleF,Syncfusion.DocIO.DLS.Borders,Syncfusion.DocIO.DLS.Border,System.Boolean,System.Boolean,System.Boolean,System.Single,System.Single,System.Single,Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the horizontal border.
            </summary>
            <param name="borderRenderingOrder">The border rendering order.</param>
            <param name="bounds">The bounds.</param>
            <param name="borders">The borders.</param>
            <param name="border">The border.</param>
            <param name="isMultiLineLeftBorder">if set to <c>true</c> [is multi line left border].</param>
            <param name="isMultiLineRightBorder">if set to <c>true</c> [is multi line right border].</param>
            <param name="isMultiLineHorizontalBorder">if set to <c>true</c> [is multi line horizontal border].</param>
            <param name="betweenBorderLineWidth">Width of the between border line.</param>
            <param name="leftBorderLineWidth">Width of the left border line.</param>
            <param name="rightBorderLineWidth">Width of the right border line.</param>
            <param name="paragraph">Paragraph</param>
            <param name="ltWidget">Layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawLeftBorder(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Border},System.Drawing.RectangleF,Syncfusion.DocIO.DLS.Borders,Syncfusion.DocIO.DLS.Border,Syncfusion.DocIO.DLS.Borders,System.Boolean,System.Boolean,System.Boolean,System.Boolean,System.Single,System.Single,System.Single,System.Single,Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the left border.
            </summary>
            <param name="borderRenderingOrder">The border rendering order.</param>
            <param name="bounds">The bounds.</param>
            <param name="borders">The borders.</param>
            <param name="border">The border.</param>
            <param name="previousBorder">The previous border.</param>
            <param name="isMultiLineTopBorder">if set to <c>true</c> [is multi line top border].</param>
            <param name="isMultiLineBottomBorder">if set to <c>true</c> [is multi line bottom border].</param>
            <param name="isMultiLineLeftBorder">if set to <c>true</c> [is multi line left border].</param>
            <param name="isMultiLineHorizontalBorder">if set to <c>true</c> [is multi line horizontal border].</param>
            <param name="leftBorderLineWidth">Width of the left border line.</param>
            <param name="topBorderLineWidth">Width of the top border line.</param>
            <param name="betweenBorderLineWidth">Width of the between border line.</param>
            <param name="bottomBorderLineWidth">Width of the bottom border line.</param>
            <param name="paragraph">Paragraph</param>
            <param name="ltWidget">Layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawRightBorder(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Border},System.Drawing.RectangleF,Syncfusion.DocIO.DLS.Borders,Syncfusion.DocIO.DLS.Border,Syncfusion.DocIO.DLS.Borders,System.Boolean,System.Boolean,System.Boolean,System.Boolean,System.Single,System.Single,System.Single,System.Single,Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the right border.
            </summary>
            <param name="borderRenderingOrder">The border rendering order.</param>
            <param name="bounds">The bounds.</param>
            <param name="borders">The borders.</param>
            <param name="border">The border.</param>
            <param name="previousBorder">The previous border.</param>
            <param name="isMultiLineTopBorder">if set to <c>true</c> [is multi line top border].</param>
            <param name="isMultiLineHorizontalBorder">if set to <c>true</c> [is multi line horizontal border].</param>
            <param name="isMultiLineRightBorder">if set to <c>true</c> [is multi line right border].</param>
            <param name="isMultiLineBottomBorder">if set to <c>true</c> [is multi line bottom border].</param>
            <param name="rightBorderLineWidth">Width of the right border line.</param>
            <param name="topBorderLineWidth">Width of the top border line.</param>
            <param name="betweenBorderLineWidth">Width of the between border line.</param>
            <param name="bottomBorderLineWidth">Width of the bottom border line.</param>
            <param name="paragraph">Paragraph</param>
            <param name="ltWidget">Layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTopBorder(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Border},System.Drawing.RectangleF,Syncfusion.DocIO.DLS.Borders,Syncfusion.DocIO.DLS.Border,System.Boolean,System.Single,System.Single,System.Single)">
            <summary>
            Draws the top border.
            </summary>
            <param name="borderRenderingOrder">The border rendering order.</param>
            <param name="bounds">The bounds.</param>
            <param name="borders">The borders.</param>
            <param name="border">The border.</param>
            <param name="isMultiLineTopBorder">if set to <c>true</c> [is multi line top border].</param>
            <param name="topBorderLineWidth">Width of the top border line.</param>
            <param name="leftBorderLineWidth">Width of the left border line.</param>
            <param name="rightBorderLineWidth">Width of the right border line.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawBottomBorder(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Border},System.Drawing.RectangleF,Syncfusion.DocIO.DLS.Borders,Syncfusion.DocIO.DLS.Border,System.Boolean,System.Single,System.Single,System.Single,Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the bottom border.
            </summary>
            <param name="borderRenderingOrder">The border rendering order.</param>
            <param name="bounds">The bounds.</param>
            <param name="borders">The borders.</param>
            <param name="border">The border.</param>
            <param name="isMultiLineBottomBorder">if set to <c>true</c> [is multi line bottom border].</param>
            <param name="leftBorderLineWidth">Width of the left border line.</param>
            <param name="bottomBorderLineWidth">Width of the bottom border line.</param>
            <param name="rightBorderLineWidth">Width of the right border line.</param>
            <param name="paragraph">Paragraph</param>
            <param name="ltWidget">Layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetSpaceForBottomBorder(Syncfusion.DocIO.DLS.Entity)">
            <summary>
            If paragraph inside Text box or shape have bottom border and that paragraph is the last element of textbox means 
            Microsoft word will preserve the bottom border at the top of the bottom margin of text box or shape by subtracting the internal bottom margin spacing and the text box or shape line width.
            </summary>
            <param name="entity"></param>
            <returns>The spacing between the paragraph bottom border and textbox's or shape's bottom border</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.SortTwoBorders(System.Collections.Generic.List{Syncfusion.DocIO.DLS.Border},Syncfusion.DocIO.DLS.Border,Syncfusion.DocIO.DLS.Border,Syncfusion.DocIO.DLS.Borders,System.Boolean)">
            <summary>
            Sort the borders based on brightness
            </summary>
            <param name="renderingOrderList">Border rendering order list</param>
            <param name="firstBorder">Horizontal border</param>
            <param name="secondBorder">Either left border/right border</param>
            <param name="borders">Current paragraph borders</param>
            <param name="isLeftBorder">To ensure wether we need to remove left or right border</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddNextParagraphBounds(Syncfusion.Layouting.LayoutedWidget,System.Drawing.RectangleF@)">
            <summary>
            Adds the next paragraph bounds.
            </summary>
            <param name="layoutedWidget">The layouted widget.</param>
            <param name="bounds">The bounds.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawRevisionMark(System.Drawing.PointF,System.Drawing.PointF,System.Drawing.Color,System.Single)">
            <summary>
            Draw the revision bars in the specified color and width
            </summary>
            <param name="start">Start point of the revision bar</param>
            <param name="end">End point of the revision bar</param>
            <param name="lineColor">Color of the revision bar</param>
            <param name="lineWidth">Width of the revision bar</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF)">
            <summary>
            Draws the border.
            </summary>
            <param name="border">The border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawParagraphBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF)">
            <summary>
            Draws the border.
            </summary>
            <param name="border">The border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawBorder(Syncfusion.Layouting.CellLayoutInfo.CellBorder,System.Drawing.PointF,System.Drawing.PointF)">
            <summary>
            Draws the border.
            </summary>
            <param name="border">The border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTable(Syncfusion.DocIO.DLS.WTable,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the table.
            </summary>
            <param name="table">The table.</param>
            <param name="ltWidget">The lt widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBottomCellSpacingBounds(System.Single,Syncfusion.Layouting.LayoutedWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Gets the bottom cell spacing bounds.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTopCellSpacingBounds(System.Single,Syncfusion.Layouting.LayoutedWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Gets the top cell spacing bounds.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRightCellSpacingBounds(System.Single,Syncfusion.Layouting.LayoutedWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Gets the right cell spacing bounds.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLeftCellSpacingBounds(System.Single,Syncfusion.Layouting.LayoutedWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Gets the left cell spacing bounds.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetWholeCellBounds(System.Single,Syncfusion.Layouting.LayoutedWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Get the cell bounds along with cell spacing.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FillTableBackgroundColor(Syncfusion.DocIO.DLS.WTable,System.Drawing.RectangleF)">
            <summary>
            Fills the table background color for the given bounds.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTableRow(Syncfusion.DocIO.DLS.WTableRow,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the table row.
            </summary>
            <param name="row">The row.</param>
            <param name="ltWidget">The lt widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTableCell(Syncfusion.DocIO.DLS.WTableCell,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the table cell.
            </summary>
            <param name="cell">The cell.</param>
            <param name="ltWidget">The lt widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FillCellColor(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Fill the Cell Color
            </summary>
            <param name="ltWidget">The Layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTexBoxHaveBackgroundPicture(Syncfusion.DocIO.DLS.WTextBox)">
            <summary>
            Checks the TextBox for Background picture.
            </summary>
            <param name="textbox"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTextureStyle(Syncfusion.DocIO.TextureStyle,System.Drawing.Color,System.Drawing.Color,System.Drawing.RectangleF)">
            <summary>
            Draws the texture style.
            </summary>
            <param name="textureStyle"></param>
            <param name="foreColor"></param>
            <param name="backColor"></param>
            <param name="bounds"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetForeColor(System.Drawing.Color,System.Drawing.Color,System.Single)">
            <summary>
            Gets the fore color.
            </summary>
            <param name="foreColor"></param>
            <param name="backColor"></param>
            <param name="percent"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetColorValue(System.Int32,System.Int32,System.Single,System.Boolean,System.Boolean)">
            <summary>
            Gets the color value.
            </summary>
            <param name="foreColorValue">The fore color value.</param>
            <param name="backColorValue">The back color value.</param>
            <param name="percent">The percent.</param>
            <param name="isForeColorEmpty">isForeColorEmpty</param>
            <param name="isBackColorEmpty">isBackColorEmpty</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FillTexture(Syncfusion.DocIO.TextureStyle,System.Drawing.Color,System.Drawing.Color,System.Drawing.RectangleF)">
            <summary>
            Fill Texture within the bounds
            </summary>
            <param name="textureStyle">Texture Style</param>
            <param name="foreColor">Fore Color</param>
            <param name="backColor">Back Color</param>
            <param name="bounds">Bounds</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCellBorders(Syncfusion.DocIO.DLS.WTableCell,Syncfusion.Layouting.LayoutedWidget,System.Single)">
            <summary>
            Draws the cell borders.
            </summary>
            <param name="cell">The cell.</param>
            <param name="ltWidget">The lt widget.</param>
            <param name="previousCellsTopBorderWidth">The previous cells top border width</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineLeftBorder(Syncfusion.Layouting.CellLayoutInfo,Syncfusion.Layouting.CellLayoutInfo.CellBorder,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the multi line left border.
            </summary>
            <param name="cellLayoutInfo">The cell layout information.</param>
            <param name="leftBorder">The left border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isFirstRow">if set to <c>true</c> [is first row].</param>
            <param name="isLastRow">if set to <c>true</c> [is last row].</param>
            <param name="isFirstCell">if set to <c>true</c> [is first cell].</param>
            <param name="isLastCell">if set to <c>true</c> [is last cell].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineLeftBorder(Syncfusion.Layouting.CellLayoutInfo,Syncfusion.Layouting.CellLayoutInfo.CellBorder,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the double line left border.
            </summary>
            <param name="cellLayoutInfo">The cell layout information.</param>
            <param name="leftBorder">The left border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isFirstRow">if set to <c>true</c> [is first row].</param>
            <param name="isLastRow">if set to <c>true</c> [is last row].</param>
            <param name="isFirstCell">if set to <c>true</c> [is first cell].</param>
            <param name="isLastCell">if set to <c>true</c> [is last cell].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineRightBorder(Syncfusion.Layouting.CellLayoutInfo,Syncfusion.Layouting.CellLayoutInfo.CellBorder,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the multi line right border.
            </summary>
            <param name="cellLayoutInfo">The cell layout information.</param>
            <param name="rightBorder">The right border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isFirstRow">if set to <c>true</c> [is first row].</param>
            <param name="isLastRow">if set to <c>true</c> [is last row].</param>
            <param name="isFirstCell">if set to <c>true</c> [is first cell].</param>
            <param name="isLastCell">if set to <c>true</c> [is last cell].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineRightBorder(Syncfusion.Layouting.CellLayoutInfo,Syncfusion.Layouting.CellLayoutInfo.CellBorder,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the right double line border.
            </summary>
            <param name="cellLayoutInfo">The cell layout information.</param>
            <param name="rightBorder">The right border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isFirstRow">if set to <c>true</c> [is first row].</param>
            <param name="isLastRow">if set to <c>true</c> [is last row].</param>
            <param name="isFirstCell">if set to <c>true</c> [is first cell].</param>
            <param name="isLastCell">if set to <c>true</c> [is last cell].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineBottomBorder(Syncfusion.Layouting.CellLayoutInfo,System.Drawing.PointF,System.Drawing.PointF,System.Boolean)">
            <summary>
            Draws the multi line bottom border.
            </summary>
            <param name="cellLayoutInfo">The cell layout information.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isBiDiTable">isBiDiTable</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineBottomBorder(Syncfusion.Layouting.CellLayoutInfo,System.Drawing.PointF,System.Drawing.PointF,System.Boolean)">
            <summary>
            Draws the double line bottom border.
            </summary>
            <param name="cellLayoutInfo">The cell layout information.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isBiDiTable">isBiDiTable</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineTopBorder(Syncfusion.Layouting.CellLayoutInfo,Syncfusion.Layouting.CellLayoutInfo.CellBorder,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean)">
            <summary>
            Draws the multi line top border.
            </summary>
            <param name="cellLayoutInfo">The cell layout information.</param>
            <param name="topBorder">The top border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isStart">if set to <c>true</c> [is start].</param>
            <param name="isEnd">if set to <c>true</c> [is end].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineTopBorder(Syncfusion.Layouting.CellLayoutInfo,Syncfusion.Layouting.CellLayoutInfo.CellBorder,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean)">
            <summary>
            Draws the top double line border.
            </summary>
            <param name="cellLayoutInfo">The cell layout information.</param>
            <param name="topBorder">The top border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isStart">if set to <c>true</c> [is start].</param>
            <param name="isEnd">if set to <c>true</c> [is end].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsMultiLineBorder(Syncfusion.DocIO.DLS.BorderStyle)">
            <summary>
            Determines whether the specified border is multiline border
            </summary>
            <param name="borderType">Type of the border.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsMultiLineParagraphBorder(Syncfusion.DocIO.DLS.BorderStyle)">
            <summary>
            Determines whether [is multi line paragraph border] [the specified border type].
            </summary>
            <param name="borderType">Type of the border.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBorderLineWidthArray(Syncfusion.DocIO.DLS.BorderStyle,System.Single)">
            <summary>
            Gets the border line array.
            </summary>
            <param name="borderType">Type of the border.</param>
            <param name="lineWidth">Width of the line.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsDoubleBorder(Syncfusion.DocIO.DLS.Border)">
            <summary>
            To identify whether current border is double line border or triple line border
            </summary>
            <param name="border">Current border which is need to be check</param>
            <returns><c>True</c>id the current border type is double border</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineLeftBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the multi line left border.
            </summary>
            <param name="leftBorder">The left border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isTopBorderSame">if set to <c>true</c> [is top border same].</param>
            <param name="isBetweenBorderSame">if set to <c>true</c> [is between border same].</param>
            <param name="isBottomBorderSame">if set to <c>true</c> [is bottom border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineLeftBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the double line left border.
            </summary>
            <param name="leftBorder">The left border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isTopBorderSame">if set to <c>true</c> [is top border same].</param>
            <param name="isBetweenBorderSame">if set to <c>true</c> [is between border same].</param>
            <param name="isBottomBorderSame">if set to <c>true</c> [is bottom border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTripleLineLeftBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the triple line left border.
            </summary>
            <param name="leftBorder">The left border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isTopBorderSame">if set to <c>true</c> [is top border same].</param>
            <param name="isBetweenBorderSame">if set to <c>true</c> [is between border same].</param>
            <param name="isBottomBorderSame">if set to <c>true</c> [is bottom border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineRightBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the multi line right border.
            </summary>
            <param name="rightBorder">The right border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isTopBorderSame">if set to <c>true</c> [is top border same].</param>
            <param name="isBetweenBorderSame">if set to <c>true</c> [is between border same].</param>
            <param name="isBottomBorderSame">if set to <c>true</c> [is bottom border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineRightBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the double line right border.
            </summary>
            <param name="rightBorder">The right border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isTopBorderSame">if set to <c>true</c> [is top border same].</param>
            <param name="isBetweenBorderSame">if set to <c>true</c> [is between border same].</param>
            <param name="isBottomBorderSame">if set to <c>true</c> [is bottom border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTripleLineRightBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Draws the triple line right border.
            </summary>
            <param name="rightBorder">The right border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isTopBorderSame">if set to <c>true</c> [is top border same].</param>
            <param name="isBetweenBorderSame">if set to <c>true</c> [is between border same].</param>
            <param name="isBottomBorderSame">if set to <c>true</c> [is bottom border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineTopBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean)">
            <summary>
            Draws the multi line top border.
            </summary>
            <param name="topBorder">The top border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineTopBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean)">
            <summary>
            Draws the double line top border.
            </summary>
            <param name="topBorder">The top border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTripleLineTopBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean)">
            <summary>
            Draws the triple line top border.
            </summary>
            <param name="topBorder">The top border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineBottomBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean)">
            <summary>
            Draws the multi line bottom border.
            </summary>
            <param name="bottomBorder">The bottom border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineBottomBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean)">
            <summary>
            Draws the double line bottom border.
            </summary>
            <param name="bottomBorder">The bottom border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLine(Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.DocIO.DLS.BorderStyle,System.Single,System.Drawing.PointF,System.Drawing.PointF)">
            <summary>
            Draw the double line for the text.
            </summary>
            <param name="charFormat">charFormat</param>
            <param name="borderType">borderType</param>
            <param name="lineWidth">lineWidth</param>
            <param name="start">start point</param>
            <param name="end">end point</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTripleLineBottomBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean)">
            <summary>
            Draws the triple line bottom border.
            </summary>
            <param name="bottomBorder">The bottom border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMultiLineBetweenBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,Syncfusion.DocIO.DLS.Border,Syncfusion.DocIO.DLS.Border,System.Boolean,System.Boolean)">
            <summary>
            Draws the multi line between border.
            </summary>
            <param name="betweenBorder">The between border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
            <param name="leftBorder">The left border.</param>
            <param name="rightBorder">The right border.</param>
            <param name="isOverlapLeft">if set to <c>true</c> [is overlap left].</param>
            <param name="isOverlapRight">if set to <c>true</c> [is overlap right].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawDoubleLineBetweenBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,Syncfusion.DocIO.DLS.Border,Syncfusion.DocIO.DLS.Border,System.Boolean,System.Boolean)">
            <summary>
            Draws the double line between border.
            </summary>
            <param name="betweenBorder">The between border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
            <param name="leftBorder">The left border.</param>
            <param name="rightBorder">The right border.</param>
            <param name="isOverlapLeft">if set to <c>true</c> [is overlap left].</param>
            <param name="isOverlapRight">if set to <c>true</c> [is overlap right].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTripleLineBetweenBorder(Syncfusion.DocIO.DLS.Border,System.Drawing.PointF,System.Drawing.PointF,System.Boolean,System.Boolean,Syncfusion.DocIO.DLS.Border,Syncfusion.DocIO.DLS.Border,System.Boolean,System.Boolean)">
            <summary>
            Draws the triple line between border.
            </summary>
            <param name="betweenBorder">The between border.</param>
            <param name="start">The start.</param>
            <param name="end">The end.</param>
            <param name="isLeftBorderSame">if set to <c>true</c> [is left border same].</param>
            <param name="isRightBorderSame">if set to <c>true</c> [is right border same].</param>
            <param name="leftBorder">The left border.</param>
            <param name="rightBorder">The right border.</param>
            <param name="isOverlapLeft">if set to <c>true</c> [is overlap left].</param>
            <param name="isOverlapRight">if set to <c>true</c> [is overlap right].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLeftRightLineWidht(System.Single[],System.Boolean)">
            <summary>
            Gets the adjacent border line width
            </summary>
            <param name="lineArray">Left or right border line array</param>
            <param name="isLeft"><c>true</c> if we passing left border line array; otherwise false</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawBackgroundColor(System.Drawing.Color,System.Int32,System.Int32)">
            <summary>
            Draws the color of the background.
            </summary>
            <param name="bgColor">Color of the bg.</param>
            <param name="width">The width.</param>
            <param name="height">The height.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawBackgroundImage(System.Drawing.Image,Syncfusion.DocIO.DLS.WPageSetup)">
            <summary>
            Draws the back ground image.
            </summary>
            <param name="image">The image.</param>
            <param name="pageSetup">The page setup.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawWatermark(Syncfusion.DocIO.DLS.Watermark,Syncfusion.DocIO.DLS.WPageSetup,System.Drawing.RectangleF)">
            <summary>
            Draws the Watermark
            </summary>
            <param name="watermark">Watermark</param>
            <param name="pageSetup">Page setup</param>
            <param name="bounds">Bounds</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.Rendering.Page,System.Int32@)">
            <summary>
            Imlementation of Draw method of page. 
            </summary>
            <param name="page">Currentl drawing page</param>
            <param name="autoTagsCount">autoTagsCount</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawPageBackgroundTextureFill(System.Drawing.Brush,System.Single,System.Single)">
            <summary>
            Draws the page background using a gradient-filled texture brush.
            Generates a transparent PNG from the gradient and tiles it across the page.
            </summary>
            <param name="brush">Gradient brush to render.</param>
            <param name="pageWidth">Width of the page in points.</param>
            <param name="pageHeight">Height of the page in points.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPreviousLineCommentStartMark">
            <summary>
            Retrieves the list of previous line comment start marks and clears the current marks.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawMarkupTriangles(System.Drawing.PointF,System.Drawing.Color)">
            <summary>
            Draws Markup triangles.
            </summary>
            <param name="position">Position to draw the triangle.</param>
            <param name="revisionColor">Revision Color</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsEmptyWaterMark(Syncfusion.DocIO.DLS.Watermark)">
            <summary>
            Checks the current watermark is empty watermark or not.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsWaterMarkNeedToBeDraw(Syncfusion.DocIO.DLS.Rendering.Page,Syncfusion.DocIO.DLS.HeaderFooter)">
            <summary>
            Checks the HeaderFooter Paragraph and Table Weather WaterMark has to draw first
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsWaterMarkInParagraph(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.DocIO.DLS.Rendering.Page)">
            <summary>
            Checks the paragraph weather watermark in Paragraph
            </summary>
            <param name="paragraph"></param>
            <param name="page"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsWaterMarkInTable(Syncfusion.DocIO.DLS.WTable,Syncfusion.DocIO.DLS.Rendering.Page)">
            <summary>
            Checks the paragraph weather watermark in Table
            </summary>
            <param name="table"></param>
            <param name="page"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsWaterMarkOrderHasChanged(System.Int32,System.Boolean,Syncfusion.DocIO.DLS.Rendering.Page)">
            <summary>
            Checks which One has to draw first watermark or picture,shape,textbox
            </summary>
            <param name="OrderIndex"></param>
            <param name="IsBelowText"></param>
            <param name="page"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.Layouting.SplitWidgetContainer,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the splitWidgetContainer to PDF document or Image.
            </summary>
            <param name="widget">Currentl split widget container</param>
            <param name="layoutedWidget">Layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AlignChildWidgets(Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Align the child widgets.
            </summary>
            <param name="LastLine">The layouted widget.</param>
            <param name="paragraph">The paragraph.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.Layouting.IWidgetContainer,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Imlementation of Draw method of IWidget interface .
            </summary>
            <param name="widget"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawImpl(Syncfusion.Layouting.IWidgetContainer,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw widget to graphics.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.Layouting.IWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the specified dc.
            </summary>
            <param name="widget"></param>
            <param name="layoutedWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsNeedToSkip(Syncfusion.Layouting.IWidget)">
            <summary>
            Check whether the widget is need to drwa or not
            </summary>
            <param name="widget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawPageBorder(System.Int32,Syncfusion.DocIO.DLS.Rendering.PageCollection)">
            <summary>
            Draw the page border
            </summary>
            <param name="pageNumber">Page number</param>
            <param name="pageCollection"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.BookmarkStart,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Imlementation of Draw method of BookMark interface .
            </summary>
            <param name="bookmarkStart"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsNeedToClip(System.Drawing.RectangleF,System.Boolean)">
            <summary>
            Decides whether Clipping is necessary or not.
            </summary>
            <param name="itemBounds"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetHightLightColor(System.Drawing.Color)">
            <summary>
            Get text highlight color
            </summary>
            <param name="itemBounds"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTextRange(Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Check whether the paragrah contains Text range
            </summary>
            <param name="paragraph"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsSpaceOrTab(System.String)">
            <summary>
            checks if the token is space or tab
            </summary>
            <param name="token">text</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawEmptyString(Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.WParagraph)">
            <summary>
            Draw the Empty string with white space to preserve Tags.
            </summary>
            <param name="layoutedWidget"></param>
            <param name="paragraph"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.Layouting.LayoutedWidget,System.Boolean)">
            <summary>
            Imlementation of Draw method of LayoutedWidget interface .
            </summary>
            <param name="layoutedWidget">The Layouted widget.</param>
            <param name="isHaveToInitLayoutInfo">Is need to initialize layout info</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddFloatingItemsOfTable(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Iterate every child elements of the table and add the floating items into the OverLappedShapeWidgets collection
            </summary>
            <param name="layoutedWidget">Table layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsNeedToClipTableBorder(Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.WTable)">
            <summary>
            Check whether we need to clip the border of the nested table.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IterateChildElements(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Iterate the child elements of the paragraph
            </summary>
            <param name="para_LtWidget">Paragraph layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddFloatingItemsInCollection(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Checks whether the child widget is floating item and add into the collection
            </summary>
            <param name="ltWidget">Child layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetSpaceWidthAtEndFromText(Syncfusion.DocIO.DLS.WTextRange,System.String)">
            <summary>
            Get space width at end of the line widget.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsRTLParaLine(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Checks whether the paragraph line is RTL.
            </summary>
            <param name="m_currChildLW"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.HasTextRangeBidi(Syncfusion.Layouting.LayoutedWidgetList)">
            <summary>
            Checks whether the paragraph line has text bidi.
            </summary>
            <param name="layoutedWidgets"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsLineItemDrawn(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Check that Line item are drawn.
            </summary>
            <param name="ltWidget">LayoutedWidget</param>
            <returns>Return true, if line items are drawn.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawLine(System.Collections.Generic.Dictionary{Syncfusion.DocIO.DLS.WCharacterFormat,System.Collections.Generic.List{System.Drawing.RectangleF}},System.Collections.Generic.Dictionary{Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.RectangleF},Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the Line Based in the collection.
            </summary>
            <param name="underLineValues">Contains the underline values</param>
            <param name="strikeThroughValues">Contains the strike through values</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.TransformGraphics(Syncfusion.DocIO.DLS.WCharacterFormat,System.Boolean@,System.Boolean@,System.Boolean@,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Transform the graphics based on the rotation and scaling.
            </summary>
            <param name="characterFormat">The character format.</param>
            <param name="isNeedToScale">Indicates whether the line need to scale or not.</param>
            <param name="isRotateTransformApplied">Indicates whether the line rotate transform is applied or not.</param>
            <param name="isNeedToClip">Indicates whether the line need to set clip or not.</param>
            <param name="ltWidget">Line widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTextboxOrShapesRotationValue(System.Single@,System.Boolean@,System.Boolean@,System.Boolean@,Syncfusion.DocIO.DLS.TextWrappingStyle@,System.Boolean@,Syncfusion.DocIO.DLS.WTextRange)">
            <summary>
            Gets the rotation values from the textbox, shapes(ChildShapes/GroupShapes).
            </summary>
            <param name="ang">Specified the rotation angle.</param>
            <param name="flipH">Specifies whether it is vertical flip.</param>
            <param name="flipV">Specifies whether it is horizontally flip.</param>
            <param name="doNotRotateText">Specifies whether the text need to rotate.</param>
            <param name="textWrappingStyle">Specifies the text wrapping style.</param>
            <param name="textRange">Specifies the current textrange.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsNeedToChangeUnderLineWidth(System.String)">
            <summary>
            Checks whether the underline width is need to change or not.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawUnderLine(Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.RectangleF)">
            <summary>
            Draw the underline style.
            </summary>
            <param name="characterFormat"></param>
            <param name="textBounds"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCompoundLine(System.Single[],System.Drawing.PointF[],Syncfusion.Pdf.Graphics.PdfPen,Syncfusion.Pdf.Graphics.PdfGraphics)">
            <summary>
            Draw double underline style using compoundArray property
            </summary>
            <param name="compoundArray"></param>
            <param name="points"></param>
            <param name="pen"></param>
            <param name="PDFGraphics"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateWavyPath(Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.RectangleF,System.Drawing.Font)">
            <summary>
            Draw a wavy line using Bezier points
            </summary>
            <param name="characterFormat">represents the character properties of the text</param>
            <param name="bounds">represents the bounds of the text</param>
             <param name="font">represents the font of the text</param>
            <returns>Returns the Object of PDFGraphics to draw the wavy line</returns>
            <Remarks>To-Do:- PdfPath.AddCurve() method is not supported in PDF library. So, only here we are using PdfPath.AddBezier() method to draw the wavy line</Remarks>
        </member>
        <!-- Badly formed XML comment ignored for member "M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawStrikeThrough(Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.RectangleF)" -->
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreatePen(Syncfusion.DocIO.DLS.WCharacterFormat,System.Single)">
            <summary>
            Create the Pen to draw the Line for Underline and Strike through.
            </summary>
            <param name="charFormat">charFormat</param>
            <param name="lineWidth">lineWidth</param>
            <returns>Return the Pen to draw the line.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsNeedToRemoveClipBounds(Syncfusion.Layouting.IWidget)">
            <summary>
            Checks whether clip bounds need to remove from container.
            </summary>
            <param name="widget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.TextboxClipBounds(Syncfusion.DocIO.DLS.WTable,System.Drawing.RectangleF)">
            <summary>
            Increase the bounds with the table paddings.
            </summary>
            <param name="table"></param>
            <param name="clipBounds"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateClipBounds(System.Drawing.RectangleF,System.Boolean)">
            <summary>
            Updates the clip bounds based on its owner clip bounds.
            </summary>
            <param name="clipBounds"></param>
            <param name="reverseClipping"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.SetClip(System.Drawing.RectangleF)">
            <summary>
            Sets clipping for the particular region.
            </summary>
            <param name="clippingBounds"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ResetTransform">
            <summary>
            Resets Graphics Transform positions.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.SetScaleTransform(System.Single,System.Single)">
            <summary>
            Scale the graphics with input X and Y scaling values.
            </summary>
            <param name="sx">Specify the scaling factor of X.</param>
            <param name="sy">Specify the scaling factor of Y.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetClippingBounds(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Get the bounds based on the frame content.
            </summary>
            <param name="cellltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the paragraph
            </summary>
            <param name="paragraph"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCommentHighlighter(Syncfusion.Layouting.LayoutedWidget,Syncfusion.DocIO.DLS.WordDocument)">
            <summary>
            Draw a Comment highlighter for the line.
            </summary>
            <param name="ltWidget">Represents a layouted widget of line.</param>
            <param name="document">Represents a WordDocument.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetKeyValuePair(System.String,System.Collections.Generic.List{System.Collections.Generic.KeyValuePair{System.String,System.Boolean}})">
            <summary>
            Gets a KeyValuePair for the specified key from specified collection.
            </summary>
            <param name="inputKey">Represents a input key to find.</param>
            <param name="keyValuePairCollection">Represents a KVP colection.</param>
            <returns>Returns a KeyValuePair for the specified key from specified collection.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ContainsKey(System.String,System.Collections.Generic.List{System.Collections.Generic.KeyValuePair{System.String,System.Boolean}})">
            <summary>
            Check whether a KeyValuePair is available in specified collection for the specified key.
            </summary>
            <param name="inputKey">Represents a input key to find.</param>
            <param name="keyValuePairCollection">Represents a KVP colection.</param>
            <returns>Returns a true, if KeyValuePair available in specified collection; Otherwise false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCommentHighlighter(Syncfusion.DocIO.DLS.RevisionOptions,System.Drawing.RectangleF,System.Boolean)">
            <summary>
            Draw a comment highlighter.
            </summary>
            <param name="hightLightColor"></param>
            <param name="bounds"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetMaximumHeightWidget(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Gets maximum height widget of line.
            </summary>
            <param name="ltWidget">Represent a layouted widget of line.</param>
            <returns>Returns a LayoutedWidget, which has maximum height in line.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsLinesInteresectWithFloatingItems(Syncfusion.Layouting.LayoutedWidget,System.Boolean)">
            <summary>
            Check whether any of line for current paragraph intersect with floating items.
            </summary>
            <param name="ltWidget">Current widget</param>
            <param name="isLineContainer">Whether this is line or line container</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawLineBackGroundColors(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the back ground colour for current line.
            </summary>
            <param name="paragraph">Current paragraph</param>
            <param name="ltWidget">Current line widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBackGroundColorRenderingBounds(Syncfusion.Layouting.LayoutedWidget,System.Drawing.RectangleF)">
            <summary>
            Find the Back ground color rendering bounds.
            </summary>
            <param name="ltWidget"></param>
            <param name="remaingingBounds"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindFillColorBounds(System.Boolean@,System.Drawing.RectangleF,System.Collections.Generic.List{System.Drawing.RectangleF},System.Drawing.RectangleF)">
            <summary>
            Check whether line preserved left or right or between floating items.
            </summary>
            <param name="isNeedToFindFillColorRenderingBounds"></param>
            <param name="childItemBounds"></param>
            <param name="intersectingBoundsCollection"></param>
            <param name="remaingingBounds"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetInnerItemsRenderingBounds(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Get the current child widget total bounds.
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.Layouting.SplitTableWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the split table widget
            </summary>
            <param name="splitTableWidget"></param>
            <param name="layoutedWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.BlockContentControl,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw method for BlockContentControl
            </summary>
            <param name="SDT"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.InlineContentControl,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw method for InlineContentControl
            </summary>
            <param name="SDT"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WCommentMark,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw WCommentMark
            </summary>
            <param name="absoluteTab"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WAbsoluteTab,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw AbsoluteTab
            </summary>
            <param name="absoluteTab"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WChart,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw chart as image
            </summary>
            <param name="chart"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawChart(Syncfusion.DocIO.DLS.WChart,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws chart
            </summary>
            <param name="chart"></param>
            <param name="widget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WCheckBox,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the Check box.
            </summary>
            <param name="checkBox"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WDropDownFormField,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the Drop Down Form Field.
            </summary>
            <param name="dropDownFormField"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WField,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the Fields.
            </summary>
            <param name="field"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WOleObject,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw Ole Object.
            </summary>
            <param name="oleObject"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WPicture,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the Picture.
            </summary>
            <param name="picture"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WSymbol,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the symbol.
            </summary>
            <param name="symbol"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WTable,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the table.
            </summary>
            <param name="table"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetFirstItemInFrame(Syncfusion.Layouting.LayoutedWidgetList,System.Int32,Syncfusion.DocIO.DLS.WParagraphFormat)">
            <summary>
            Gets the frames first item.
            </summary>
            <param name="layoutedWidgets"></param>
            <param name="index"></param>
            <param name="originalFormat"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WTableCell,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the table cell.
            </summary>
            <param name="cell"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WTableRow,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the table row.
            </summary>
            <param name="row"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WTextBox,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the textbox.
            </summary>
            <param name="textBox"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WInk,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the Ink.
            </summary>
            <param name="ink">The Ink.</param>
            <param name="ltWidget">The layouted widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawInk(Syncfusion.DocIO.DLS.WInk,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the Ink.
            </summary>
            <param name="ink">The Ink.</param>
            <param name="ltWidget">The layouted widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WSmartArt,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the SmartArt.
            </summary>
            <param name="smartArt">The SmartArt.</param>
            <param name="ltWidget">The layouted widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawSmartArt(Syncfusion.DocIO.DLS.WSmartArt,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the SmartArt.
            </summary>
            <param name="smartArt">The SmartArt.</param>
            <param name="ltWidget">The layouted widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddSmartArtHyperlink(System.Collections.Generic.List{System.Collections.Generic.Dictionary{System.String,System.Collections.Generic.Dictionary{System.String,System.Drawing.RectangleF}}})">
            <summary>
            Add hyperlink in SmartArt
            </summary>
            <param name="uriHyperlinks"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddSmartArtBookmarkHyperlinks(System.Collections.Generic.List{System.Collections.Generic.Dictionary{System.String,System.Object[]}})">
            <summary>
            Adds SmartArt bookmark hyperlinks to the <see cref="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.SmartArtBookmarkHyperlinksList"/>.
            </summary>
            <param name="smartArtBookmarkHyperlinks">A list of dictionaries containing SmartArt bookmark names as keys and an object array as values. 
            The object array typically contains details such as bounds, page number, and screen tip.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WTextFormField,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the text form field.
            </summary>
            <param name="textFormField"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.Layouting.LeafEmtyWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Imlementation of Draw method of LayoutedWidget interface 
            </summary>
            <param name="leafEmtyWidget"></param>
            <param name="layoutedWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.Shape,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the shape to PDF document or Image.
            </summary>
            <param name="shape">Current shape entity</param>
            <param name="ltWidget">Current shale layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WCanvas,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the canvas to PDF document or Image.
            </summary>
            <param name="canvas">Current canvas entity</param>
            <param name="ltWidget">Current canvas layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCanvas(Syncfusion.DocIO.DLS.WCanvas,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the canvas with its background, formatting, and child elements.
            </summary>
            <param name="canvas">The canvas to draw.</param>
            <param name="ltWidget">The layouted widget representing the canvas.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the shape to PDF document or Image.
            </summary>
            <param name="shape">Current shape entity</param>
            <param name="ltWidget">Current shale layouted widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.Layouting.SplitStringWidget,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the splitStringWidget
            </summary>
            <param name="splitStringWidget">SplitStringWidget</param>
            <param name="layoutedWidget">Layouted split string widget</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.DocIO.DLS.WTextRange,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the text ranges.
            </summary>
            <param name="textRange"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Draw(Syncfusion.Layouting.IStringWidget,Syncfusion.Layouting.LayoutedWidget,System.String)">
            <summary>
            Draw widget to graphics.   
            </summary>
            <param name="stringWidget"></param>
            <param name="ltWidget"></param>
            <param name="text"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawImpl(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw widget to graphics.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetOwnerLayoutedWidget(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Get Cell Widget
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetParagraphWidget(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Gets the owner widget of the paragraph
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetCellWidget(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Get owner widget of the cell
            </summary>
            <param name="ltWidget"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsOverLappedShapeWidget(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Determines whether the layouted widget is Overlapping Widget
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <returns>
            	<c>true</c> if the layouted widget is Overlapping shape widget; otherwise, <c>false</c>.
            </returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateWaterMarkPosition(Syncfusion.DocIO.DLS.ParagraphItem,Syncfusion.DocIO.DLS.WPageSetup,System.Drawing.RectangleF)">
            <summary>
            Update the positions of text watermark.
            </summary>
            <param name="pItem">TextWatermark</param>
            <param name="pageSetup"></param>
            <param name="bounds"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawTextWatermark(Syncfusion.DocIO.DLS.TextWatermark,System.Drawing.RectangleF,Syncfusion.DocIO.DLS.WPageSetup)">
            <summary>
            Draw the text watermark.
            </summary>
            <param name="textWatermark"></param>
            <param name="bounds"></param>
            <param name="pageSetup"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ConvertAsImage(Syncfusion.DocIO.DLS.TextWatermark,System.Drawing.Font)">
            <summary>
            Convert the Watermark text as Bitmap Image.
            </summary>
            <param name="textWatermark"></param>
            <param name="font"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ChangeColorBrightness(System.Drawing.Color,System.Single)">
            <summary>
            Change the given color brightness
            </summary>
            <param name="color"></param>
            <param name="correctionFactor"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawPageBorder(Syncfusion.DocIO.DLS.WPageSetup,System.Drawing.RectangleF,System.Drawing.RectangleF,System.Drawing.RectangleF)">
            <summary>
            Draw border for the page
            </summary>
            <param name="pageSetup">Page setup object</param>
            <param name="headerBounds">Header bounds</param>
            <param name="footerBounds">Footer bounds</param>
            <param name="pageBounds">Page bounds</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLeftBorderPoints(Syncfusion.DocIO.DLS.WPageSetup,System.Drawing.RectangleF,System.Drawing.RectangleF,System.Drawing.RectangleF)">
            <summary>
            Gets the bounds to draw left border
            </summary>
            <param name="pageSetup">Page setup object</param>
            <param name="headerBounds">Header bounds</param>
            <param name="footerBounds">Footer bounds</param>
            <param name="pageBounds">Page bounds</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRightBorderPoints(Syncfusion.DocIO.DLS.WPageSetup,System.Drawing.RectangleF,System.Drawing.RectangleF,System.Drawing.RectangleF)">
            <summary>
            Gets the bounds to draw right border
            </summary>
            <param name="pageSetup">Page setup object</param>
            <param name="headerBounds">Header bounds</param>
            <param name="footerBounds">Footer bounds</param>
            <param name="pageBounds">Page bounds</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBottomBorderPoints(Syncfusion.DocIO.DLS.WPageSetup,System.Drawing.RectangleF,System.Drawing.RectangleF,System.Drawing.RectangleF)">
            <summary>
            Gets the bounds to draw bottom border
            </summary>
            <param name="pageSetup">Page setup object</param>
            <param name="headerBounds">Header bounds</param>
            <param name="footerBounds">Footer bounds</param>
            <param name="pageBounds">Page bounds</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTopBorderPoints(Syncfusion.DocIO.DLS.WPageSetup,System.Drawing.RectangleF,System.Drawing.RectangleF,System.Drawing.RectangleF)">
            <summary>
            Gets the bounds to draw top border
            </summary>
            <param name="pageSetup">Page setup object</param>
            <param name="headerBounds">Header bounds</param>
            <param name="footerBounds">Footer bounds</param>
            <param name="pageBounds">Page bounds</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetFontSize(Syncfusion.DocIO.DLS.TextWatermark)">
            <summary>
            Gets the font size for Text Watermark
            </summary>
            <param name="textWatermark">Text Watermark</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AdjustPictureBrightnessAndContrast(System.Drawing.Bitmap,Syncfusion.DocIO.DLS.WPicture,System.Drawing.Imaging.ImageAttributes@,System.Boolean)">
            <summary>
            Adjust the brightness and contrast of the picture.
            </summary>
            <param name="bmp">Represents a image that we need to gets a graphics.</param>
            <param name="picture">The image.</param>
            <param name="imageAttributes">Represents image Attributes</param>
            <param name="isWatermark">if set to <c>true</c> [is picture watermark].</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawImageWatermark(Syncfusion.DocIO.DLS.PictureWatermark,System.Drawing.RectangleF,Syncfusion.DocIO.DLS.WPageSetup)">
            <summary>
            Draws the Picture Watermark
            </summary>
            <param name="pictureWatermark">Picture Watermark</param>
            <param name="bounds">Bounds</param>
            <param name="pageSetup">Page Setup</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawEditableCheckbox(Syncfusion.DocIO.DLS.WCheckBox,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the Editable check box.
            </summary>
            <param name="checkbox">The checkbox.</param>
            <param name="ltWidget">The ltWidget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCheckBox(Syncfusion.DocIO.DLS.WCheckBox,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draws the check box.
            </summary>
            <param name="checkbox">The checkbox.</param>
            <param name="ltWidget">The lt widget.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawPatternFill(Syncfusion.DocIO.DLS.PatternType,System.Drawing.Color,System.Drawing.Color,System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfPath)">
            <summary>
            Draws a fill pattern on the specified bounds using the given foreground and background colors.
            </summary>
            <param name="pattern">Specifies the pattern type to apply for the fill operation.</param>
            <param name="foreColor">The color used for the foreground of the pattern.</param>
            <param name="backColor">The color used for the background of the pattern.</param>
            <param name="bounds">Defines the rectangular area where the pattern fill is applied.</param>
            <param name="path">The path that defines the shape to fill. It can be of type PdfPath, IGraphicsPath, or GraphicsPath depending on the compilation symbol.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawPictureFill(Syncfusion.DocIO.DLS.ImageRecord,Syncfusion.Pdf.Graphics.PdfPath,System.Drawing.RectangleF,Syncfusion.DocIO.DLS.BlipFormat,Syncfusion.DocIO.DLS.WTextBoxFormat)">
            <summary>
            Draw picture fill 
            </summary>
            <param name="imageBytes">Imagebytes</param>
            <param name="path">Shapes path</param>
            <param name="bounds">Layouted widget bounds</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetGradientBrush(Syncfusion.Pdf.Graphics.PdfPath,Syncfusion.DocIO.DLS.GradientFill)">
            <summary>
            Creates a configured with a gradient fill for the specified path, taking into account the desired shape rotation.
            </summary>
            <param name="path">The object that defines the shape to which the gradient will be applied.</param>
            <param name="gradientFill">An instance of that specifies the gradient settings, such as colors and style.</param>
            <param name="hasTransparant">boolean value to define the shape transparency</param>
            <returns>A object that can be used to render the specified path with the configured gradient fill.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLinearGradientBrush(System.Collections.Generic.List{Syncfusion.Pdf.Graphics.PdfColor},Syncfusion.DocIO.DLS.GradientFill,System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfColorBlend)">
            <summary>
            Creates a for rendering a linear gradient fill in a specified path, 
            using defined colors, gradient fill settings, and path boundaries.
            </summary>
            <param name="gradientColors">A list of objects representing the colors to be used in the gradient.</param>
            <param name="gradientFill">An instance of that describes the gradient style and settings.</param>
            <param name="pathBounds">A structure defining the boundaries of the path to which the gradient will be applied.</param>
            <param name="gradientColorBlend">A object that specifies the positions and factors for blending the gradient colors.</param>
            <returns>A object configured to render the path with the specified linear gradient fill.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRectangleGradientBrush(Syncfusion.DocIO.DLS.GradientFill,System.Drawing.RectangleF,System.Drawing.Drawing2D.ColorBlend)">
            <summary>
            Creates a radial gradient brush for a rectangular shape based on the specified gradient fill properties.
            </summary>
            <param name="gradientFill">The gradient fill containing path gradient properties.</param>
            <param name="pathBounds">The rectangular bounds where the gradient should be applied.</param>
            <param name="gradientColorBlend">The color blend information for the gradient.</param>
            <param name="finalGradientColors">The list of colors to be used in the gradient.</param>
            <returns>Returns with the specified gradient properties.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRectangleGradientBrush(Syncfusion.DocIO.DLS.FillFormat,Syncfusion.DocIO.DLS.BackgroundGradient,System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfColorBlend,System.Collections.Generic.List{Syncfusion.Pdf.Graphics.PdfColor})">
            <summary>
            Creates a radial gradient brush for a rectangular shape based on the specified gradient fill properties.
            </summary>
            <param name="gradientFill">The gradient fill containing path gradient properties.</param>
            <param name="pathBounds">The rectangular bounds where the gradient should be applied.</param>
            <param name="gradientColorBlend">The color blend information for the gradient.</param>
            <param name="finalGradientColors">The list of colors to be used in the gradient.</param>
            <returns>Returns with the specified gradient properties.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsAppliedLeftBottomVariant(Syncfusion.DocIO.DLS.PathGradient,Syncfusion.DocIO.DLS.TileRectangle,Syncfusion.DocIO.DLS.BackgroundGradient)">
            <summary>
            Creates a lower-compatible path gradient brush for rendering the gradient effect.
            </summary>
            <param name="pathProperties">The path properties used for the Shape.</param>
            <param name="tileProperties">The tile properties used for the Shape.</param>
            <param name="backgroundGradient">The background gradient properties used for the Textbox, PageBackground.</param>
            <returns>true if a path gradient is applied; otherwise, false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsAppliedRightBottomVariant(Syncfusion.DocIO.DLS.PathGradient,Syncfusion.DocIO.DLS.TileRectangle,Syncfusion.DocIO.DLS.BackgroundGradient)">
            <summary>
            Creates a lower-compatible path gradient brush for rendering the gradient effect.
            </summary>
            <param name="pathProperties">The path properties used for the Shape.</param>
            <param name="tileProperties">The tile properties used for the Shape.</param>
            <param name="backgroundGradient">The background gradient properties used for the Textbox, PageBackground.</param>
            <returns>true if a path gradient is applied; otherwise, false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsAppliedLeftTopVariant(Syncfusion.DocIO.DLS.PathGradient,Syncfusion.DocIO.DLS.TileRectangle,Syncfusion.DocIO.DLS.BackgroundGradient)">
            <summary>
            Creates a lower-compatible path gradient brush for rendering the gradient effect.
            </summary>
            <param name="pathProperties">The path properties used for the Shape.</param>
            <param name="tileProperties">The tile properties used for the Shape.</param>
            <param name="backgroundGradient">The background gradient properties used for the Textbox, PageBackground.</param>
            <returns>true if a path gradient is applied; otherwise, false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsAppliedRightTopVariant(Syncfusion.DocIO.DLS.PathGradient,Syncfusion.DocIO.DLS.TileRectangle,Syncfusion.DocIO.DLS.BackgroundGradient)">
            <summary>
            Creates a lower-compatible path gradient brush for rendering the gradient effect.
            </summary>
            <param name="pathProperties">The path properties used for the Shape.</param>
            <param name="tileProperties">The tile properties used for the Shape.</param>
            <param name="backgroundGradient">The background gradient properties used for the Textbox, PageBackground.</param>
            <returns>true if a path gradient is applied; otherwise, false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPathGradientBrush(System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfColorBlend,System.Collections.Generic.List{Syncfusion.Pdf.Graphics.PdfColor})">
            <summary>
            Creates a radial gradient brush for applying a gradient fill to a path.
            </summary>
            <param name="gradientFill">The gradient fill settings.</param>
            <param name="pathBounds">The bounding rectangle of the path.</param>
            <param name="gradientColorBlend">The color blend defining gradient transitions.</param>
            <param name="finalGradientColors">The list of colors used in the gradient.</param>
            <returns>Returns with the specified gradient settings.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRadialGradientBrush(Syncfusion.Pdf.Graphics.PdfPath,Syncfusion.DocIO.DLS.GradientFill,Syncfusion.Pdf.Graphics.PdfColorBlend,System.Collections.Generic.List{Syncfusion.Pdf.Graphics.PdfColor})">
            <summary>
            Creates a radial gradient brush for a rectangular shape based on the specified gradient fill properties.
            </summary>
            <param name="gradientFill">The gradient fill settings containing path gradient properties.</param>
            <param name="pathBounds">The rectangular bounds where the gradient should be applied.</param>
            <param name="gradientColorBlend">The color blend information defining the gradient transition.</param>
            <param name="finalGradientColors">The list of colors used in the gradient. </param>
            <returns> Returns based on the specified gradient properties.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetScaledRectangle(System.Drawing.RectangleF,System.Single)">
            <summary>
            Scales the given rectangle by a specified factor while keeping it centered.
            </summary>
            <param name="rect">The original rectangle to be scaled.</param>
            <param name="scale">The scaling factor to apply to the rectangle.</param>
            <returns>Returns the updated dimensions and position.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetGradientBrush(Syncfusion.Pdf.Graphics.PdfPath,Syncfusion.DocIO.DLS.BackgroundGradient,Syncfusion.DocIO.DLS.FillFormat,System.Boolean,System.Boolean,System.Boolean,System.Single)">
            <summary>
            Creates a gradient brush for rendering a specified shape or background with appropriate gradient fill 
            based on the type of element (Shape, WTextBoxFormat, or Page).
            </summary>
            <param name="path">The path that defines the shape to which the gradient will be applied.</param>
            <param name="element">The object representing the shape, textbox, or page with gradient fill details.</param>
            <returns>A configured gradient brush object for rendering the fill.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsAppliedPathGradient(Syncfusion.DocIO.DLS.FillFormat,Syncfusion.DocIO.DLS.BackgroundGradient)">
            <summary>
            Creates a lower-compatible linear gradient brush for rendering the gradient effect.
            </summary>
            <param name="fillFormat">The fill format gradient properties used for the Shape.</param>
            <param name="backgroundGradient">The background gradient properties used for the Textbox, PageBackground.</param>
            <returns>true if a path gradient is applied; otherwise, false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsAppliedLinearGradient(Syncfusion.DocIO.DLS.FillFormat,Syncfusion.DocIO.DLS.BackgroundGradient)">
            <summary>
            Creates a lower-compatible path gradient brush for rendering the gradient effect.
            </summary>
            <param name="fillFormat">The fill format gradient properties used for the Shape.</param>
            <param name="backgroundGradient">The background gradient properties used for the Textbox, PageBackground.</param>
            <returns>true if a path gradient is applied; otherwise, false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLinearGradientBrush(System.Collections.Generic.List{Syncfusion.Pdf.Graphics.PdfColor},System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfColorBlend,Syncfusion.DocIO.DLS.BackgroundGradient,Syncfusion.DocIO.DLS.FillFormat)">
            <summary>
            Creates a lower-compatible linear gradient brush for rendering the gradient effect.
            </summary>
            <param name="gradientColors">The gradient color list used for fallback colors.</param>
            <param name="pathBounds">The bounding rectangle of the path to fill.</param>
            <param name="gradientColorBlend">Blend object that defines gradient stops and their respective colors.</param>
            <returns>A configured linear gradient brush.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddPresetGradientColors(System.String,Syncfusion.DocIO.DLS.BackgroundGradient,Syncfusion.DocIO.DLS.FillFormat,System.Collections.Generic.List{Syncfusion.Pdf.Graphics.PdfColor},System.Collections.Generic.List{System.Single})">
            <summary>
            Adds gradient colors and positions based on the focus and gradient source.
            </summary>
            <param name="focus">Gradient focus direction (e.g., "100%", "50%", "-50%").</param>
            <param name="backgroundGradient">Gradient data from background settings.</param>
            <param name="fillFormat">Gradient data from shape fill settings.</param>
            <param name="gradientColors">Output list of colors.</param>
            <param name="gradientPositions">Output list of corresponding positions.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetFocus(Syncfusion.DocIO.DLS.BackgroundGradient,Syncfusion.DocIO.DLS.FillFormat)">
            <summary>
            Returns the gradient focus value based on the background gradient or fill format settings.
            </summary>
            <param name="backgroundGradient">The background gradient with shading style and variant.</param>
            <param name="fillFormat">The fill format containing gradient fill and angle info.</param>
            <returns>The focus value as a string ("100%", "50%", "-50%", or null).</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetGradientBrush(System.Drawing.Drawing2D.GraphicsPath,Syncfusion.DocIO.DLS.BackgroundGradient)">
            <summary>
            Creates a gradient brush based on the given path and background gradient settings.
            </summary>
            <param name="path">The shape path to apply the gradient.</param>
            <param name="backgroundGradient">The gradient fill details.</param>
            <returns>Returns a configured with gradient fill.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddPresetGradientColors(System.String,Syncfusion.DocIO.DLS.BackgroundGradient,System.Collections.Generic.List{System.Drawing.Color},System.Collections.Generic.List{System.Single})">
            <summary>
            Adds gradient colors and positions from the given background gradient based on focus.
            </summary>
            <param name="focus">Gradient focus value (e.g., "100%", "-100%").</param>
            <param name="backgroundGradient">Background gradient with color stops.</param>
            <param name="gradientColors">List to add computed colors.</param>
            <param name="gradientPositions">List to add normalized positions.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ApplyImageTransparency(System.Drawing.Imaging.ImageAttributes,System.Single)">
            <summary>
            Apply transparency for image
            </summary>
            <param name="imageAttributes">Represents image Attributes</param>
            <param name="transparency">Represents image transparency</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPdfLineJoin(Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher.LineJoin)">
            <summary>
            Convert the LineJoin as PdfLineJoin
            </summary>
            <param name="lineJoin"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPdfLineCap(Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher.LineCap)">
            <summary>
            Convert the LineCap as PdfLineCap
            </summary>
            <param name="lineCap"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawChildShape(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw child shape
            </summary>
            <param name="childShape"></param>
            <param name="ltWidget"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsShapeNeedToBeFill(Syncfusion.DocIO.DLS.AutoShapeType)">
            <summary>
            
            </summary>
            <param name="shapeType"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTransformMatrix(System.Drawing.RectangleF,System.Single,System.Boolean,System.Boolean)">
            <summary>
            Rotate the shape based on Flip positions
            </summary>
            <param name="bounds"></param>
            <param name="ang"></param>
            <param name="flipH"></param>
            <param name="flipV"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetGraphicsPath(Syncfusion.DocIO.DLS.Entity,System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfPen@)">
            <summary>
            
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasureImage(Syncfusion.DocIO.DLS.WPicture)">
            <summary>
            Measures the image.
            </summary>
            <param name="image">The image.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasurePictureBulletSize(Syncfusion.DocIO.DLS.WPicture,System.Drawing.Font)">
            <summary>
            Measures the picture bullet size
            </summary>
            <param name="picture">Picture</param>
            <param name="font">Font</param>
            <returns>The size of picture bullet</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasureString(System.String,System.Drawing.Font,System.Drawing.StringFormat,Syncfusion.Office.FontScriptType)">
            <summary>
            Measures the string.
            </summary>
            <param name="text">The text.</param>
            <param name="font">The font.</param>
            <param name="format">The format.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasureString(System.String,System.Drawing.Font,System.Drawing.StringFormat,Syncfusion.DocIO.DLS.WCharacterFormat,System.Boolean,Syncfusion.Office.FontScriptType)">
            <summary>
            Measures the string.
            </summary>
            <param name="text">The text.</param>
            <param name="font">The font.</param>
            <param name="format">The format.</param>
            <param name="charFormat">The character format.</param>
            <param name="isMeasureFromTabList">isMeasureFromTabList</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetExactStringBounds(System.String,System.Drawing.Font)">
            <summary>
            Gets the exact bounds of a string without an line spacing and top/bottom spacing values of font.
            </summary>
            <param name="text">Specify the input string.</param>
            <param name="font">Specify the font to measure.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasureString(System.String,System.Drawing.Font,System.Drawing.StringFormat,Syncfusion.DocIO.DLS.WCharacterFormat,System.Boolean,System.Boolean,Syncfusion.Office.FontScriptType)">
            <summary>
            Measures the string.
            </summary>
            <param name="text">The text.</param>
            <param name="font">The font.</param>
            <param name="format">The format.</param>
            <param name="charFormat">The character format.</param>
            <param name="isMeasureFromTabList">if set to <c>true</c> [is measure from tab list].</param>
            <param name="isMeasureFromSmallCapString">if set to <c>true</c> [is measure from small cap string].</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetFallbackPdfFont(Syncfusion.Pdf.Graphics.PdfFont,System.Drawing.Font,System.String,Syncfusion.Office.FontScriptType,Syncfusion.Pdf.Graphics.PdfStringFormat)">
            <summary>
            Gets fall back font to preserve the text in converted PDF document.
            </summary>
            <param name="pdfFont">Represent original Pdf Font.</param>
            <param name="systemFont">Represent original System font.</param>
            <param name="inputText">Represent a input text.</param>
            <param name="scriptType">Represent the scriptType of a input text.</param>
            <param name="pdfStringFormat">Represent PdfStringFormat.</param>
            <returns>Returns a fall back font instance, if it has; otherwise returns original Pdf Font.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetFallbackPdfFont(Syncfusion.Pdf.Graphics.PdfFont,System.Drawing.Font,System.String,Syncfusion.Office.FontScriptType,Syncfusion.Pdf.Graphics.PdfStringFormat,System.Collections.Generic.List{Syncfusion.Office.FallbackFont},System.Collections.Generic.Dictionary{System.String,System.IO.Stream},System.Boolean,System.Boolean)">
            <summary>
            Gets fall back font to preserve the text in converted PDF document.
            </summary>
            <param name="pdfFont">Represent original Pdf Font.</param>
            <param name="systemFont">Represent original System font.</param>
            <param name="inputText">Represent a input text.</param>
            <param name="pdfStringFormat">Represent PdfStringFormat.</param>
            <param name="fontStreams">Represent Substituted or embedded font stream.</param>
            <returns>Returns a fall back font instance, if it has; otherwise returns original Pdf Font.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetFallBackFontFromSubstitutionOrEmbedded(System.String,System.String,System.Drawing.Font,System.Collections.Generic.Dictionary{System.String,System.IO.Stream})">
            <summary>
            Get fall back font from font substituted or embedded font stream.
            </summary>
            <param name="inputText">Represent a input text.</param>
            <param name="fallbackFontName">Represent the fallback font name.</param>
            <param name="tempFont">Represent the fallback font instances.</param>
            <param name="fontStreams">Represent substituted or embedded font stream.</param>
            <returns>Returns a fallback font instance, if it exists in the substituted or embedded font stream collection; otherwise returns null.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsContainFont(Syncfusion.Pdf.Graphics.PdfFont,System.String,Syncfusion.Pdf.Graphics.PdfStringFormat)">
            <summary>
            Check whether all the characters (glyphs) of input text is available in input font or not.
            </summary>
            <param name="pdfFont">Represent the input font to check.</param>
            <param name="inputText">Represent the input text to check.</param>
            <param name="pdfStringFormat">Represent the PdfStringFormat.</param>
            <returns>Returns true, if all input character glyphs are available in input font; Otherwise false.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetFactor(System.String)">
            <summary>
            Get the factor.
            </summary>
            <param name="fontName">Represents a font name.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetSubSuperScriptFontSize(System.Drawing.Font)">
            <summary>
            Calculates the font size for subscript and superscript font.
            </summary>
            <param name="font">Represets a normal font to change as subscript and superscript size.</param>
            <returns>Returns font size of subscript and superscript for corresponding inputed font.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetExceededLineHeightForArialUnicodeMSFont(System.Drawing.Font,System.Boolean)">
            <summary>
            Get the Exceeded line height of the Arial unicode MS font.
            </summary>
            <param name="font">The font.</param>
            <param name="isAscent">isAscent.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasureString(System.String,System.Drawing.Font,System.Drawing.Font,System.Drawing.StringFormat,Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.Office.FontScriptType)">
            <summary>
            Measures the string.
            </summary>
            <param name="text">The text.</param>
            <param name="font">The font.</param>
            <param name="defaultFont">The default font</param>
            <param name="format">The format.</param>
            <param name="charFormat">The Character format</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasureSmallCapString(System.String,System.Drawing.SizeF@,System.Drawing.Font,System.Drawing.StringFormat,Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.Office.FontScriptType)">
            <summary>
            Measures the small cap string.
            </summary>
            <param name="text">The text.</param>
            <param name="size">The size.</param>
            <param name="font">The font.</param>
            <param name="format">The format.</param>
            <param name="charFormat">The character format.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasureUnicodeString(System.String,System.Drawing.Font,System.Drawing.Font,System.Drawing.StringFormat,Syncfusion.DocIO.DLS.WCharacterFormat,Syncfusion.Office.FontScriptType)">
            <summary>
            Draw Unicode Text
            </summary>
            <param name="text"></param>
            <param name="font"></param>
            <param name="defaultFont"></param>
            <param name="format"></param>
            <param name="charFormat"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MeasureTextRange(Syncfusion.DocIO.DLS.WTextRange,System.String)">
            <summary>
            
            </summary>
            <param name="text"></param>
            <param name="txtRange"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetAscent(System.Drawing.Font,Syncfusion.Office.FontScriptType)">
            <summary>
            Gets the ascent
            </summary>
            <param name="font">The Font.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetDescent(System.Drawing.Font,Syncfusion.Office.FontScriptType)">
            <summary>
            Gets the descent
            </summary>
            <param name="font">The Font.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DisposeGraphics">
            <summary>
            Dispose a instance of Graphics.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MatrixTranslate(System.Drawing.Drawing2D.Matrix,System.Single,System.Single,System.Drawing.Drawing2D.MatrixOrder)">
            <summary>
            Translate the specified matrix with offsetX and offsetY
            </summary>
            <param name="matrix">Represent the matrix to translate</param>
            <param name="x">Represent the offsetX</param>
            <param name="y">Represent the offsetY</param>
            <param name="matrixOrder">Represent the MatrixOrder to traslate</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MatrixMultiply(System.Drawing.Drawing2D.Matrix,System.Drawing.Drawing2D.Matrix,System.Drawing.Drawing2D.MatrixOrder)">
            <summary>
            Multiply the specified matrix with target matrix
            </summary>
            <param name="matrix">Represent the matrix to translate</param>
            <param name="target">Represent the target matrix</param>
            <param name="matrixOrder">Represent the MatrixOrder to traslate</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.MatrixRotate(System.Drawing.Drawing2D.Matrix,System.Single,System.Drawing.PointF,System.Drawing.Drawing2D.MatrixOrder)">
            <summary>
            Rotate the specified matrix with specified angle.
            </summary>
            <param name="matrix"></param>
            <param name="angle">Represent the angle to rotate the matrix</param>
            <param name="point">Represent the center point to rotate a matrix</param>
            <param name="matrixOrder">Represent the MatrixOrder to traslate</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateGraphicsPath">
            <summary>
            Gets a new GraphicsPath object.
            </summary>
            <returns>Returns a new GraphicsPath object.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateBitmap(System.Int32,System.Int32)">
            <summary>
            Gets a new Bitmap object with specified width and height.
            </summary>
            <param name="width">Represents a width of Bitmap.</param>
            <param name="height">Represents a height of Bitmap.</param>
            <returns>Returns a new Bitmap object with specified width and height.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetGraphicsFromImage(System.Drawing.Bitmap)">
            <summary>
            Gets a Graphics of with specified image.
            </summary>
            <param name="bmp">Represents a image that we need to gets a graphics.</param>
            <returns>Returns a Graphics of with specified image.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateSolidBrush(System.Drawing.Color)">
            <summary>
            Gets a new SolidBrush object with specified color.
            </summary>
            <param name="color">Represents a color of SolidBrush.</param>
            <returns>Returns a new SolidBrush object with specified color.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateColorMatrix">
            <summary>
            Gets a new ColorMatrix object.
            </summary>
            <returns>Returns new ColorMatrix object.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateColorMatrix(System.Single[][])">
            <summary>
            Gets a new ColorMatrix object with specified color matrix.
            </summary>
            <param name="newColorMatrix">Represents a color of matrix.</param>
            <returns>Returns new ColorMatrix object with specified color matrix.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateImageAttributes">
            <summary>
            Gets a new ImageAttributes object.
            </summary>
            <returns>Returns a new ImageAttributes object.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateLinearGradientBrush(System.Drawing.RectangleF,System.Drawing.Color,System.Drawing.Color,System.Single,System.Drawing.Drawing2D.ColorBlend)">
            <summary>
            Gets a new LinearGradientBrush object.
            </summary>
            <returns>Returns a new LinearGradientBrush object.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateColorBlend">
            <summary>
            Gets a new ColorBlend object.
            </summary>
            <returns>Returns a new ColorBlend object.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreatePathGradientBrush(System.Drawing.Drawing2D.GraphicsPath)">
            <summary>
            Creates a new PathGradientBrush for the specified graphics path.
            </summary>
            <param name="path">The GraphicsPath for which the gradient brush is created.</param>
            <returns>Returns a new PathGradientBrush instance.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawArrowHead(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@,System.Drawing.PointF[])">
            <summary>
            Draws the arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
            <param name="linePoints">The line points1.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawArrowHead(Syncfusion.DocIO.DLS.Shape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@,System.Drawing.PointF[])">
            <summary>
            Draws the arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
            <param name="linePoints">The line points1.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawOpenEndArrowHead(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the open end arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCloseEndArrowHead(Syncfusion.DocIO.DLS.Shape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the close end arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawStealthEndArrowHead(Syncfusion.DocIO.DLS.Shape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the stealth end arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCloseEndArrowHead(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the close end arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawStealthEndArrowHead(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the stealth end arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawOpenBeginArrowHead(Syncfusion.DocIO.DLS.Shape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the open begin arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawOpenBeginArrowHead(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the open begin arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCloseBeginArrowHead(Syncfusion.DocIO.DLS.Shape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the close begin arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawCloseBeginArrowHead(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the close begin arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawStealthBeginArrowHead(Syncfusion.DocIO.DLS.Shape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the stealth begin arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawStealthBeginArrowHead(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Drawing.PointF@,System.Boolean@,Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Draws the stealth begin arrow head.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="endPoint">The end point.</param>
            <param name="isArrowHeadExist">if set to <c>true</c> [is arrow head exist].</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddCloseArrowHeadPoints(System.Drawing.PointF[],Syncfusion.Pdf.Graphics.PdfPen)">
            <summary>
            Adds the close arrow head points.
            </summary>
            <param name="points">The points.</param>
            <param name="pen">The pen.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddStealthArrowHeadPoints(System.Drawing.PointF[],Syncfusion.Pdf.Graphics.PdfPen)">
            <summary>
            Adds the stealth arrow head points.
            </summary>
            <param name="points">The points.</param>
            <param name="pen">The pen.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddOpenArrowHeadPoints(System.Drawing.PointF[],Syncfusion.Pdf.Graphics.PdfPath@)">
            <summary>
            Adds the open arrow head points.
            </summary>
            <param name="points">The points.</param>
            <param name="path">The path.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetOpenArrowDefaultValues(Syncfusion.DocIO.DLS.LineFormat,System.Single,System.Single@,System.Single@,System.Single@,System.Boolean)">
            <summary>
            Gets the open arrow default values.
            </summary>
            <param name="lineFormat">The lineFormat.</param>
            <param name="lineWidth">Width of the line.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
            <param name="isFromBeginArrow">if set to <c>true</c> [is from begin arrow].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetCloseArrowDefaultValues(Syncfusion.DocIO.DLS.LineFormat,System.Single,System.Single@,System.Single@,System.Single@,System.Boolean)">
            <summary>
            Gets the close arrow default values.
            </summary>
            <param name="lineFormat">The shape lineFormat.</param>
            <param name="lineWidth">Width of the line.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
            <param name="isFromBeginArrow">if set to <c>true</c> [is from begin arrow].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetArrowHeadLength(Syncfusion.DocIO.DLS.LineFormat,System.Boolean)">
            <summary>
            Gets the length of the arrow head.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetCloseNarrowArrowDefaultValues(Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher.LineEndLength,System.Single,System.Single@,System.Single@,System.Single@)">
            <summary>
            Gets the close narrow arrow default values.
            </summary>
            <param name="arrowHeadLength">Length of the arrow head.</param>
            <param name="lineWidth">Width of the line.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetCloseMediumArrowDefaultValues(Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher.LineEndLength,System.Single,System.Single@,System.Single@,System.Single@)">
            <summary>
            Gets the close medium arrow default values.
            </summary>
            <param name="arrowHeadLength">Length of the arrow head.</param>
            <param name="lineWidth">Width of the line.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetCloseWideArrowDefaultValues(Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher.LineEndLength,System.Single,System.Single@,System.Single@,System.Single@)">
            <summary>
            Gets the close wide arrow default values.
            </summary>
            <param name="arrowHeadLength">Length of the arrow head.</param>
            <param name="lineWidth">Width of the line.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetOpenNarrowArrowDefaultValues(Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher.LineEndLength,System.Single,System.Single@,System.Single@,System.Single@)">
            <summary>
            Gets the open narrow arrow default values.
            </summary>
            <param name="arrowHeadLength">Length of the arrow head.</param>
            <param name="lineWidth">Width of the line.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetOpenMediumArrowDefaultValues(Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher.LineEndLength,System.Single,System.Single@,System.Single@,System.Single@)">
            <summary>
            Gets the open medium arrow default values.
            </summary>
            <param name="arrowHeadLength">Length of the arrow head.</param>
            <param name="lineWidth">Width of the line.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetOpenWideArrowDefaultValues(Syncfusion.DocIO.ReaderWriter.DataStreamParser.Escher.LineEndLength,System.Single,System.Single@,System.Single@,System.Single@)">
            <summary>
            Gets the open wide arrow default values.
            </summary>
            <param name="arrowHeadLength">Length of the arrow head.</param>
            <param name="lineWidth">Width of the line.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindAngleToLeftAndRightHeadPoint(System.Boolean,System.Boolean,System.Single,System.Drawing.PointF,System.Drawing.PointF,System.Boolean)">
            <summary>
            Finds the angle to left and right head point.
            </summary>
            <param name="isFlipHorizontal"></param>
            <param name="isFlipVertical"></param>
            <param name="width"></param>
            <param name="point1">The point1.</param>
            <param name="point2">The point2.</param>
            <param name="isFromBeginArrow"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindAngleToLeftAndRightHeadPoint(Syncfusion.DocIO.DLS.Shape,System.Drawing.PointF,System.Drawing.PointF,System.Boolean)">
            <summary>
            Finds the angle to left and right head point.
            </summary>
            <param name="shape">The shape.</param>
            <param name="point1">The point1.</param>
            <param name="point2">The point2.</param>
            <param name="isFromBeginArrow"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindArrowHeadAngleRadians(System.Drawing.PointF,System.Drawing.PointF,System.Boolean)">
            <summary>
            Finds the arrow head angle radians.
            </summary>
            <param name="point1">The point1.</param>
            <param name="point2">The point2.</param>
            <param name="isFromSeparateOrientation">if set to <c>true</c> [is from separate orientation].</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindBaseLineEndPoint(System.Boolean,System.Boolean,System.Single,System.Single,System.Drawing.PointF[],System.Single,System.Boolean)">
            <summary>
            Finds the base line end point.
            </summary>
            <param name="isFlipHorizontal"></param>
            <param name="isFlipVertical"></param>
            <param name="width"></param>
            <param name="height"></param>
            <param name="linePoints">The line points.</param>
            <param name="adjustValue">The adjust value.</param>
            <param name="isFromBeginArrow"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetEndPointForBaseLine(System.Boolean,System.Double,System.Double,System.Single,System.Drawing.PointF[],System.Single@,System.Single@)">
            <summary>
            Gets the end point.
            </summary>
            <param name="isFromBeginArrow">if set to <c>true</c> [is from begin arrow].</param>
            <param name="degree">The degree.</param>
            <param name="length">The length.</param>
            <param name="adjustValue">The adjust value.</param>
            <param name="linePoints">The line points.</param>
            <param name="x">The x.</param>
            <param name="y">The y.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindAngleRadians(System.Drawing.PointF[],System.Boolean)">
            <summary>
            Finds the angle radians.
            </summary>
            <param name="linePoints">The line points.</param>
            <param name="isFromBottomToTop">if set to <c>true</c> [is from bottom to top].</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindArrowHeadPoints(Syncfusion.DocIO.DLS.Shape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Boolean,System.Boolean)">
            <summary>
            Finds the end cap arrow head points.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="isFromOpenArrow">if set to <c>true</c> [is from open arrow].</param>
            <param name="isFromBeginArrow"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindArrowHeadPoints(Syncfusion.DocIO.DLS.ChildShape,Syncfusion.Pdf.Graphics.PdfPen,System.Drawing.RectangleF,System.Drawing.PointF[],System.Boolean,System.Boolean)">
            <summary>
            Finds the end cap arrow head points.
            </summary>
            <param name="shape">The shape.</param>
            <param name="pen">The pen.</param>
            <param name="bounds">The bounds.</param>
            <param name="linePoints">The line points.</param>
            <param name="isFromOpenArrow">if set to <c>true</c> [is from open arrow].</param>
            <param name="isFromBeginArrow"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.FindLeftRightHeadPoints(System.Boolean,System.Boolean,System.Single,System.Drawing.PointF[],System.Drawing.PointF[]@,System.Single,System.Single,System.Boolean)">
            <summary>
            Finds the left right head points.
            </summary>
            <param name="isFlipHorizontal"></param>
            <param name="isFlipVertical"></param>
            <param name="width"></param>
            <param name="linePoints">The line points.</param>
            <param name="points">The points.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="isFromBeginArrow">if set to <c>true</c> [is from begin arrow].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ConstrucBasetLine(System.Boolean,System.Drawing.PointF,System.Drawing.PointF[],System.Drawing.PointF@,System.Drawing.PointF@)">
            <summary>
            Construcs the baset line.
            </summary>
            <param name="isFromBeginArrow">if set to <c>true</c> [is from begin arrow].</param>
            <param name="points">The points.</param>
            <param name="linePoints">The line points.</param>
            <param name="point1"></param>
            <param name="point2"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetArrowDefaultValues(Syncfusion.DocIO.DLS.LineFormat,Syncfusion.Pdf.Graphics.PdfPen,System.Single@,System.Single@,System.Single@,System.Boolean,System.Boolean)">
            <summary>
            Gets the arrow default values.
            </summary>
            <param name="lineFormat">The line Format.</param>
            <param name="pen">The pen.</param>
            <param name="arrowLength">Length of the arrow.</param>
            <param name="arrowAngle">The arrow angle.</param>
            <param name="adjustValue">The adjust value.</param>
            <param name="isFromOpenArrow"></param>
            <param name="isFromBeginArrow">if set to <c>true</c> [is from begin arrow].</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.RadianToDegree(System.Double)">
            <summary>
            Radians to degree.
            </summary>
            <param name="angle">The angle.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Degree2Radian(System.Double)">
            <summary>
            Degree2s the radian.
            </summary>
            <param name="a">A.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetEndPoint(System.Double,System.Single,System.Single,System.Single,System.Single@,System.Single@)">
            <summary>
            Gets the end point.
            </summary>
            <param name="angle">The angle.</param>
            <param name="len">The length.</param>
            <param name="start_x">The start_x.</param>
            <param name="start_y">The start_y.</param>
            <param name="end_x">The end_x.</param>
            <param name="end_y">The end_y.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLinePointsBasedOnFlip(System.Boolean,System.Boolean,System.Drawing.RectangleF)">
            <summary>
            Gets the line points based on flip.
            </summary>
            <param name="isFlipHorizontal"></param>
            <param name="isFlipVertical"></param>
            <param name="bounds">The bounds.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsSoftHyphen(Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Determines whether the text range is soft hyphen and that need to be drawn.
            </summary>
            <param name="ltWidget">The lt widget.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetStringFormat(Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Gets the string format.
            </summary>
            <param name="charFormat">The char format.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetBrush(System.Drawing.Color)">
            <summary>
            Gets the brush.
            </summary>
            <param name="color">The color.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPDFBrush(System.Drawing.Color)">
            <summary>
            Gets the pdf brush.
            </summary>
            <param name="color">The color.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetTextColor(Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Gets the color of the text.
            </summary>
            <param name="charFormat">The char format.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRevisionColor(Syncfusion.DocIO.DLS.RevisionColor)">
            <summary>
            Get the RevisionColor
            </summary>
            <param name="revisionColor">Revision color</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRevisionColor(Syncfusion.DocIO.DLS.RevisionColor,System.Boolean)">
            <summary>
            Get the RevisionColor
            </summary>
            <param name="revisionColor">Revision color</param>
            <param name="isInsertText">Is revision type insert type</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRevisionColor(Syncfusion.DocIO.DLS.RevisionColor,System.Boolean,System.Boolean)">
            <summary>
            Get the RevisionColor
            </summary>
            <param name="revisionColor">Revision color</param>
            <param name="isInsertText">Is revision type insert type</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetRevisionFillColor(Syncfusion.DocIO.DLS.RevisionColor,System.Boolean)">
            <summary>
            Get the RevisionColor to fill a comment balloon.
            </summary>
            <param name="revisionColor">Revision color</param>
            <param name="isInsertText">Is revision type insert type</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateAlternateFont(Syncfusion.DocIO.DLS.WCharacterFormat,System.String,System.Drawing.Font@)">
            <summary>
            Updates the alternate font for the font not installed in the system.
            </summary>
            <param name="charFormat">The char format.</param>
            <param name="fontName">Name of the font.</param>
            <param name="font">The font.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTOC(Syncfusion.DocIO.DLS.WTextRange)">
            <summary>
            Checks the owner paragraph of the textrange is a TOC
            </summary>
            <param name="txtRange">Text Range</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ParagraphContainsTOC(Syncfusion.DocIO.DLS.WTextRange)">
            <summary>
            Determins whether the paragraph is TOC.
            </summary>
            <param name="txtRange"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ParagraphContainsHyperlink(Syncfusion.DocIO.DLS.Entity)">
            <summary>
            Determines the the paragraph contians hyperlink field.
            </summary>
            <param name="entity"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.isTOCParagraphInHyperLink(Syncfusion.DocIO.DLS.WTextRange)">
            <summary>
            To check the current text range is present inside the HyperLink.
            </summary>
            <param name="txtRange"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsTextRangeFound(Syncfusion.DocIO.DLS.WField,Syncfusion.DocIO.DLS.WTextRange,System.Int32@)">
            <summary>
            Check whether current text range is present inside the hyperlink field.
            </summary>
            <param name="hyperLinkField"></param>
            <param name="textRange"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetFont(Syncfusion.Office.FontScriptType,Syncfusion.DocIO.DLS.WCharacterFormat,System.String)">
            <summary>
            Gets the font.
            </summary>
            <param name="scriptType"></param>
            <param name="charFormat">The char format.</param>
            <param name="text"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateBidiFont(Syncfusion.Office.FontScriptType,Syncfusion.DocIO.DLS.WCharacterFormat,System.Drawing.Font,System.Single,System.Drawing.FontStyle)">
            <summary>
            Updates the font name and size based on the Bidi property.
            </summary>
            <param name="scriptType"></param>
            <param name="charFormat">Character format of the current text range.</param>
            <param name="font">Font applied to the current text.</param>
            <param name="fontSize">Font size applied to the current text.</param>
            <param name="fontStyle">Font style applied to the current text.</param>
            <returns>Returns current text range Bidi font.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetStringAlignment(Syncfusion.DocIO.DLS.WParagraphFormat)">
            <summary>
            Gets the string alignment.
            </summary>
            <param name="paraFormat">The para format.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPen(Syncfusion.DocIO.DLS.Border,System.Boolean)">
            <summary>
            Gets the pen.
            </summary>
            <param name="border">The border.</param>
            <param name="isParagraphBorder"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPen(Syncfusion.DocIO.DLS.BorderStyle,System.Single,System.Drawing.Color)">
            <summary>
            Gets the pen.
            </summary>
            <param name="borderType">Type of the border.</param>
            <param name="borderLineWidth">Width of the border line.</param>
            <param name="borderColor">Color of the border.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPen(Syncfusion.DocIO.DLS.UnderlineStyle,System.Single,System.Drawing.Color)">
            <summary>
            Gets the pen.
            </summary>
            <param name="underlineStyle">Type of the underline.</param>
            <param name="lineWidth">Width of the underline.</param>
            <param name="lineColor">Color of the underline.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.ScaleImage(System.Drawing.Image,System.Single,System.Single)">
            <summary>
            Scales the image.
            </summary>
            <param name="srcImage">The image.</param>
            <param name="width">The width.</param>
            <param name="height">The height.</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddLinkToBookmark(System.Drawing.RectangleF,System.String,System.Boolean)">
            <summary>
            Adds link to the bookmark.
            </summary>
            <param name="bounds">The bounds.</param>
            <param name="bookmarkName">The bookmark name.</param>
            <param name="isTargetNull">The target is nothing.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsHyperlinkNeedToBeCreated(System.String,System.Drawing.RectangleF,System.Drawing.RectangleF)">
            <summary>
            Determines whether a new hyperlink needs to be created.
            </summary>
            <param name="bookmarkName"></param>
            <param name="existingSourceBounds"></param>
            <param name="currBounds"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.CreateAndAddLinkToBookmark(System.Drawing.RectangleF,System.String,System.Boolean)">
            <summary>
            Creates bookmark hyperlink and add into list.
            </summary>
            <param name="bounds"></param>
            <param name="bookmarkName"></param>
            <param name="isTargetNull"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddHyperLink(Syncfusion.DocIO.DLS.Hyperlink,System.Drawing.RectangleF)">
            <summary>
            Adds the hyper link to collection.
            </summary>
            <param name="hyperlink">The hyperlink.</param>
            <param name="bounds">The bounds.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.AddHyperLink(Syncfusion.DocIO.DLS.WPicture,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Adds the hyper link to collection.
            </summary>
            <param name="picture">The picture.</param>
            <param name="bounds">The bounds.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateBookmarkTargetBoundsAndPageNumber(Syncfusion.DocIO.DLS.Rendering.DocumentLayouter.BookmarkHyperlink,System.String)">
            <summary>
            Updates the target bounds and page number for current bookmark.
            </summary>
            <param name="bmhyperlink">Bookmark hyperlink.</param>
            <param name="bmHyperlinkValue">Bookmark hyperlink value.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateTOCLevel(Syncfusion.DocIO.DLS.WParagraph,Syncfusion.DocIO.DLS.Rendering.DocumentLayouter.BookmarkHyperlink)">
            <summary>
            Updates the TOC level.
            </summary>
            <param name="paragraph">The paragraph.</param>
            <param name="bookmark">The bookmark.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.UpdateResIndex(System.String,Syncfusion.Layouting.ITextMeasurable,System.Int32,System.Boolean,System.Boolean,System.Double,System.Single,System.Single,System.Boolean)">
            <summary>
            Updates Result index
            </summary>
            <param name="text">text</param>
            <param name="measurer">the measurer</param>
            <param name="resIndex">res index</param>
            <param name="bSplitByChar">bSplitByChar</param>
            <param name="bIsInCell">bIsInCell</param>
            <param name="offset">offset</param>
            <param name="clientWidth">Client Width</param>
            <param name="clientActiveAreaWidth"></param>
            <param name="isSplitByCharacter"></param>
            <returns>res Index</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsLeadingCharacter(System.Char)">
            <summary>
            Determine whether the character is CJK leading character
            A line of text cannot end with any leading characters, which are listed below
            </summary>
            <param name="c"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsBeginCharacter(System.Char)">
            <summary>
            Determine whether the character is Begin CJK character
            A line of text cannot begin with any following characters
            </summary>
            <param name="c"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsOverFlowCharacter(System.Char)">
            <summary>
            Determine whether the character is CJK overflow character
            Overflow characters are allowed to render in the same line when it doesn't have required client width to fit the character
            </summary>
            <param name="c"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsUnicodeText(System.String)">
            <summary>
            
            </summary>
            <param name="text"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPreviousSibling(Syncfusion.DocIO.DLS.WTextRange)">
            <summary>
            Get previous text range
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetCellWidth(Syncfusion.DocIO.DLS.ParagraphItem)">
            <summary>
            Get cell Width
            </summary>
            <param name="paraItem">The paragraph item</param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetPdfFontCollectionKey(System.Drawing.Font,System.Boolean)">
            <summary>
            Concatenates the font name, style, font size and Unicode text and returns the key for PDFFontCollection.
            </summary>
            <param name="font">Font object to extract font name, font size and font style from.</param>
            <param name="isUnicode">check whether it's unicode or not.</param>
            <returns>Key for the PdfFontCollection dictionary to store and retreive the created PdfFont.</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.IsUnicode(System.String)">
            <summary>
            Determines whether the text is unicode
            </summary>
            <param name="text">text</param>
            <returns>
            	<c>true</c> if text is unicode, set to <c>true</c>.
            </returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetWordLength(System.String,System.Int32)">
            <summary>
            Gets length of WORD.
            NOTE:
            - WORD: text run that finished by last space letter 
              (sample: "text  " or "  "; wrong sample: " text" or "text  text" )
            EXCLUSION:
            - If text working part have zero symbols return (-1)
            - If text working part don't consist SPACE letters return legth of 
              text working part
            </summary>
            <param name="text"></param>
            <param name="startIndex">Index of word first letter</param>
            <returns>Length of found word</returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.Close">
            <summary>
            Closes this instance.
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DefaultBorders.Vertical">
            <summary>
            Gets the vertical border
            </summary>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DefaultBorders.Horizontal">
            <summary>
            Gets / sets the horizontal border
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DefaultBorders.#ctor(Syncfusion.DocIO.DLS.RowFormat)">
            <summary>
            
            </summary>
            <param name="format"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DefaultBorders.InitBorder(Syncfusion.DocIO.DLS.Border,Syncfusion.DocIO.DLS.Border)">
            <summary>
            
            </summary>
            <param name="destination"></param>
            <param name="sourse"></param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.DrawBehindWidgets(Syncfusion.Layouting.LayoutedWidgetList,Syncfusion.Layouting.IWidget,System.Int32,System.Boolean)">
            <summary>
            Draws the behind shape widgets.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetOrderIndex(Syncfusion.Layouting.IWidget)">
            <summary>
            Get Order index of the floating item
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLineWidth(Syncfusion.DocIO.ReaderWriter.Biff_Records.BorderCode)">
            <summary>
            Get the line width of the picture border for Inline picture shape
            </summary>
            <param name="border"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext.GetLineWidth(Syncfusion.DocIO.DLS.WPicture)">
            <summary>
            Get the line width of the picture border
            </summary>
            <param name="picture"></param>
            <returns></returns>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.BookmarkPosition.BookmarkStyle">
            <summary>
            Gets or sets the bookmarkStyle.
            </summary>
            <value>The bookmarkStyle.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.BookmarkPosition.Bounds">
            <summary>
            Gets or sets the bounds.
            </summary>
            <value>The bounds.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.BookmarkPosition.PageNumber">
            <summary>
            Gets or sets the page number.
            </summary>
            <value>The page number.</value>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.BookmarkPosition.BookmarkName">
            <summary>
            Gets or sets the name of the bookmark.
            </summary>
            <value>The name of the bookmark.</value>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.BookmarkPosition.#ctor(System.String,System.Int32,System.Drawing.RectangleF)">
            <summary>
            Initializes a new instance of the <see cref="T:Syncfusion.DocToPdfConverter.Rendering.BookmarkPosition"/> class.
            </summary>
            <param name="bookmarkName">Name of the bookmark.</param>
            <param name="pageNumber">The page number.</param>
            <param name="bounds">The bounds.</param>
        </member>
        <member name="T:Syncfusion.DocToPdfConverter.Rendering.SortByColorBrightness">
            <summary>
            Sort the border rendering order based on its color brightness order
            </summary>
        </member>
        <member name="T:Syncfusion.DocToPdfConverter.Rendering.MathRenderer">
            <summary>
            Represents the class which drawing a Math Equations.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.MathRenderer.#ctor(Syncfusion.DocToPdfConverter.Rendering.PDFDrawingContext)">
            <summary>
            Creates a <see cref="T:Syncfusion.DocToPdfConverter.Rendering.MathRenderer"/> class instance to render the WMath entity.
            </summary>
            <param name="drawingContext">Represent the <see cref="T:Syncfusion.DocIO.Rendering.DrawingContext"/></param>
        </member>
        <member name="P:Syncfusion.DocToPdfConverter.Rendering.MathRenderer.DrawingContext">
            <summary>
            Gets a <see cref="T:Syncfusion.DocIO.Rendering.DrawingContext"/> class object for drawing.
            </summary>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.MathRenderer.Draw(Syncfusion.DocIO.DLS.WMath,Syncfusion.Layouting.LayoutedWidget)">
            <summary>
            Draw the WMath instance.
            </summary>
            <param name="math">Represent the WMath instance to draw</param>
            <param name="ltWidget">Represent the layouted widget of WMath instance</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.MathRenderer.Draw(Syncfusion.Layouting.LayoutedOMathWidget)">
            <summary>
            Draw the IOfficeMath instance.
            </summary>
            <param name="layoutedOMathWidget">Represent the layouted widget of OfficeMath instance</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.MathRenderer.DrawDelimiterCharacter(Syncfusion.Layouting.LayoutedStringWidget,System.Single,Syncfusion.DocIO.DLS.WCharacterFormat)">
            <summary>
            Draw the delimiter character with required stretching.
            </summary>
            <param name="delimiterCharacterWidget">Specify the delimiter widget.</param>
            <param name="stretchableHeight">Specify the required height to stretch.</param>
            <param name="format">Specify the character format.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.MathRenderer.Draw(Syncfusion.Layouting.LayoutedLineWidget)">
            <summary>
            Draw the Line used in MathML.
            </summary>
            <param name="lineWidget">Represent the layouted widget of a line.</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.MathRenderer.Draw(Syncfusion.Layouting.LayoutedStringWidget,Syncfusion.DocIO.DLS.WCharacterFormat,System.Single)">
            <summary>
            Draw the layouted string widget.
            </summary>
            <param name="stringWidget">Represent the string widget</param>
            <param name="characterFormat">Represent the characterFormat</param>
            <param name="scalingFactor">Represent the scalingFactor</param>
        </member>
        <member name="M:Syncfusion.DocToPdfConverter.Rendering.MathRenderer.Dispose">
            <summary>
            Dispose a MathRenderer object.
            </summary>
        </member>
        <member name="P:Syncfusion.OfficeRendering.SmartArtPDFRenderer.PDFFontCache">
            <summary>
            Gets or sets the cache for storing PDF TrueType fonts.
            </summary>
        </member>
        <member name="P:Syncfusion.OfficeRendering.SmartArtPDFRenderer.PrivateFonts">
            <summary>
            Gets or sets the custom font collection.
            </summary>
        </member>
        <member name="P:Syncfusion.OfficeRendering.SmartArtPDFRenderer.RecreateNestedMetafile">
            <summary>
            Gets or sets a value that indicates whether to regenerate the nested EMF images present in the word document during PDF conversion. Default value is<b>false</b>.
            </summary>
            <value><b>True</b> if it is necessary to regenerate the nested EMF images present in the word document during PDF conversion; otherwise <b>false</b>.</value>
        </member>
        <member name="P:Syncfusion.OfficeRendering.SmartArtPDFRenderer.FallbackFonts">
            <summary>
            Gets a Fallback font collection of Presentation document.
            </summary>
        </member>
        <member name="P:Syncfusion.OfficeRendering.SmartArtPDFRenderer.FontStreams">
            <summary>
            Gets or set the embedded fonts.
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.ResetTransform">
            <summary>
             Reset Transform position for smart art 
             </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.RotateTransform(System.Single)">
            <summary>
            Rotate Transform for smart art position
            <param name="angle">Represents the angle.</param>
             </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.TranslateTransform(System.Single,System.Single)">
            <summary>
            Translate the transform position
            <param name="dx">Represents the dx.</param>
            <param name="dy">Represents the dy.</param>
             </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.Transform(System.Drawing.Drawing2D.Matrix)">
            <summary>
            Transform smart art position
            <param name="matrix">Represents the matrix.</param>
             </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.DrawImage(System.IO.MemoryStream,System.Drawing.RectangleF)">
            <summary>
            Renders an image from a memory stream onto a specified area of a graphical surface.
            </summary>
            <param name="stream">The memory stream containing the image data to be rendered.</param>
            <param name="bounds">The rectangular bounds that specify where on the surface the image will be drawn and its dimensions.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.MeasureString(System.String,System.Drawing.Font,System.Drawing.StringFormat)">
            <summary>
            Measures the size of the specified text string when drawn with the given font and string format.
            </summary>
            <param name="text">The text string to measure.</param>
            <param name="font">The font applied to the text.</param>
            <param name="stringFormat">The string formatting attributes to apply to the text.</param>
            <returns>A SizeF structure containing the width and height of the text as drawn with the specified font and string format.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.RecreateNestedMetaImage(System.Drawing.Image@,System.Drawing.RectangleF)">
            <summary>
            Regenerate the nested EMF images if it present in the word document during PDF conversion.
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.IsWMFImage(System.Drawing.Image)">
            <summary>
            Check whether the image is a wmf image.
            </summary>
            <param name="image">Represent the input image to check.</param>
            <returns>Returns true, if the image is wmf image; Otherwise false.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.AddParaTag">
            <summary>
            Creates and add the structure element(Auto tag) for Paragragh auto tag
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.AddSectionTag">
            <summary>
            Creates and add the structure element(Auto tag) for Section auto tag
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.AddFigureTag(System.String,System.Boolean)">
            <summary>
            Creates and add the structure element(Auto tag) for Figure
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.AddListTag">
            <summary>
            Creates and add the structure element(Auto tag) for List auto tag
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.AddListItemTag">
            <summary>
            Creates and add the structure element(Auto tag) for List item and List body
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.RemoveParentTag">
            <summary>
            Removes the parent tag from the structure element stack
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.ReSetTag">
            <summary>
            Resets the PDF graphics tag
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.DrawBullet(Syncfusion.Office.OfficeSmartArtParagraph,Syncfusion.Office.OfficeShapeListFormat,System.Drawing.Font,System.Drawing.RectangleF,Syncfusion.Office.OfficeShapeTextCapsType)">
            <summary>
            Renders a bullet point for a given SmartArt paragraph, applying specified formatting styles 
            and typography within the provided bounds.
            </summary>
            <param name="paragraphImpl">The SmartArt paragraph in which the bullet is to be drawn.</param>
            <param name="bulletFormat">The formatting details for the bullet, such as style and appearance.</param>
            <param name="systemFont">The font used for drawing text associated with the bullet, affecting its visual style.</param>
            <param name="bounds">The rectangular area that defines the space allocated for rendering the bullet.</param>
            <param name="capsType">The text capitalization style to apply to the bullet and associated text.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.DrawHighlightColor(System.Drawing.Color,System.Drawing.RectangleF)">
            <summary>
            Draws a solid Rectangle to the PDF with the given rectangle object
            </summary>
            <param name="color">Highlight color of the textpart</param>
            <param name="highlighColorBounds">Rectangle that has to be filled with the highlight color</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.DrawImage(System.Drawing.Image,System.Drawing.RectangleF)">
            <summary>
            Renders the specified image onto the drawing surface within the given rectangular bounds.
            </summary>
            <param name="image">The image to be drawn.</param>
            <param name="bounds">A <see cref="T:System.Drawing.RectangleF"/> that specifies the location and size for drawing the image.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.DrawString(System.String,System.Drawing.Font,System.Object,System.Drawing.RectangleF,System.Drawing.StringFormat,System.Single,System.Single,System.Single)">
            <summary>
            Draws a string at the specified location with specified font, brush, string format, and layout details.
            </summary>
            <param name="text">The text string to draw.</param>
            <param name="systemFont">The font used for drawing the text.</param>
            <param name="brush">The brush used to draw the text.</param>
            <param name="bounds">The rectangle that specifies the bounds of the drawn text.</param>
            <param name="stringFormat">The formatting attributes applied to the text.</param>
            <param name="indent">The amount of indent to be applied to the text position.</param>
            <param name="spacing">The additional spacing to be applied after the text.</param>
            <param name="width">The width of the area allocated to draw the text.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetBrush(Syncfusion.Office.OfficeShapeFont,System.Drawing.RectangleF)">
            <summary>
            Get an appropriate brush object based on the fill style of the given font.
            </summary>
            <param name="font">The OfficeShapeFont instance containing the fill information.</param>
            <param name="bounds">The bounds within which the brush will be applied.</param>
            <returns>A Brush object suitable for the specified fill style of the font.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.DrawSingleShape(Syncfusion.Office.LayoutedOfficeWidget,System.Drawing.RectangleF)">
            <summary>
            Draws a single shape onto the graphics context.
            </summary>
            <param name="officeShape">The layouted office widget representing the shape to be drawn.</param>
            <param name="bounds">The bounds within which the shape should be drawn.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.DrawSmartArtFormat(Syncfusion.Office.OfficeShape,System.Drawing.RectangleF)">
            <summary>
            Draws a SmartArt format shape with the specified bounds, including filling and stroking paths.
            </summary>
            <param name="shapeImpl">The <see cref="T:Syncfusion.Office.OfficeShape"/> instance representing the SmartArt shape to be drawn.</param>
            <param name="bounds">The bounding rectangle defining the position and size of the shape.</param>
            <remarks>
            - The method first retrieves and processes the graphical paths of the SmartArt shape.
            - It fills the background of the shape using the specified fill format if required.
            - It then strokes the paths of the shape using a <see cref="T:Syncfusion.Pdf.Graphics.PdfPen"/> if applicable.
            - Custom geometry and additional path properties (e.g., stroke, fill mode) are handled based on the shape's configuration.
            - The method ensures proper handling of fill modes, custom geometries, and additional graphical paths.
            </remarks>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.DrawPathString(Syncfusion.Office.OfficeSmartArtTextPart,Syncfusion.Office.OfficeSmartArtParagraph,System.String,System.Drawing.Font,System.Object,System.Drawing.RectangleF)">
            <summary>
            Draws a string for a particular SmartArt text part within specified bounds using a specified font and brush.
            </summary>
            <param name="textPart">The SmartArt text part associated with the text string to be drawn.</param>
            <param name="paragraphImpl">The SmartArt paragraph to which the text belongs.</param>
            <param name="text">The actual text string to be rendered.</param>
            <param name="systemFont">The font style and size to be applied when rendering the text.</param>
            <param name="brush">The brush object that determines the color and texture of the drawn text.</param>
            <param name="bounds">The rectangle defining the bounds within which the text will be drawn.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetSolidBrush(System.Drawing.Color)">
            <summary>
            Gets a solid brush for a specified color.
            </summary>
            <param name="color">The color for which the solid brush is created.</param>
            <returns>A SolidBrush object that is created using the specified color.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetFallbackFont(Syncfusion.Pdf.Graphics.PdfTrueTypeFont,System.Collections.Generic.List{Syncfusion.Office.FallbackFont},System.Drawing.Font,System.String,Syncfusion.Pdf.Graphics.PdfStringFormat,System.Boolean,System.Boolean)">
            <summary>
            Gets fall back font to preserve the text in converted PDF document.
            </summary>
            <param name="pdfFont">Represent original Pdf Font.</param>
            <param name="systemFont">Represent original System font.</param>
            <param name="inputText">Represent a input text.</param>
            <param name="pdfStringFormat">Represent PdfStringFormat.</param>
            <param name="isEmbedFont">Represent isEmbedFont.</param>
            <param name="isEmbedCompleteFont">Represent isEmbedCompleteFont.</param>
            <returns>Returns a fall back font instance, if it has; otherwise returns original Pdf Font.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.IsContainFont(Syncfusion.Pdf.Graphics.PdfTrueTypeFont,System.String,Syncfusion.Pdf.Graphics.PdfStringFormat)">
            <summary>
            Check whether all the characters (glyphs) of input text is available in input font or not.
            </summary>
            <param name="pdfFont">Represent the input font to check.</param>
            <param name="inputText">Represent the input text to check.</param>
            <param name="pdfStringFormat">Represent the PdfStringFormat.</param>
            <returns>Returns true, if all input character glyphs are available in input font; Otherwise false.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.InverseCharacter(System.Char)">
            <summary>
            Inverse the specified character with suitable bidi character
            </summary>
            <param name="ch">Specify the input character</param>
            <returns>Return the inversed character</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetTextureBrush(System.Drawing.Image,System.Single,Syncfusion.Office.OfficeShapePictureFill,System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfPath)">
            <summary>
            Creates and returns a texture brush for a given image with specified transparency and fill options.
            </summary>
            <param name="image">The input image to be used for the texture brush.</param>
            <param name="transparancy">The transparency level for the texture brush (0 to 1).</param>
            <param name="textureFill">The texture fill options for the shape, including tiling or formatting details.</param>
            <param name="bounds">The bounding rectangle for the shape that the texture applies to.</param>
            <param name="path">The clipping path to define the texture brush boundaries.</param>
            <returns>
            A <see cref="T:Syncfusion.Pdf.Graphics.PdfBrush"/> object configured with the specified texture or <c>null</c> if no texture is applied.
            </returns>
            <remarks>
            - If tiling options are provided, the method applies scaling and translation transformations based on the tile settings.
            - If the image dimensions are larger than the shape bounds, the method avoids resizing to preserve image quality.
            - The method ensures proper clipping and transparency settings while drawing the texture.
            </remarks>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.FillBackground(Syncfusion.Office.IOfficeShape,Syncfusion.Pdf.Graphics.PdfPath,Syncfusion.Office.IOfficeShapeFill)">
            <summary>
            Fills the background of an office shape based on the specified fill format.
            </summary>
            <param name="shape">
            The office shape to which the background fill is applied. If the shape is null, a default background color is used.
            </param>
            <param name="path">
            The <see cref="T:Syncfusion.Pdf.Graphics.PdfPath"/> representing the path of the shape to fill.
            </param>
            <param name="format">
            The <see cref="T:Syncfusion.Office.IOfficeShapeFill"/> object that specifies the fill type and its corresponding settings.
            </param>
            <remarks>
            This method supports multiple fill types, including:
            <list type="bullet">
            <item>
            <description><see cref="F:Syncfusion.Office.OfficeShapeFillType.Solid"/>: Fills the shape with a solid color.</description>
            </item>
            <item>
            <description><see cref="F:Syncfusion.Office.OfficeShapeFillType.Picture"/>: Fills the shape with a texture or image.</description>
            </item>
            <item>
            <description><see cref="F:Syncfusion.Office.OfficeShapeFillType.Gradient"/>: Fills the shape with a gradient color based on gradient stops.</description>
            </item>
            <item>
            <description><see cref="F:Syncfusion.Office.OfficeShapeFillType.None"/>: Clears the fill if the shape is null.</description>
            </item>
            </list>
            </remarks>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.ConvertToPdfHatchStyle(Syncfusion.Office.OfficeShapePatternFillType)">
            <summary>
            Converts a given <see cref="T:Syncfusion.Office.OfficeShapePatternFillType"/> to its corresponding <see cref="T:Syncfusion.Pdf.Graphics.PdfHatchStyle"/>.
            </summary>
            <param name="officePattern">The <see cref="T:Syncfusion.Office.OfficeShapePatternFillType"/> to be converted.</param>
            <returns>
            A <see cref="T:Syncfusion.Pdf.Graphics.PdfHatchStyle"/> equivalent to the provided <see cref="T:Syncfusion.Office.OfficeShapePatternFillType"/>.
            </returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.FillSolidBackground(Syncfusion.Office.IOfficeShape,Syncfusion.Pdf.Graphics.PdfPath,Syncfusion.Office.IOfficeShapeFill)">
            <summary>
            Fills a solid background for the specified shape or path using the provided fill format.
            </summary>
            <param name="shape">
            The <see cref="T:Syncfusion.Office.IOfficeShape"/> object representing the shape to be filled. 
            Pass null to apply the fill directly to the path.
            </param>
            <param name="path">
            The <see cref="T:Syncfusion.Pdf.Graphics.PdfPath"/> object representing the path to be filled.
            </param>
            <param name="format">
            The <see cref="T:Syncfusion.Office.IOfficeShapeFill"/> object containing the fill formatting details, 
            such as the solid fill color.
            </param>
            <remarks>
            If the shape is not null, the method applies the solid fill color to the shape.
            If the shape is null, the fill is applied directly to the path.
            </remarks>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.FillTextureBackground(Syncfusion.Pdf.Graphics.PdfPath,Syncfusion.Office.OfficeShapePictureFill)">
            <summary>
            Fills a PDF path with a texture background using the specified texture fill configuration.
            This method handles different image formats, applies transparency, and ensures compatibility
            with specific frameworks (e.g., .NET Standard 14 and Azure compatibility).
            </summary>
            <param name="path">
            The <see cref="T:Syncfusion.Pdf.Graphics.PdfPath"/> object representing the path to be filled with the texture background.
            </param>
            <param name="textureFill">
            An <see cref="T:Syncfusion.Office.OfficeShapePictureFill"/> object containing texture fill data, such as image bytes,
            image format, transparency, and cropping information.
            </param>
            <remarks>
            - Handles TIFF and Metafile image formats for specific cases.
            - Converts incompatible image formats (e.g., Metafile) to PNG for better compatibility.
            - Applies transparency settings from the texture fill object.
            - Utilizes cropping options to adjust the texture bounds if specified.
            - Ensures proper disposal of image and stream objects to prevent resource leaks.
            </remarks>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetGradientBrush(Syncfusion.Pdf.Graphics.PdfPath,Syncfusion.Office.OfficeShapeGradientFill)">
            <summary>
            Creates a configured with a gradient fill for the specified path, taking into account the desired shape rotation.
            </summary>
            <param name="path">The object that defines the shape to which the gradient will be applied.</param>
            <param name="gradientFill">An instance of that specifies the gradient settings, such as colors and style.</param>
            <returns>A object that can be used to render the specified path with the configured gradient fill.</returns>
        </member>
        <!-- Badly formed XML comment ignored for member "M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetLinearGradientBrush(System.Collections.Generic.List{Syncfusion.Pdf.Graphics.PdfColor},Syncfusion.Office.OfficeShapeGradientFill,System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfColorBlend)" -->
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetRadialGradientBrush(Syncfusion.Pdf.Graphics.PdfPath,Syncfusion.Office.OfficeShapeGradientFill,Syncfusion.Pdf.Graphics.PdfColorBlend,System.Collections.Generic.List{Syncfusion.Pdf.Graphics.PdfColor})">
            <summary>
            Creates a radial gradient brush for applying a gradient fill to a specified path.
            </summary>
            <param name="path">The path to which the radial gradient should be applied.</param>
            <param name="gradientFill">The gradient fill settings, including color and position details.</param>
            <param name="gradientColorBlend">The color blend information defining the gradient transitions.</param>
            <param name="finalGradientColors">A list of colors used in the gradient fill.</param>
            <returns>Returns a <see cref="T:Syncfusion.Pdf.Graphics.PdfRadialGradientBrush"/> configured with the specified gradient settings.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetScaledRectangle(System.Drawing.RectangleF,System.Single)">
            <summary>
            Scales the given rectangle by a specified factor while keeping it centered.
            </summary>
            <param name="rect">The original rectangle to be scaled.</param>
            <param name="scale">The scaling factor to apply to the rectangle.</param>
            <returns>Returns the updated dimensions and position.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.CreatePen(Syncfusion.Office.IOfficeShape,Syncfusion.Office.IOfficeShapeLineFormat,Syncfusion.Pdf.Graphics.PdfPath)">
            <summary>
            Creates a Pen object for the specified shape and line format.
            </summary>
            <param name="shape">The shape for which the pen is being created.</param>
            <param name="lineFormat">The line format which contains the styling details for the pen.</param>
            <param name="path">The graphics path that the pen will be applied to.</param>
            <returns>Returns a pen with the specified styling, or null if no pen is needed.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetPresetGeomentryPath(System.Drawing.RectangleF,Syncfusion.Pdf.Graphics.PdfPen@,Syncfusion.Pdf.Graphics.PdfGraphics,Syncfusion.Office.OfficeShape)">
            <summary>
            Gets the preset geometry path for the specified shape.
            </summary>
            <param name="bounds">The bounds of the shape.</param>
            <param name="pen">The pen used to draw the shape.</param>
            <param name="gr">The graphics context used to draw the shape.</param>
            <param name="shapeImpl">The shape implementation.</param>
            <returns>The geometry path for the specified shape.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.SetCustomGeometry(System.String,Syncfusion.Office.OfficeShape)">
            <summary>
            Sets the custom geometry for the specified shape.
            </summary>
            <param name="pathList">The string containing the path list in XML format.</param>
            <param name="shapeImpl">The shape implementation.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.ParsePath2D(System.Xml.XmlReader,Syncfusion.Office.OfficeShape,System.Collections.Generic.Dictionary{System.String,System.String})">
            <summary>
            Parses the 2D path elements from the XML reader and adds them to the specified shape.
            </summary>
            <param name="reader">The XML reader to read the path elements from.</param>
            <param name="shape">The shape to which the path elements will be added.</param>
            <param name="combinedValues">A dictionary of combined values used for parsing.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.Parse2DElements(System.Xml.XmlReader,Syncfusion.Office.OfficeShapePath2D,System.Collections.Generic.Dictionary{System.String,System.String})">
            <summary>
            Parses the 2D path elements from the XML reader and adds them to the specified path.
            </summary>
            <param name="reader">The XML reader to read the path elements from.</param>
            <param name="path">The path to which the elements will be added.</param>
            <param name="combinedValues">A dictionary of combined values used for parsing.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.ParsePath2DPoint(System.Xml.XmlReader,System.Collections.Generic.List{System.Double},System.Collections.Generic.Dictionary{System.String,System.String},Syncfusion.Office.OfficeShapePath2D,System.Collections.Generic.Dictionary{System.String,System.Single})">
            <summary>
            Parses the 2D path points from the XML reader and adds them to the specified path elements.
            </summary>
            <param name="reader">The XML reader to read the path points from.</param>
            <param name="pathElements">The list of path elements to which the points will be added.</param>
            <param name="combinedValues">A dictionary of combined values used for parsing.</param>
            <param name="path">The path to which the elements will be added.</param>
            <param name="calculatedValues">A dictionary of calculated values used for parsing.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.ParsePathPoints(System.Xml.XmlReader,System.Collections.Generic.List{System.Double},System.Collections.Generic.Dictionary{System.String,System.String},Syncfusion.Office.OfficeShapePath2D,System.Collections.Generic.Dictionary{System.String,System.Single})">
            <summary>
            Parses the path points from the XML reader and adds them to the specified path elements.
            </summary>
            <param name="reader">The XML reader to read the path points from.</param>
            <param name="pathElements">The list of path elements to which the points will be added.</param>
            <param name="combinedValues">A dictionary of combined values used for parsing.</param>
            <param name="path">The path to which the elements will be added.</param>
            <param name="calculatedValues">A dictionary of calculated values used for parsing.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetCustomGeomentryPath(System.Drawing.RectangleF,Syncfusion.Office.OfficeShape)">
            <summary>
            Gets the custom geometry paths for the specified shape.
            </summary>
            <param name="bounds">The bounds of the shape.</param>
            <param name="shapeImpl">The shape implementation.</param>
            <returns>An array of PdfPath objects representing the custom geometry paths for the shape.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetGeomentryPathYValue(System.Double,System.Double,System.Drawing.RectangleF)">
            <summary>
            Calculates the Y-coordinate value for the geometry path based on the specified path height, Y value, and bounding rectangle.
            </summary>
            <param name="pathHeight">The height of the path.</param>
            <param name="y">The Y-coordinate value to be converted.</param>
            <param name="bounds">The bounding rectangle within which the path is drawn.</param>
            <returns>The calculated Y-coordinate value within the bounds.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetGeomentryPathXValue(System.Double,System.Double,System.Drawing.RectangleF)">
            <summary>
            Calculates the X-coordinate value for the geometry path based on the specified path width, X value, and bounding rectangle.
            </summary>
            <param name="pathWidth">The width of the path.</param>
            <param name="x">The X-coordinate value to be converted.</param>
            <param name="bounds">The bounding rectangle within which the path is drawn.</param>
            <returns>The calculated X-coordinate value within the bounds.</returns>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.GetGeomentryPath(Syncfusion.Pdf.Graphics.PdfPath,System.Collections.Generic.List{System.Double},System.Double,System.Double,System.Drawing.RectangleF)">
            <summary>
            Generates the geometry path for the specified PdfPath object based on the provided path elements, dimensions, and bounds.
            </summary>
            <param name="path">The PdfPath object to which the geometry path will be added.</param>
            <param name="pathElements">The list of path elements defining the geometry.</param>
            <param name="pathWidth">The width of the path.</param>
            <param name="pathHeight">The height of the path.</param>
            <param name="bounds">The bounding rectangle within which the path is drawn.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.SmartArtPDFRenderer.CreateAutoTag(Syncfusion.Pdf.PdfTagType,System.String)">
            <summary>
            Creates and returns the PDF structure element for the required AutoTag
            </summary>
        </member>
        <member name="T:Syncfusion.OfficeRendering.InkPDFRenderer">
            <summary>
            Renders ink shapes from a Word document into a PDF context.
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.InkPDFRenderer.#ctor(Syncfusion.Pdf.Graphics.PdfGraphics)">
            <summary>
            Initializes a new instance of the <see cref="T:Syncfusion.OfficeRendering.InkPDFRenderer"/> class using the supplied PDF graphics surface.
            </summary>
            <param name="pdfGraphics">Target graphics context in which ink content must be rendered.</param>
        </member>
        <member name="M:Syncfusion.OfficeRendering.InkPDFRenderer.DrawTrace(System.Drawing.PointF[],Syncfusion.Office.OfficeInkBrush,System.Single)">
            <summary>
            Draws an individual ink stroke using the supplied brush and pen width.
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.InkPDFRenderer.TranslateTransform(System.Drawing.RectangleF)">
            <summary>
            Sets up the transformation for ink rendering.
            </summary>
        </member>
        <member name="M:Syncfusion.OfficeRendering.InkPDFRenderer.GetBrushForEffect(System.String,System.Drawing.RectangleF)">
            <summary>
            Creates the PDF brush (solid or gradient) corresponding to a named ink effect.
            </summary>
        </member>
    </members>
</doc>
